Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Al2O3" wg kryterium: Temat


Wyświetlanie 1-4 z 4
Tytuł:
TEM investigation of phases formed during aluminium wetting of MgO at [100], [110] and [111] orientations
Analiza fazowa metodą TEM produktów reakcji powstałych w czasie zwilżania przez aluminium podłoży MgO o orientacji [100], [100] i [111]
Autorzy:
Morgiel, J.
Sobczak, N.
Pomorska, M.
Nowak, R.
Wojewoda-Budka, J.
Tematy:
Al/MgO reaction
α-Al2O3
MgAl2O4
microstructure
TEM
EDS
reakcja Al/MgO
Al2O3
Pokaż więcej
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Powiązania:
https://bibliotekanauki.pl/articles/354574.pdf  Link otwiera się w nowym oknie
Opis:
The interaction of liquid aluminium (5N) with single crystal MgO substrates of [100], [110] and [111] orientations (surface roughness <1 nm) were studied using sessile drop wettability test performed at 1000ºC for 1 hour in vacuum (5 x 10-6 mbar). The observations performed using scanning electron microscopy (SEM) showed that the interaction of liquid metal with MgO crystals in all cases resulted in the formation of reaction products region (RPR) of thickness varying from 40 up to 80 microns in depth. In each case the RPR consisted mainly of coarse dendrite-like crystallites of few microns thick surrounded by net of much thinner channels. Occasionally away from the RPR centre the areas built of much finner but also dendrite- or filament-like crystallites were noted. The thin foils for transmission electron microscopy (TEM) investigations were cut using focused ion beam system (FIB) both from drop/RPR as well as RPR/MgO interfacial regions. The electron diffractions proved that the dominating coarse dendrite-like crystallites are of the same α-Al2O3 type throughout the whole RPR for all substrates orientations. Similarly, the colonies of finer crystallites always showed diffraction patterns characteristic for MgAl2O4 spinel. Therefore, the performed investigation indicated, that both the reaction layer depth and the reaction path represented by the sequence and type of phases present in Al/MgO RPR remain roughly similar for all examined orientations, i.e. that the substrate orientation control neither reaction kinetics, nor affects final phase composition of RPR.
Oddziaływanie ciekłego aluminium (5N) z mono-krystalicznymi podłożami o orientacji [100], [110] i [111] (chropowatość <1nm) badano metodą kropli leżącej w 1000ºC przez 1 godzine w dynamicznej próżni rzędu 10-4 Pa. Obserwacje z wykorzystaniem mikroskopii skaningowej (SEM) wykazały, że oddziaływanie ciekłego metalu z kryształami MgO we wszystkich przypadkach prowadziło do wytworzenia strefy produktów reakcji (tzw. reaction produkt region - RPR) o grubości od 40 do 80 mum. W strefach tych wystepowały wydzielenia o kształcie dendrytycznym rozdzielone waskimi kanałami aluminium. Na krawędziach strefy reakcji stwierdzono obecność kolejnej strefy o grubości kilku- kilkunastu-mikrometrów wypełnionej materiałem o jeszcze drobniejszej włóknistej strukturze. Obserwacje mikrostruktury prowadzono z wykorzystaniem mikroskopii transmisyjnej na cienkich foliach wycietych technika FIB zarówno z granic obu stref, oraz z granicy RPR/MgO. Obserwacje te, w powiązaniu z analizą dyfrakcji elektronowych wykazały, że dla MgO wszystkich orientacji dominujace w RPR duże wydzielenia o kształcie dendrytycznym odpowiadaja fazie α- Al2O3. Równoczesnie, analiza dyfrakcji drobniejszych krystalitów zlokalizowanych w pod-strefie ulokowanej na granicach poza centrum RPR wykazała, że mają one budowe charakterystyczna dla spinelu MgAl2O4. Przeprowadzone badania wykazały, że zarówno grubość RPR, a w tym jej pod-strefy drobniejszych wydzieleń na jej obrzeżach, jak też drogą reakcji reprezentowana przez sekwencje i typ wydzielających się faz w czasie oddziaływania ciekłego aluminium jest identyczna dla wszystkich analizowanych monokrystalicznych podłoży MgO, tj. orientacja tych podłoży nie ma wpływu ani na skład fazowy produktów reakcji ani też na kinetykę tego procesu.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of SiO2/Al2O3 Molar Ratio on Phase Composition and Surfaces Quality of Aluminum Silicate Sanitary Glazes in the SiO2-Al2O3-CaO-Na2O System
Autorzy:
Leśniak, M.
Partyka, J.
Sitarz, M.
Tematy:
glazes
SiO2/Al2O3 molar ratio
microstructure
surface
roughness
Pokaż więcej
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Powiązania:
https://bibliotekanauki.pl/articles/355820.pdf  Link otwiera się w nowym oknie
Opis:
This paper presents the results of research on aluminum silicate sanitary glazes in the SiO2-Al2O3-CaO-Na2O system with different SiO2/Al2O3 molar ratio. XRD, SEM-EDS and FITR measurement indicated that SiO2/Al2O3 molar ratio has a significant impact on the phase composition of the obtained glazes. Glass-ceramic glazes were obtained that consisted of both the glass phase and pseudowollastonite (Ca3[SiO3]3) or anorthite (Ca[Al2Si2O8]) crystals. Subsequently, the influence of phase composition on surface quality (roughness) was examined for the obtained samples. On the basis of the conducted examination of glaze surface roughness was observed that glazes of extreme SiO2/Al2O3 molar ratio are characterized with greatest surface roughness when compared to other glazes.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microstructure and Properties of Ni and Ni/Al2O3 Coatings Electrodeposited at Various Current Densities
Autorzy:
Góral, A.
Berent, K.
Nowak, M.
Kania, B.
Tematy:
Ni coating
Ni/Al2O3 composite coatings
microstructure
corrosion resistance
Pokaż więcej
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Powiązania:
https://bibliotekanauki.pl/articles/958217.pdf  Link otwiera się w nowym oknie
Opis:
The study presents investigations of an influence of various direct current densities on microstructure, residual stresses, texture, microhardness and corrosion resistance of the nickel coatings electrodeposited from modified Watt’s baths. The properties of obtained coatings were compared to the nano-crystalline composite Ni/Al2O3 coatings prepared under the same plating conditions. The similarities and differences of the obtained coatings microstructures visible on both their surfaces and cross sections and determined properties were presented. The differences in the growth character of the Ni matrix and in the microstructural properties were observed. All electrodeposited Ni and Ni/Al2O3 coatings were compact and well adhering to the steel substrates. The thickness and the microhardness of the Ni and Ni/Al2O3 deposits increased significantly with the current density in the range 2 - 6 A/dm2. Residual stresses are tensile and they reduced as the current density increased. The composite coatings revealed better protection from the corrosion of steel substrate than pure nickel in solution 1 M NaCl.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigation the effect addition of nano Al2O3 on microstructure of Yttria tetragonal Zirconia polycrystalline ceramic
Autorzy:
Alshaibani, I.J.
Tematy:
tetragonal
zirconia
composite
nano Al2O3
microstructure
grain size
układ tetragonalny
cyrkonia
kompozyt
mikrostruktura
wielkość ziarna
Pokaż więcej
Wydawca:
Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Powiązania:
https://bibliotekanauki.pl/articles/2175801.pdf  Link otwiera się w nowym oknie
Opis:
Purpose: This research aimed to prepare tetragonal zirconia polycrystals powder by coprecipitation method and study effects of addition of different amounts of nano Al2O3 (1, 2 and 4) wt.% on its microstructure and mechanical properties of (5Y-TZP) composite. Design/methodology/approach: The powder was uniaxial pressed at a pressure of 150 MPa and held for 60 s, and sintered at the 1500°C, held for two hours and then cooling down at 5°C/min to room temperature. Microhardness and fracture toughness tests were utilized to evaluate the mechanical properties of yttria tetragonal zirconia polycrystal composite. The microstructure has been observed using field emission scanning electron microscopy(FESEM). Findings: The results showed an addition of nano Al2O3 has a great influence on hardness and microstructure, the increase in Vicker's microhardness of composite samples with the increase in the nano Al2O3 wt.% and microstructure were characterized with homogeneous zirconia distribution, grain growth destruction with the increasing percentage of nano Al2O3. The most important influence is the enhancing of the densification process as the porosity decreased. The highest hardness and maximum fracture toughness were recorded at 4 wt.% nano Al2O3. Research limitations/implications: Ceramic matrix composites are developed to overcome the brittleness of ZrO2 and the low toughness of alumina by formation, a large difference of elastic behavior between matrix and particles(dispersion phase )which disturbs the stress field as a dislocation comes near a particle. Practical implications: Zirconia has mechanical properties similar to those of stainless steel. Yttria-stabilized tetragonal Zirconia (Y-TZP) is growing used in dentistry due to its good mechanical properties such as hardness and fracture toughness. Thus, controlling of microstructure by adding nanoalumina plays an important role in enhancing these properties. Originality/value: Study the adding bitty percentage from nano alumina on microstructure and mechanical properties of (5Y-TZP) ceramic.
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-4 z 4

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies