Temat: Coating - Prolib Integro

Skocz do pozycji: 1.

Tytuł:: Wear Characteristics of FeW/FeW-B4C Coatings Produced by TIG Process
Autorzy:: Islak, S.
Tematy:: wear
coating
microstructure
TIG process; Pokaż więcej
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Powiązania:: https://bibliotekanauki.pl/articles/351663.pdf Link otwiera się w nowym oknie
Opis:: In this study, wear properties of FeW-B₄C coatings produced by tungsten inert gas (TIG) process on the AISI 1060 steel were investigated. TIG process was selected because it is a cost-effective approach for melting-based coatings. The treated surfaces were evaluated and characterized by means of scanning electron microscope (SEM), X-ray diffraction analysis, and electron dispersive spectrometry (EDS). The microhardness and wear experiment were also performed by using a microhardness machine and ball-on-disk tribometer. SEM observations showed that the obtained coating had a smooth and uniform surface. According to XRD analysis, borides and carbides phases formed in the coatings. The wear behavior of the coatings was compared with ball-on-disc configuration wear tests, at the same conditions. Average coefficient of friction values of the coatings were obtained at relatively low levels.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 2.

Tytuł:: Influence of repainting on the mechanical properties, surface topography and microstructure of polyester powder coatings
Autorzy:: Szala, M.
Kot, E. A.
Tematy:: electrostatic powder spraying
microstructure
polyester resin
organic coating
mechanical properties
repainting
roughness parameter
powder coating; Pokaż więcej
Wydawca:: Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Powiązania:: https://bibliotekanauki.pl/articles/102931.pdf Link otwiera się w nowym oknie
Opis:: The literature does not provide a systematic analysis of the effect of electrostatic powder coating repainting of structural and constructional aluminum elements on their technological parameters. It is industrial practice that worn or damaged coatings be repainted. It is crucial to determine the effect of electrostatic sprayed coatings repainting on their microstructure, roughness and mechanical properties. The aim of the work is to determinate the influence of repainting of powder deposited polyester coatings on their mechanical properties, roughness and microstructure. This study examined three different electrostatic spray epoxy coatings with matt, silk gloss and fine structure-matt finish. Test panels were prepared as single- and double-layer paint coatings on the aluminum alloy 6060 substrate. Hence, six test sets of coatings were deposited. Each set contained six samples. The microstructure of the cross section of coating was investigated by scanning electron microscopy (SEM) and light optical microscopy (metallographic and stereoscopy microscope). The chemical composition of coating was analyzed by the SEM-EDS method. The 2D surface roughness of single- and double-layer coatings and 3D surface topography maps were examined using a profile measurement gauge. The mechanical properties of coatings were measured by cupping, bending, impact, adhesion to substrate tests run according to standard procedures. As a result, the influence of repainting of polyester powder coatings on their properties was determined. The results demonstrate that repainting has no effect on the microstructure and coating adhesion to substrate as well as the bending test results and roughness of matt and silk gloss coatings. It has been found that repainting affects the results of impact and cupping tests as well as the roughness of samples with fine structure surface finish.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 3.

Tytuł:: Effect of boron on micro structure and microhardness properties of Mo-Si-B based coatings produced viatig process
Autorzy:: Islak, S.
Özorak, C.
Sezgin, C. T.
Akkaş, M.
Tematy:: Mo-Si-B coating
microstructure
microhardness
TIG; Pokaż więcej
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Powiązania:: https://bibliotekanauki.pl/articles/355695.pdf Link otwiera się w nowym oknie
Opis:: In this study, Mo-Si-B based coatings were produced using tungsten inert gas (TIG) process on the medium carbon steel because the physical, chemical, and mechanical properties of these alloys are particularly favourable for high-temperature structural applications. It is aimed to investigate of microstructure and microhardness properties of Mo-Si-B based coatings. Optical microscopy (OM), X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to characterize the microstructures of Mo-Si-B based coatings. The XRD results showed that microstructure of Mo-Si-B coating consists of α-Mo, α-Fe, Mo2B, Mo3Si and Mo5SiB2 phases. It was reported that the grains in the niicrostructure were finer with increasing amounts of boron which caused to occur phase precipitations in the grain boundary. Besides, the average microhardness of coatings changed between 735 HV0.3 and 1140 HV0.3 depending on boron content.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 4.

Tytuł:: Effect of Ultraviolet Absorber on Photo-Degradation of Epoxy Coating Studied by Slow Positron Beam
Autorzy:: Wang, Zheng
Liu, Fuwei
Li, Jingjing
He, Chunqing
Peng, Xiangyang
Huang, Zhen
Fang, Pengfei
Tematy:: epoxy coating
photo-degradation
ultraviolet absorber
slow positron beam
microstructure; Pokaż więcej
Wydawca:: Polska Akademia Nauk. Instytut Fizyki PAN
Powiązania:: https://bibliotekanauki.pl/articles/1033239.pdf Link otwiera się w nowym oknie
Opis:: The photo-degradation progress of epoxy coating and the effect of ultraviolet absorber under UV-B irradiation have been investigated in slow positron beam and by the Fourier transform infrared spectrometer. After 120 h of irradiation, the value of S parameter in sample bulk is reduced while compared with the virgin sample. The result is mostly due to post-cure process happening in this initial irradiation stage. As the irradiation time increases to 360 h, the S parameter decreases sharply. This is due to the growth of carbonyl group and the generation of free radical. After 528 h or longer time of irradiation, a very low S value was obtained near sample surface, indicating the formation of a dead surface layer. Positron results also reveal that the addition of ultraviolet absorber suppresses the development of the dead layer after long-term UV-B irradiation. Ultraviolet absorber has a suppressing effect on generation of polar groups towards sample bulk. The addition of ultraviolet absorber is a key factor that affects the photo-degradation of epoxy coating.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 5.

Tytuł:: Mikrostruktura, mikrotwardość i odporność na zużycie powłok typu "duplex" (Cr,Si)N/TiN na płytkach skrawających z WC
Microstructure, microhardness and wear resistance of "duplex" type (Cr,Si)N/TiN coatings deposited on WC cutting plates
Autorzy:: Morgiel, J.
Grzonka, J.
Mania, R.
Zimowski, S.
Dąbrowski, M.
Tematy:: azotek chromu
mikrostruktura
powłoka (Cr,Si)N
powłoka pseudo-duplex
rozpylanie magnetronowe
chromium nitride
microstructure
(Cr,Si)N coating
pseudo-duplex coating
magnetron sputtering; Pokaż więcej
Wydawca:: Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Powiązania:: https://bibliotekanauki.pl/articles/258138.pdf Link otwiera się w nowym oknie
Opis:: W pracy przedstawiono wyniki badań mikrostruktury i właściwości mechanicznych powłok typu "duplex" w układzie z wierzchnią (Cr,Si)N (~1 žm) i buforową warstwą TiN (~4 žm), osadzanych na płytkach z węglików spiekanych. Powłoka (Cr,Si)N była nanoszona przy użyciu magnetronu planarnego WMK-50 z wykorzystaniem targetów ze spieków CrSi (do 5% at. Si), a TiN metodą łukową na stanowisku PUSK-83. Obserwacje mikrostruktury wykazały, że powłoki (Cr,Si)N mają bardziej drobnokrystaliczną, kolumnową budowę od nanoszonych w takich samych warunkach powłok CrN. Badania właściwości mechanicznych pozwoliły stwierdzić, że mikrotwardość powłok (Cr,Si)N/TiN przy obciążeniu 20 i 10 mN mieści się w zakresie 24-29 GPa. Badania zużycia powłok w teście "ball on disc", tj. poprzez pomiar wytarcia powierzchni w niesmarowanym styku kula-płaszczyzna wykazały ich odporność zbliżoną do powłok CrN czy TiN. Natomiast badania eksploatacyjne powłok (Cr,Si)N/TiN na płytkach skrawających z WC prowadzone z chłodzeniem emulsją wykazały, że umożliwiają one prawie dwukrotny wzrost trwałości narzędzia w warunkach frezowania oraz czterokrotny w warunkach toczenia. Narzędzia z powłoką typu "duplex" (Cr,Si)N/TiN umożliwiają nawet toczenie materiału bez chłodzenia.
The microstructure and mechanical properties of duplex type (Cr,Si)N/TiN coatings on WC cutting plates were investigated. The hard (Cr,Si)N layer of ~1 žm thickness was deposited using WMK-50 planar magnetron equipped with CrSi (Si < 5 at.%) targets. The buffer TiN layer of 4 žm thickness was deposited using PUSK-83 Arc system. The transmission electron microscopy observations indicated, that all (Cr,Si)N coatings are characterised by columnar microstructure built of much finer crystallites than the CrN one. The microhardness of (Cr,Si)N/TiN estimated using 20-10 mN load showed some scatter within to 24-29 GPa range. The coatings wear resistance analysed with ball-on-disc test showed, that they are comparable with TiN and CrN ones. However, the test by work showed that the (Cr,Si)N/TiN duplex coated WC cutting plates cooled with emulsion show two times and four times longer lifetime in milling and turning processes, respectively, as compared with non-coated plates. The (Cr,Si)N/TiN duplex coated plates also allow dry cutting with reasonable tool lifetime.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 6.

Tytuł:: Influence of the Process Parameters on the Microstructure of a Hardfacing Coating Elaborated by Hot Isostatic Pressing
Autorzy:: Tellier, A.
Ardigo-Besnard, M. R.
Chateau-Cornu, J.-P.
Tematy:: powder metallurgy
hot isostatic pressing
high carbon steel
microstructure
hardfacing coating; Pokaż więcej
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Powiązania:: https://bibliotekanauki.pl/articles/355976.pdf Link otwiera się w nowym oknie
Opis:: Hot Isostatic Pressing elaboration of Norem02, an austenitic-ferritic hypereutectoid stainless steel, leads to the formation of an austenitic matrix with a mixture of acicular M₇ C₃ and globular M₂₃ C₆ carbides. The sintering tests, carried out by using an AISI 304L container, showed that the final microstructure and the carbides’ distribution of the HIPed Norem02 are strongly influenced by the process parameters (heating and cooling rate, sintering time, holding temperature and pressure) and by the particles’ size, microstructure and phase distribution of the initial powder. The morphological, crystallographic and chemical analysis of the sintered samples were completed by comprehension of the diffusion phenomena at the Norem02/304L interface, enabling the establishment of a correlation between elaboration process and final microstructure.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 7.

Tytuł:: Microstructural Characterization of Ni-Based B4C Reinforced Composite Coating Produced by Tungsten Inert Gas Method
Autorzy:: Kılıç, Musa
Tematy:: coating
NiCrBSi-B4C
Cr7C3
microstructure
microhardness; Pokaż więcej
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Powiązania:: https://bibliotekanauki.pl/articles/2049407.pdf Link otwiera się w nowym oknie
Opis:: In this study, NiCrBSi-B4C (wt. %5, %10 ve %15 B4C) powder mixtures are coated on the stainless steel surface of AISI304 by tungsten inert gas (TIG) method. We use optic microscope and scanning electron microscope (SEM) for the coating layer analysis, energy dispersive spectrometry (EDS) for element distribution analysis and X-ray diffractogram (XRD) for the analysis of phase components. The measurements of hardness are determined by the microhardness tester. Based on the results obtained by the examination of microstructure and phases, it has been observed that while B and C elemets are more intense in the middle and upper parts of the coating layer, the parts close to the interface have a higher intensity of Ni and Fe. Moreover, there are phases such as Cr7C3, γ – Ni, CrFeB, Ni3B, CrB ve Fe2B are formed in the coating layer. The increasing ratio of B4C results in increasing on the measurement values of microhardness. The maximum hardness value (430,8 HV0.2) is obtained from the coating layer of S4 sample while the minimum value (366,9 HV0.2) is observed from the NiCrBSi coated sample
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 8.

Tytuł:: Microstructure and Properties of Ni and Ni/Al2O3 Coatings Electrodeposited at Various Current Densities
Autorzy:: Góral, A.
Berent, K.
Nowak, M.
Kania, B.
Tematy:: Ni coating
Ni/Al2O3 composite coatings
microstructure
corrosion resistance; Pokaż więcej
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Powiązania:: https://bibliotekanauki.pl/articles/958217.pdf Link otwiera się w nowym oknie
Opis:: The study presents investigations of an influence of various direct current densities on microstructure, residual stresses, texture, microhardness and corrosion resistance of the nickel coatings electrodeposited from modified Watt’s baths. The properties of obtained coatings were compared to the nano-crystalline composite Ni/Al2O3 coatings prepared under the same plating conditions. The similarities and differences of the obtained coatings microstructures visible on both their surfaces and cross sections and determined properties were presented. The differences in the growth character of the Ni matrix and in the microstructural properties were observed. All electrodeposited Ni and Ni/Al2O3 coatings were compact and well adhering to the steel substrates. The thickness and the microhardness of the Ni and Ni/Al2O3 deposits increased significantly with the current density in the range 2 - 6 A/dm2. Residual stresses are tensile and they reduced as the current density increased. The composite coatings revealed better protection from the corrosion of steel substrate than pure nickel in solution 1 M NaCl.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 9.

Tytuł:: Właściwości tribologiczne powłok węglikowo-ceramicznych nanoszonych obróbką elektroiskrową
Tribological properties of the electro-spark deposited tungsten carbide-ceramic coatings
Autorzy:: Radek, N.
Bilska, I.
Antoszewski, K.
Pietraszek, J.
Tematy:: obróbka elektroiskrowa
powłoka
tribologia
mikrostruktura
przyczepność
electro-spark deposition
coating
tribology
microstructure
adhesion; Pokaż więcej
Wydawca:: Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Powiązania:: https://bibliotekanauki.pl/articles/971561.pdf Link otwiera się w nowym oknie
Opis:: W artykule przedstawiono wyniki badań właściwości powłok nanoszonych elektroiskrowo. Ocenę właściwości przeprowadzono na podstawie obserwacji mikrostruktury, pomiarów przyczepności oraz badań tribologicznych i aplikacyjnych. Badania przeprowadzono, wykorzystując elektrody WC-Co-Al2O3 oraz WC-Co-Al2O3/3TiO2, które zostały wytworzone poprzez spiekanie nanostrukturalnych proszków. Przeciwzużyciowe powłoki zostały naniesione elektroiskrowo na próbki ze stali C45 za pomocą urządzenia EIL-8A. Ze względu na swoje właściwości powłoki tego typu mogą być stosowane w ślizgowych węzłach tarcia oraz jako powłoki ochronne.
The process of material growth resulting from electroerosion is known as electro-spark alloying (ESA) or electro-spark deposition (ESD). The erosion of the anode and the spark discharges between the electrodes result in the formation of a surface layer with properties different from those of the base material. The processes of coating formation on metal parts, including electrospark deposition, involve mass and energy transport accompanied by chemical, electrochemical, and electrothermal reactions. Today, different electro-spark deposition techniques are used. They are suitable for coating formation and surface microgeometry formation. The paper is concerned with the performance properties of electrospark deposited coatings, which were determined using tribological and microstructural analysis, measuring the bonding strength and application tests. The studies were conducted using WC-Co-Al2O3 and WC-Co- Al2O3/3TiO2 electrodes produced by sintering nanostructural powders. The anti-wear coatings were electro-spark deposited over C45 carbon steel by means of an EIL-8A. These coatings are likely to be applied in sliding friction pairs and as protective coatings.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 10.

Tytuł:: Research into morphology and properties of TiO2 – NiAl atmospheric plasma sprayed coating
Autorzy:: Maruszczyk, A.
Dudek, A.
Szala, M.
Tematy:: microstructure
titania
TiO2–NiAl
atmospheric plasma spray
TiO2 coating
lamellae
microhardness
porosity; Pokaż więcej
Wydawca:: Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Powiązania:: https://bibliotekanauki.pl/articles/102426.pdf Link otwiera się w nowym oknie
Opis:: Titania (TiO2) based coatings are ceramic products with unique properties that make them widely applicable (e.g. in automotive industry, optoelectronics, chemical processing or medicine). Atmospheric plasma spray process enables to deposit TiO2 with addition of NiAl feedstock material which has an influence on coating cohesion and adhesion to substrate. However, the literature and technical notes give little information about parameters of spraying of TiO2-10 wt.% NiAl feedstock powders enables producing coating without nonuniformities including cracks and delamination form substrate. The aim of the work was to verify the parameters of plasma spraying by evaluation of the morphology and properties of manufactured the TiO2-10 wt.% NiAl coatings. Titania based coatings were deposited by means of atmospheric plasma sprayed on steel substrate using TiO2-10 wt.% NiAl feedstock powders. Morphology and microstructure were examined using light optical microscope (LOM) and scanning electron microscope (SEM). Coating chemical composition were analysed by means of SEM-EDS method. Coating surface topography and Knoop microhardness were determined. Porosity and thickness were evaluated by using quantities image analysis programme. Plasma spraying parameters used in our research allow to obtain uniform coating without cracks and delamination at coating-substrate interface. It acknowledges that uniformity of coating technological properties as well manufactured coatings can be put to wear tests, such as high temperature oxidation, corrosion, erosion or cavitation erosion resistance evaluation.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Informacja

Wyszukujesz frazę "Coating" wg kryterium: Temat