Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Jiang, W." wg kryterium: Autor


Tytuł:
Effects of cadmium stress on root tip cells and some physiological indexes in Allium cepa var. agrogarum L.
Autorzy:
Zou, J.
Yue, J.
Jiang, W.
Liu, D.
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Powiązania:
https://bibliotekanauki.pl/articles/19550.pdf  Link otwiera się w nowym oknie
Opis:
Allium cepa var. agrogarum L. seedlings grown in nutrient solution were subjected to increasing concentrations of Cd2+ (0, 1, 10, 100 μM). Variation in tolerance to cadmium toxicity was studied based on chromosome aberrations, nucleoli structure and reconstruction of root tip cells, Cd accumulation and mineral metabolism, lipid peroxidation, and changes in the antioxidative defense system (SOD, CAT, POD) in leaves and roots of the seedlings. Cd induced chromosome aberrations including C-mitoses, chromosome bridges, chromosome fragments and chromosome stickiness. Cd induced the production of some particles of argyrophilic proteins scattered in the nuclei and even extruded from the nucleoli into the cytoplasm after a high Cd concentration or prolonged Cd stress, and nucleolar reconstruction was inhibited. In Cd2+-treated Allium cepa var. agrogarum plants the metal was largely restricted to the roots; very little of it was transported to aerial parts. Adding Cd2+ to the nutrient solution affected mineral metabolism. For example, at 100 μM Cd it reduced the levels of Mn, Cu and Zn in roots, bulbs and leaves. Malondialdehyde content in roots and leaves increased with treatment time and increased concentration of Cd. Antioxidant enzymes appear to play a key role in resistance to Cd under stress conditions.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Estimation of system reliability by using the PLS-regression based corrected response surface method
Ocena niezawodności systemu z wykorzystaniem poprawionej metody powierzchni odpowiedzi opartej na regresji cząstkowych najmniejszych kwadratów
Autorzy:
Liu, H.
Jiang, W.
Hulio, Z. H.
Wang, Q.
Tematy:
reliability
mechanical system
partial least squares regression
response surface method
correction method
niezawodność
układ mechaniczny
regresja cząstkowych najmniejszych kwadratów
metoda powierzchni odpowiedzi
metoda korekcji
Pokaż więcej
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Powiązania:
https://bibliotekanauki.pl/articles/302091.pdf  Link otwiera się w nowym oknie
Opis:
A new computational method, referred as PLS-regression (PLSR) based corrected response surface method, has been developed for predicting the reliability of structural and mechanical systems subjecting to random loads, material properties, and geometry. The method involves a Corrected-Response Surface Model (C-RSM) based on the Partial Least Squares Regression Method (PLSRM) combined with some correction factors, and Monte Carlo Simulation (MCS), which is named as the Corrected-Partial Least Squares Regression-Response Surface Method (C-PLSRRSM). In order to develop an accurate surrogate model for the region determining the reliability of the system, a proper coefficient is presented to determine the sampling region of the input random variables. Due to a small number of original function evaluations, the proposed method is effective, particularly when a response evaluation entails costly finite-element, mesh-free, or other numerical analysis. Three numerical examples involving reliability problems of two structural systems and a mechanical system illustrate the method developed. Results indicate that the proposed method provides accurate and computationally efficient estimates of reliability. The proposed correction method, the PLSR based corrected response surface (C-PLSR-RS), can be the accurate surrogate model for calculating system reliabilities, especially for the implicit performance functions.
Nowa metoda obliczeniowa o nazwie "poprawiona metoda powierzchni odpowiedzi oparta na regresji PLS" (C-PLSRRSM) została opracowana dla potrzeb przewidywania niezawodności systemów konstrukcyjnych i mechanicznych poddanych obciążeniom losowym oraz charakteryzujących się losową geometrią oraz losowymi właściwościami materiałowymi. W metodzie uwzględniono pewne czynniki korekcyjne oraz symulację Monte Carlo. W celu opracowania odpowiedniego modelu zastępczego dla regionu stanowiącego o niezawodności systemu, przedstawiono współczynnik, który pozwala określić obszar pobierania próbek wejściowych zmiennych losowych. Ze względu na niewielką liczbę ocen funkcji początkowych, proponowana metoda jest skuteczna zwłaszcza wtedy, gdy ocena odpowiedzi wymaga kosztownej analizy numerycznej metodą elementów skończonych czy metodą automatycznie generowanej siatki (free mesh). Opracowaną metodę zilustrowano za pomocą trzech przykładów numerycznych dotyczących niezawodności dwóch systemów konstrukcyjnych oraz jednego układu mechanicznego. Wyniki wskazują, że proponowana metoda zapewnia dokładne i wydajne obliczeniowo oszacowanie niezawodności. Proponowana metoda C-PLSR-RS może stanowić trafny model zastępczy do obliczania niezawodności systemu, zwłaszcza w przypadku uwikłanych funkcji stanu granicznego.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Insensitive HMX (Octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine) Nanocrystals Fabricated by High-Yield, Low-Cost Mechanical Milling
Autorzy:
Wang, Y.
Jiang, W.
Song, X.
Deng, G.
Li, F.
Tematy:
nanoexplosives
HMX
thermal decomposition
sensitivity
Pokaż więcej
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Powiązania:
https://bibliotekanauki.pl/articles/358912.pdf  Link otwiera się w nowym oknie
Opis:
A mechanical approach had been adopted for fabricating HMX nanoparticles. This fabrication method avoided the recrystallization process and was different from the traditional methods employed to prepare nanoexplosives. In particular, the high yield and low cost increased the possibility of its industrial application. Specifcally, HMX particles, that had a mean size of 0.27 μm, were prepared by mechanical milling; a signifcant proportion of nano-HMX (<100 nm) were present and these were observed by TEM and SEM images. The thermal decomposition of HMX samples before and after pulverization was investigated by TG/DSC analysis. The results indicated that there was no obvious difference between the thermographs of raw and pulverized HMX. The HMX samples were investigated by friction, impact, and shock sensitivity tests. High safety was confrmed since pulverized HMX was far more insensitive than raw HMX; indeed the shock sensitivity of pulverized HMX was about 60 percent lower than that of raw HMX.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mechanical Spectroscopy of Equal-Channel Angular Pressed Fe-Cr Alloys and Tungsten
Spektroskopia mechaniczna stopów Fe-Cr i wolframu wyciskanych przez kanał kątowy
Autorzy:
Hao, T.
Tang, H.
Jiang, W.
Wang, X.
Fang, Q.
Tematy:
mechanical spectroscopy
internal friction technique
Fe-18wt.%Cr alloy and pure W
equal-channel angular
spektroskopia mechaniczna
technika tarcia wewnętrznego
stop Fe-18wt%Cr i czystego W
kanał kątowy
Pokaż więcej
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Powiązania:
https://bibliotekanauki.pl/articles/352822.pdf  Link otwiera się w nowym oknie
Opis:
nternal friction technique was used to investigate the microstructural stability of equal-channel angular pressed (ECAP) 9Cr1Mo steel (T91), Fe-18wt.%Cr alloy, and pure W. Several non-relaxation internal friction peaks are observed in three ECAP-strained specimens, which are related to the microstructural transition from a severely deformed state to a static recovery state of dislocations, and to recrystallized state. Along with the disappearance of the P1 peak, another relaxation internal friction peak P2 is observed during the second heating run only in Fe-18wt.%Cr alloy, and it does not disappear even during subsequent third heating run. This peak is not observed in T91 steel and W. The P2 peak is likely associated with a process of grain boundary (GB) sliding. Unlike T91, no abundant carbide precipitates distribute on GBs to pin GB and repulse GB sliding, thus, the P2 peak only occurs in Fe-18wt.%Cr alloy. It is concluded that high-temperature internal friction measurements are required to detect the grain boundary peak in pure W.
Technika tarcia wewnętrznego została użyta do zbadania stabilności mikrostruktury poddanych wyciskaniu przez kanał kątowy stali 9Cr1Mo (T91), stopu Fe-18wt%Cr, i czystego W. Zaobserwowano wiele nie-relaksacyjnych pików tarcia wewnętrznego w trzech próbkach odkształconych przez ECAP, które są związane z przejściem ze stanu silnie odkształconego do statycznego stanu zdrowienia dyslokacji, i do stanu zrekrystalizowanego. Wraz z zanikiem piku P1, tylko w przypadku stopu Fe-18wt%Cr obserwowany jest inny pik P2 relaksacji tarcia wewnętrznego podczas drugiego ogrzewania, i nie znika nawet w kolejnym trzecim etapie ogrzewania. Pik ten nie jest obserwowany w stali T91 i W. Pik P2 prawdopodobnie związany jest procesem poślizgu granicy ziaren. W przeciwieństwie do stali T91, brak bogatych w węglik wydzieleń na granicach ziaren, które by unieruchomiły granice i uniemożliwiły poślizg, stąd pik P2 występuje tylko w przypadku stopu Fe-18wt.%Cr. Stwierdzono, że pomiary tarcia wewnętrznego w wysokiej temperaturze są potrzebne, aby wykryć pik granicy ziarna w czystym W.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Electrostatic Hazards Assessment of Nitramine Explosives: Resistivity, Charge Accumulation and Discharge Sensitivity
Autorzy:
Peng, Q.
Cao, W.
Zhou, W.
He, Z.
Jiang, W.
Chen, W.
Tematy:
nitramine explosives
electrostatic hazards
resistivity
charging characteristics
electrostatic discharge sensitivity
Pokaż więcej
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Powiązania:
https://bibliotekanauki.pl/articles/358757.pdf  Link otwiera się w nowym oknie
Opis:
The electrostatic hazards of nitramine explosives (RDX, HMX) were assessed in this paper. The resistivities of different particle-size RDX and HMX were tested by a device designed and manufactured according to the standard ISO/IEC 80079-20-2:2016. This work shows that the resistivities of uncompacted RDX and HMX increase as the particle size decreases. Charging characteristics test experiments were also carried out using a so-called sieve method. Using this method, the influence of aperture size on charge accumulation of RDX was studied, and the characteristics of electrostatic accumulation of different particle-size RDX and HMX sieved with 50 mesh standard sieve were compared. The results show that the absolute value of the charge accumulation increases as the mesh number increases (i.e. the aperture size decreases), and increases as the particle size is decreased, indicating that nano-sized RDX and nano-sized HMX accumulate static electricity more easily than conventional micron-sized ones. Finally, the electrostatic discharge (ESD) sensitivity of nano-sized RDX and nano-sized HMX was investigated. Nano-sized nitramine explosives were found to have a higher ESD sensitivity than micron-sized ones.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Internal Friction of Single Crystals, Bicrystals and Polycrystals of Pure Magnesium
Tarcie wewnętrzne monokryształów, bikryształów i polikryształów czystego magnezu
Autorzy:
Jiang, W. B.
Kong, Q. P.
Magalas, L. B.
Fang, Q. F.
Tematy:
magnesium
single crystal
bicrystal
polycrystal
grain boundary
internal friction
magnez
monokryształ
bikryształy
polikryształ
granica ziarna
tarcie wewnętrzne
Pokaż więcej
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Powiązania:
https://bibliotekanauki.pl/articles/354563.pdf  Link otwiera się w nowym oknie
Opis:
The internal friction of magnesium single crystals, bicrystals and polycrystals has been studied between room temperature and 450°C. There is no internal friction peak in the single crystals, but a prominent relaxation peak appears at around 160°C in polycrystals. The activation energy of the peak is 1.0 eV, which is consistent with the grain boundary self-diffusion energy of Mg. Therefore, the peak in polycrystals can be attributed to grain boundary relaxation. For the three studied bicrystals, the grain boundary peak temperatures and activation energies are higher than that of polycrystals, while the peak heights are much lower. The difference between the internal friction peaks in bicrystals and polycrystals is possibly caused by the difference in the concentrations of segregated impurities in grain boundaries.
Badania tarcia wewnętrznego w monokryształach, bikryształach i polikryształach magnezu przeprowadzono w zakresie temperatur między temperaturą pokojową a 450°C. W monokryształach magnezu nie występuje pik tarcia wewnętrznego, ale wyraźny pik relaksacyjny pojawia się przy około 160°C w polikryształach. Energia aktywacji piku wynosi 1,0 eV, co jest zgodne z energią autodyfuzji Mg przez granice ziaren. Z tego względu pik tarcia wewnętrznego występujący w polikryształach można przypisać relaksacji granic ziaren. W przypadku trzech badanych bikryształów temperatury pików pochodzących od granic ziaren i ich energie aktywacji są wyższe niż w przypadku polikryształów, ale wysokości tych pików są znacznie niższe. Różnica między pikami tarcia wewnętrznego w bikryształach i polikryształach jest prawdopodobnie spowodowana przez różnicę stężeń zanieczyszczeń segregujących na granicach ziaren.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
In vitro cloning potential and phytochemical evaluations of aneuploid individuals produced from reciprocal crosses between diploid and triploid in Echinacea purpurea L.
Autorzy:
Li, Q.
Jiang, W.
Ren, Y.
Chen, R.
Li, X.
Yang, Y.
Wu, H.
Wydawca:
Polskie Towarzystwo Botaniczne
Powiązania:
https://bibliotekanauki.pl/articles/58769.pdf  Link otwiera się w nowym oknie
Opis:
Aneuploidy often presents large variations in morphology, physiology, biochemistry, and genetics owing to karyotypic imbalance. This study aimed to evaluate the efficacy of aneuploid breeding in Echinacea purpurea L, an important medicinal plant. Reciprocal crosses between diploid and triploid plants were performed to generate aneuploid plants. Cross with triploid as female parent resulted in increased production of aneuploid individuals (19 of 23; 82.61%), while using diploid as female parent yielded much higher percentage of diploid progenies (130 of 133; 97.74%). Each aneuploid had particular karyotypic characteristics compared to the parents. The proportions of median, submedian, and subterminal centromere location chromosomes in gross chromosomes among aneuploids and two parents showed large variations. Although aneuploids had relatively lower adventitious bud regeneration rates than their parents, almost half of them looked morphologically normal, with high survival rates when transplanted to ex vitro conditions. Among the bioactive compounds assessed, cichoric acid and chlorogenic acid contents were extremely encouraging. Most aneuploids had higher cichoric acid and chlorogenic acid contents than their parents. For example, A2 had the highest cichoric acid content of 21.98 mg/g dry weight, more than twice the values of diploid and triploid. Meanwhile, A21 had the highest chlorogenic acid content of 1.84 mg/g, approximately five times more than the parental values. Eleven superior aneuploid lines were successfully screened as breeding candidates. The present findings indicated E. purpurea is highly tolerant of karyotypic imbalance and aneuploid plants could serve as prospective breeding resources in E. purpurea.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of Crystal Lattice Deformation by Ion Channeling
Autorzy:
Jóźwik, P.
Sathish, N.
Nowicki, L.
Jagielski, J.
Turos, A.
Kovarik, L.
Arey, B.
Shutthanandan, S.
Jiang, W.
Dyczewski, J.
Barcz, A.
Tematy:
61.85.+p
68.55.Ln
02.70.Uu
68.37.Og
Pokaż więcej
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Powiązania:
https://bibliotekanauki.pl/articles/1400434.pdf  Link otwiera się w nowym oknie
Opis:
A model of dislocations has been developed for the use in Monte Carlo simulations of ion channeling spectra obtained for defected crystals. High resolution transmission electron microscopy micrographs show that the dominant type of defects in the majority of ion irradiated crystals are dislocations. The RBS/channeling spectrum is then composed of two components: one is due to direct scattering on randomly displaced atoms and the second one is related to beam defocussing on dislocations, which produce predominantly crystal lattice distortions, i.e. bent channels. In order to provide a correct analysis of backscattering spectra for the crystals containing dislocations we have modified the existing Monte Carlo simulation code "McChasy". A new version of the code has been developed by implementing dislocations on the basis of the Peierls-Nabarro model. Parameters of the model have been determined from the high resolution transmission electron microscopy data. The newly developed method has been used to study the Ar-ion bombarded $SrTiO_3$ samples. The best fit to the Rutherford backscattering/channeling spectra has been obtained by optimizing the linear combination of two kinds of defects: displaced atoms and bent channels. The great virtue of the Monte Carlo simulation is that unlike a traditional dechanneling analysis it allows quantitative analysis of crystals containing a mixture of different types of defects.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis and Optimization of Micro Speaker-Box Using a Passive Radiator in Portable Device
Autorzy:
Jiang, Y.-W.
Kwon, J.-H.
Kim, H.-K.
Hwang, S.-M.
Tematy:
passive radiator
speaker box
SPL improvement
Sound Pressure Level
Pokaż więcej
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Powiązania:
https://bibliotekanauki.pl/articles/176530.pdf  Link otwiera się w nowym oknie
Opis:
With the rapid development of multimedia devices such as smart phones and tablet PCs, microspeakers have been recently increasingly used for audio equipment. Improving the acoustic performance of a microspeaker is always a main concern, especially in the low frequency range. To avoid sound cancelation, a microspeaker unit is usually inserted into a speaker box. A passive radiator is also used in speaker boxes to improve the sound performance in the loudspeaker system. However, passive radiators have not been applied into microspeaker system. In this study, a speaker box with a passive radiator was analyzed and optimized to achieve a higher Sound Pressure Level (SPL) in a microspeaker system. The Finite Element Method (FEM), two-degree-of-freedom (DOF) vibration theory, and a plane circular piston sound source were used to study the electromagnetic, vibration, and acoustic characteristics, respectively. Optimization was conducted by changing the mass, stiffness, and size of the passive radiator. Based on the optimized parameters, a new sample was manufactured. The experiment results show that the SPL of the optimized speaker box with a passive radiator is improved by 5 dB at 200 Hz compared with the one without a radiator. The analysis results also matched the experiment results.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
MGF360-12L of ASFV-SY18 is an immune-evasion protein that inhibits host type I IFN, NF-κB, and JAK/STAT pathways
Autorzy:
Chen, Q.
Wang, X.X.
Jiang, S.W.
Gao, X.T.
Huang, S.Y.
Liang, Y.
Jia, H.
Zhu, H.F.
Tematy:
African swine fever virus
MGF360-12L
type I IFN
NF-κB
JAK/STAT
Pokaż więcej
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Powiązania:
https://bibliotekanauki.pl/articles/16647496.pdf  Link otwiera się w nowym oknie
Opis:
African swine fever virus (ASFV) causes feverous and hemorrhagic disease of domestic pigs and European wild boars with high mortality, yet no commercial vaccine is currently available. Several ASFV strains with natural deletion or gene-targeted knockout of multiple MGF360 and MGF505 genes are attenuated in vitro and in vivo, and can offer full protection against homologous challenge. However, the mechanisms underlying the protection are not fully understood. This study aims to investigate the effects of MGF360-12L of ASFV-SY18 on the cGAS-STING signaling pathway and explore the potential mechanisms. We identified that ASFV-SY18 MGF360-12L could inhibit cGAS-STING, TBK1, or IRF3-5D-stimulated IFN-β expression and ISRE activation. Specifically, MGF360-12L inhibits both the activation of PRD(III-I) in a dose-dependent manner, and suppresses the exogenous expression of TBK1 and IRF3-5D. MGF360-12L could block NF-κB activation induced by overexpression of cGAS-STING, TBK1, IKKβ. Downstream of the IFN-β signaling, MGF360-12L blocks the ISRE promoter activation by reducing total protein level of IRF9. Moreover, MGF360-12L protein can inhibit IFN-β-mediated antiviral effects. In conclusion, our findings suggest that MGF360-12L is a multifunctional immune-evasion protein that inhibits both the expression and effect of IFN-β, which could partially explain the attenuation of relevant gene-deleted ASFV strains, and shed light on the development of efficient ASFV live attenuated vaccines in the future.
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies