Autor: Li, B - Prolib Integro

Skocz do pozycji: 1.

Tytuł:: Finite element analysis of a superelastic shape memory alloy considering the effect of plasticity
Autorzy:: Jiang, X.
Li, B.
Tematy:: SMAs
superelasticity
plasticity
constitutive law
finite element analysis; Pokaż więcej
Wydawca:: Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Powiązania:: https://bibliotekanauki.pl/articles/281467.pdf Link otwiera się w nowym oknie
Opis:: In the present study, a shape memory alloy (SMA) phenomenological constitutive model is proposed that is capable of describing SMA superelastic behavior and the plasticity effect. The phase transformation constitutive model, by using strain and temperature as control variables to judge the phase transformation points in order to avoid the complexity of transformation correction, incorporates plasticity described by the von Mises isotropic hardening model. Further, the proposed model is implemented into the finite element package ANSYS by the user subroutine USERMAT. The results produced by the proposed model of simulated superelastic and plasticity behavior are compared with experimental data taken from the literature.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 2.

Tytuł:: Establishment of motion model for wave capture buoy and research on hydrodynamic performance of floating-type wave energy converter
Autorzy:: Gao, H.
Li, B.
Tematy:: wave energy
linear wave
floating-type
hydrodynamic
absorption efficiency; Pokaż więcej
Wydawca:: Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Powiązania:: https://bibliotekanauki.pl/articles/259950.pdf Link otwiera się w nowym oknie
Opis:: Floating-type wave energy converter has the advantages of high wave energy conversion efficiency, strong shock resistance ability in rough sea and stable output power. So it is regarded as a promising energy utilization facility. The research on hydrodynamic performance of wave capture buoys is the precondition and key to the wave energy device design and optimization. A simplified motion model of the buoys in the waves is established. Based on linear wave theory, the equations of motion of buoys are derived according to Newton’s second law. The factors of wave and buoys structural parameters on wave energy absorption efficiency are discussed in the China’s Bohai Sea with short wave period and small wave height. The results show that the main factor which affects the dynamic responses of wave capture buoys is the proximity of the natural frequency of buoys to the wave period. And the incoming wave power takes a backseat role to it at constant wave height. The buoys structural parameters such as length, radius and immersed depth, influence the wave energy absorption efficiency, which play significant factors in device design. The effectiveness of this model is validated by the sea tests with small-sized wave energy devices. The establishment methods of motion model and analysis results are expected to be helpful for designing and manufacturing of floating-type wave energy converter.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 3.

Tytuł:: Fiber diameter influence on optical transport of dielectric particles along subwavelength optical fibers
Autorzy:: Zhang, Y.
Lei, H.
Li, B.
Tematy:: optical transport
optical scattering force
optical gradient force
subwavelength optical fiber
evanescent field; Pokaż więcej
Wydawca:: Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Powiązania:: https://bibliotekanauki.pl/articles/173195.pdf Link otwiera się w nowym oknie
Opis:: We investigate a fiber diameter influence on optical transport of dielectric particles along subwavelength optical fibers using a near infrared laser of 1.55 μm wavelength. Theoretical analysis indicates that at 1.55 μm, the evanescent field at the fiber surface increases at first and then decreases with an increase of the fiber diameter from 600 nm to 1.6 μm, exhibiting a maximum at the fiber diameter of 950 nm. Based on three-dimensional finite-difference time-domain simulations, optical scattering forces acted on the dielectric particles and transport velocities of the particles were calculated for two fibers in the diameters of 930 nm and 1.5 μm. To support the theoretical analysis, experiments were performed using the two fibers to transport SiO2 particles (sizes of 530 nm and 1.5 μm) and TiO2 particles (size of 1.5 μm). The results show that with the same laser power launched into the two fibers, larger transport velocities can be obtained along the 930 nm diameter fiber.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 4.

Tytuł:: On-the-fly diagnosability analysis of bounded and unbounded labeled Petri nets using verifier nets
Autorzy:: Li, B.
Khlif-Bouassida, M.
Toguéyni, A.
Tematy:: fault diagnosis
discrete event system
labeled Petri nets
on-the-fly diagnosability analysis
verifier nets
diagnostyka błędu
układ zdarzeń dyskretnych
sieci Petriego; Pokaż więcej
Wydawca:: Uniwersytet Zielonogórski. Oficyna Wydawnicza
Powiązania:: https://bibliotekanauki.pl/articles/330272.pdf Link otwiera się w nowym oknie
Opis:: This paper considers the problem of diagnosability analysis of discrete event systems modeled by labeled Petri nets (LPNs). We assume that the LPN can be bounded or unbounded with no deadlock after firing any fault transition. Our approach is novel and presents the on-the-fly diagnosability analysis using verifier nets. For a given LPN model, the verifier net and its reachability graph (for a bounded LPN) or coverability graph (for an unbounded LPN) are built on-the-fly and in parallel for diagnosability analysis. As soon as a diagnosability decision is established, the construction is stopped. This approach achieves a compromise between computation limitations due to efficiency and combinatorial explosion and it is useful to implement an engineering approach to the diagnosability analysis of complex systems.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 5.

Tytuł:: Design of brake force distribution model for front-and-rear-motor-drive electric vehicle based on radial basis function
Autorzy:: Sun, B.
Zhang, T.
Gao, S.
Ge, W.
Li, B.
Tematy:: electric vehicle
motor drive
front-and-rear-motor-drive
brakes force
brake force distribution
pojazd elektryczny
napęd silnikowy
napęd silnikowy przedni i tylny
siła hamowania
rozkład siły hamowania; Pokaż więcej
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Powiązania:: https://bibliotekanauki.pl/articles/224023.pdf Link otwiera się w nowym oknie
Opis:: To achieve high-efficiency and stable brake of a front-and-rear-motor-drive electric vehicle (FRMDEV) with parallel cooperative braking system, a multi-objective optimal model for brake force distribution is created based on radial basis function (RBF). First of all, the key factors, which are the coefficient of brake force distribution between the front and rear shafts, the coefficient of brake force distribution at wheels, the coefficient of regenerative brake force distribution between front and rear axles, that influence the brake stability and energy recovery of the FRMDEV are analyzed, the fitness functions of brake stability and energy recovery are established. Secondly, the maximum allowed regenerative brake torque influenced by the state of charge of battery is confirmed, the correction model of the optimal distribution coefficient of regenerative brake force is created according to motor temperatures. Thirdly, based on HALTON sequence method, a two-factor database, vehicle velocity and brake strength, that characterizes vehicle operation is designed. Then an off-line response database of the optimal brake force distribution is established with the use of particle swarm optimization (PSO). Furthermore, based on hybrid RBF, the function model of the factor database and the response database is established, and the accuracy of the model is analyzed. Specially, the correlation coefficient is 0.995 and the predictive error variance is within the range between 0.000155 and 0.00018. The both indicate that the multi-objective distribution model has high accuracy. Finally, a hardware-in-loop test platform is designed to verify the multi-objective optimal brake force distribution model. Test results show that the real-time performance of the model can meet the demand of engineering application. Meanwhile, it can achieve both the brake stability and energy recovery. In comparison with the original brake force distribution model based on the rule algorithm, the optimized one proposed in this paper is able to improve the energy, recovered into battery, by 14.75%.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 6.

Tytuł:: Mild Method to Synthesize TATB by Amination of 1,3,5-Trialkoxy-2,4,6-Trinitrobenzene under Phase Transfer Catalysis Conditions
Autorzy:: Chang, T.
Li, B.
Chen, L.
Ge, L.
Lu, M.
Tematy:: TATB
phase transfer catalysis
atmospheric amination reaction; Pokaż więcej
Wydawca:: Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Powiązania:: https://bibliotekanauki.pl/articles/358103.pdf Link otwiera się w nowym oknie
Opis:: Nucleophilic amination, as a vital step in the synthesis of 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) using 1,3,5-trialkoxy-2,4,6-trinitrobenzene (TORTNB) and aqueous ammonia as the starting materials and catalyzed by phase transfer catalysis (PTCs) under mild conditions is described. Various phase transfer catalysts, such as crown ethers, tertiary amines, quaternary ammonium salts, poly ethers and cyclodextrin, and various experimental parameters, such as no. of equivalents of PTC, mole ratio of ammonium hydroxide to the starting material, reaction time, reaction temperature and cycle times of the organic phase were investigated. The crown ethers, especially 18-crown-6, show good catalytic activity and re-usability for the amination of 1,3,5-triethoxy-2,4,6-trinitrobenzene giving a yield of 96.52%. This makes for a safe process and suitable for scale-up, because the reactions are carried out under atmospheric conditions. The material synthesised by the new system was characterized by DSC, SEM and LPS.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 7.

Tytuł:: Calculating study of the turbine at last stage flow field in the small volume flow condition
Autorzy:: Jiang, T.
Jin, J.
Wang, Z.
Cao, L.
Li, B.
Tematy:: turbine
small volume flow
flow model
backflow; Pokaż więcej
Wydawca:: Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Powiązania:: https://bibliotekanauki.pl/articles/258680.pdf Link otwiera się w nowym oknie
Opis:: Based on basic equation and boundary layer theory of pneumodynamics, the thesis conducts numerical modeling and theoretical analysis on the last stage of turbine characteristics at a small volume flow by using FLUENT, gives an emphasized analysis on the position of first occurrence of backflow and its expansion direction and comes up with flow structure of the turbine flow field at last stage in the small volume flow condition. In connection with specific experiments, it puts forward the flow model of backflow occurring in the last stage field and the solution to the model. The flow field at last stage for a 100MW turbine in the small volume flow condition that is calculated by using the model is basically in conformity to the actual result.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 8.

Tytuł:: Extraction of rubidium and cesium from brine solutions using a room temperature ionic liquid system containing 18-crown-6
Autorzy:: Huang, D.
Zheng, H.
Liu, Z.
Bao, A.
Li, B.
Tematy:: Rubidium
Cesium
Ionic liquid
18-crown-6
Solvent extraction; Pokaż więcej
Wydawca:: Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Powiązania:: https://bibliotekanauki.pl/articles/779994.pdf Link otwiera się w nowym oknie
Opis:: Application of 1-butyl-3-metyhlimidazaolium hexafl uorophosphate ([C4mim][PF₆ ]), in the extraction of rubidium and cesium from brine solutions using 1,4,7,10,13,16-hexaoxacyclooctadecane (18C6) as extractant was investigated. Parameters that affect the extraction including pH of aqueous phase, equilibration time, dosage of the ionic liquid, phase ratio, concentration of 18C6 were studied. Under the optimal conditions, the single extraction effi ciency of rubidium ions and cesium ions were up 84.11% and 94.99%, respectively. The stripping of alkali metal ions from the loaded organic phase with different stripping agents and concentrations were also investigated. The initial value of the K/Cs and K/Rb ratios were 93.0 and 104.3, respectively, which have dropped 91.21% and 88.01%, respectively, after the extraction and stripping experiments. It was taken a big step in the separation and enrichment of cesium (rubidium) ion and potassium ion. The extraction mechanism was revealed most likely to be a cation exchange mode in this system.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 9.

Tytuł:: Model of line-of-sight ultraviolet propagation
Autorzy:: Li, B.
Wang, Hongbo
Mao, Z.
Dong, Z.
Zhang, X.
Tematy:: ultraviolet communication
bipyramid model
scattering characteristic
line-of-sight (LOS) communication mode; Pokaż więcej
Wydawca:: Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Powiązania:: https://bibliotekanauki.pl/articles/174219.pdf Link otwiera się w nowym oknie
Opis:: The traditional line-of-sight ultraviolet model cannot serve better for link performance study for the reason that the scattering characteristic is often ignored in the modelling process. Therefore, a line-of-sight ultraviolet bipyramid model in combination with transceiver full beam angles and geometrical relationship of the transceiver field of view intersection is established. The theoretical rationality of the bipyramid model in comparison with a traditional line-of-sight model is demonstrated by the classically analytical model for line-of-sight scenario. Based on a bit error rate requirement of voice communication, the effects of transmitting power versus range for three line-of-sight ultraviolet communication modes are further analyzed.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 10.

Tytuł:: Real-time Segmentation of Yarn Images Based on an FCM Algorithm and Intensity Gradient Analysis
Segmentacja obrazu przędzy oparta na algorytmie FCM i analizie gradientu intensywności
Autorzy:: Li, Z.
Pan, R.
Wang, J.
Wang, Z.
Li, B.
Gao, W.
Tematy:: real-time segmentation
image processing
yarn evenness
FCM algorithm
gradient analysis
segmentacja w czasie rzeczywistym
przetwarzanie obrazu
algorytm FCM
analiza gradientu; Pokaż więcej
Wydawca:: Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Powiązania:: https://bibliotekanauki.pl/articles/233569.pdf Link otwiera się w nowym oknie
Opis:: This paper presents a new method for real-time segmentation of yarn images which are captured by a real-time image acquisition device. The first frame of the images is clustered by the local average intensity and entropy of the image based on the FCM (Fuzzy C-means) algorithm to obtain a segmentation threshold value. The pixels with an intensity below the threshold value in each column of the image are convolved with a convolve template to construct an intensity gradient curve. The points of maximum value and minimum value in the curve are considered as the upper and lower edge points of yarn. A robust real-time segmentation algorithm of yarn images is obtained for evaluating yarn diameter more precisely. Finally two indices of SE (Segmentation Error) in % and ADE (Average Diameter Error) in % are proposed to evaluate the segmentation method, which is then compared with the manual method.
Artykuł dotyczy oceny przeprowadzonej w czasie rzeczywistym segmentacji obrazów w oparciu o rozmyty algorytm C-średnich i analizę intensywności gradientu. Zaproponowano metodę segmentacji obrazów przędzy mającą na celu zwiększenie dokładności pomiarów jej średnicy, a w zamierzeniach wpłynięcie na zwiększenie dokładności oceny jej nierównomierności. W tym celu zaprojektowano stanowisko badawcze, umożliwiające rejestrację obrazów przędzy wykonaną w czasie rzeczywistym, z bardzo dużą częstotliwością rejestracji kadrów zdjęć. Na tej podstawie przeprowadzono obliczenia obejmujące między innymi minimalizację rozmytej funkcji celu, lokalną charakterystykę intensywności obrazu, a także jednowymiarowy splot wykorzystane do wykrywania krawędzi rozpatrywanej przędzy. Uzyskane rezultaty proponowanej metody skonfrontowano z rezultatami przewidywanymi za pośrednictwem tradycyjnych metod. W szczególności w celach porównawczych uwzględniono progowanie Otsu i grupowanie za pośrednictwem algorytmu FCM, a także Region Growing Algorithm.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Informacja

Wyszukujesz frazę "Li, B" wg kryterium: Autor