Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Lu, F." wg kryterium: Autor


Tytuł:
Investigation of the cook-off processes of HMX-based mixed explosives
Autorzy:
Chen, L.
Ma, X.
Lu, F.
Wu, J.
Tematy:
explosives
chemical kinetics
thermal decomposition
cook-off
numerical simulation
Pokaż więcej
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Powiązania:
https://bibliotekanauki.pl/articles/358000.pdf  Link otwiera się w nowym oknie
Opis:
In order to investigate the characteristics of the thermal reaction for two kinds of mixed explosives, PBXC-10 (HMX/TATB/Binder, 38/57/5) and JO-8 (HMX/Binder, 95/5), multi-point measured temperature cook-off tests were carried out at different heating rates. The thermal transfer and finite chemical reactions that include the β→δ transition of HMX, and the endothermic and exothermic cook-off processes were analyzed. A 3D model of the explosive cook-off test was developed to simulate the thermal and chemical behaviour in a thermal ignition. The decomposition mechanisms for HMX and TATB are described by the multistep, chemical kinetic model. The thermal properties, decomposition pathways, and chemical kinetic reaction rate constants for each component are used to develop the reaction courses at various weight percentages. The thermal decomposition reaction of a multi-component, mixed explosive can be predicted as long as the chemical kinetics model of each single-base explosive and binder are known. The phase transition of HMX has an influence on the temperature of the explosive, especially for an explosive with a high HMX content. For mixed explosives containing HMX and TATB, most of the heat release is produced by the decomposition of HMX before ignition, but TATB can delay the ignition time and decrease the reaction violence in the cook-off process.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The THESEUS space mission concept : science case, design and expected performances
Autorzy:
Callanan, P.
Atteia, J.-L.
Rauw, G.
Lebrun, V.
Finelli, F.
Zhang, B. B.
D'Avanzo, P.
Sabau-Graziati, L.
Rodic, T.
Capozziello, S.
Topinka, M.
Kaneko, Y.
Korpela, S.
Szécsi, D.
Omodei, N.
Piro, L.
Bulgarelli, A.
Castro-Tirado, A. J.
Petrosian, V.
Dainotti, Maria
Colpi, M.
Bagoly, Z.
Della Valle, M.
Masetti, N.
Kumar, P.
Piedipalumbo, E.
Rachevski, A.
Giommi, P.
Mereghetti, S.
O'Brien, P.
Grado, A.
Fynbo, J.
Pareschi, G.
Maiorano, E.
Mignani, R.
Campana, S.
Capitanio, F.
Dong, Y.-W.
Ruffini, R.
Jonker, P.
van Putten, M.
Ghirlanda, G.
Camp, J.
Rhoads, J.
Götz, D.
Soomin, J.
Hanlon, L.
Zampa, G.
Kiss, L.
Páta, P.
Willingale, R.
Casella, P.
MacFadyen, A.
Li, T.
Paizis, A.
Sims, M.
Amati, L.
Antonelli, A.
Orleanski, P.
Paltani, S.
Boulade, O.
Gandhi, P.
Skidmore, W.
Fiorini, M.
De Pasquale, M.
Israel, G.
Covino, S.
Attina, P.
Savaglio, S.
Cuby, J.-G.
Bellutti, P.
Romano, P.
Song, L.
Ciardi, B.
Morris, D.
Caruana, J.
Frontera, F.
Ryde, F.
Campana, R.
Bozzo, E.
Santangelo, A.
Martin-Carrillo, A.
Wilson-Hodge, C.
Valenziano, L.
Longo, F.
Campolongo, E.
Ghisellini, G.
Izzo, L.
Cordier, B.
Vojtech, S.
Brandt, S.
Salvaterra, R.
Vergani, S.
Ciolfi, R.
Balazs, L.
Renotte, E.
Tenzer, C.
Boci, S.
Gal-Yam, A.
Auricchio, N.
Budtz-Jorgensen, C.
Mundell, C.
Chen, Y.
Cenko, B.
Butler, C.
Guiriec, S.
Sguera, V.
Yonetoku, D.
Orlandini, M.
Pian, E.
Celotti, A.
Kawai, N.
Briggs, M.
Marisaldi, M.
Argan, A.
Wiersema, K.
Malcovati, P.
Hutchinson, I.
Vacchi, A.
Lavagna, M.
Bianco, F.
Modjaz, M.
Gendre, B.
Stanway, E.
Rezzolla, L.
Burderi, L.
Basa, S.
Zhang, S.-N.
Labanti, C.
Shigehiro, N.
Harms, J.
Gomboc, A.
Basak, R.
Hernanz, M.
Hudec, R.
Guidorzi, C.
Watson, D.
Bernardini, M. G.
Melandri, A.
Drago, A.
Hornstrup, A.
Pe'er, A.
Starling, R.
Geza, E.
Osborne, J. P.
Boer, M.
Brocato, E.
Botticella, M. T.
Penacchioni, A. V.
Vanzella, E.
Morelli, B.
Maio, U.
Hafizi, M.
Tagliaferri, G.
Piranomonte, S.
Ferrara, A.
Rossi, A.
Nicastro, L.
De Luca, A.
Piran, T.
Palazzi, E.
Vinciguerra, S.
Baldazzi, G.
Lu, F.
Maraschi, L.
Del Monte, E.
Nargaard-Nielsen, H. U.
McBreen, S.
Le Floch, E.
Morgante, G.
Fuschino, F.
Malesani, D.
Lyutikov, M.
Malaguti, G.
Adami, C.
Colafrancesco, S.
Panessa, F.
Read, A.
Contini, C.
Troja, E.
Comastri, A.
Evangelista, Y.
Vercellone, S.
Razzano, M.
Chardonnet, P.
Rosati, P.
Vianello, G.
D'Elia, V.
Feroci, M.
Ettori, S.
Dadina, M.
Reglero, V.
Connaughton, V.
Bertuccio, G.
Schady, P.
Zhang, B.
Zhang, S.
Branchesi, M.
Stratta, G.
Blain, A.
De Martino, D.
Hjorth, J.
Urata, Y.
Margutti, R.
Uslenghi, M.
Tanvir, N.
Greiner, J.
Zicha, J.
Zampa, N.
Kuvvetli, I.
Braga, J.
Dostawca treści:
Repozytorium Uniwersytetu Jagiellońskiego
Artykuł
Tytuł:
The golf-ball model and the purpose of drumlin formation
Autorzy:
Smalley, Ian J.
Lu, Ping
Jefferson, Ian F.
Tematy:
Drumlin formation
sub-glacial deforming layer
golf-ball model
self-organisation
sand heap analogy
Turinginstability
Pokaż więcej
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Powiązania:
https://bibliotekanauki.pl/articles/2026748.pdf  Link otwiera się w nowym oknie
Opis:
The purpose of drumlin formation is to facilitate glacier flow. Drumlins form in a deforming layer between ice and s q ground, they produce a pimpled ground surface which causes less drag in the flowing system, after the fashion of the Prandtl effect which reduces boundary layer detachment (as in the flying golf ball). This pimpled surface has selforganising properties and this causes the development of a low drag situation. The drumlin field is the critical phenomenon; the formation of individual drumlins is a small part of the overall effect.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Strength and Fracture Analysis of Single-Lap Self-Pierce Riveted Joints
Autorzy:
He, X.
Lu, Y.
Liu, F.
Xing, B.
Zeng, K.
Tematy:
46.70.-p
Pokaż więcej
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Powiązania:
https://bibliotekanauki.pl/articles/1192386.pdf  Link otwiera się w nowym oknie
Opis:
Due to the increased use of lightweight sheet materials, there has been a significant increase in the use of self-pierce riveting. This paper deals with the strength and fracture mechanism of single-lap self-pierce riveted joints. The online window technique was introduced in the single-lap self-pierce riveting processes for evaluating the quality of joints. Signals obtained from sensors were amplified and transferred to the data acquisition system which measures, processes and saves the signals. Monotonic tensile tests were carried out to measure the ultimate tensile strengths for the single-lap self-pierce riveted joints. For investigating the fracture mechanism of the single-lap self-pierce riveted joints, the electrolytic polishing and anode film coating were used for dealing with the cross-section. The differential interference contrast method was used for observing the micro-structure of the cross-section of the joints. The distribution of the hardness in the cross-section of the single-lap self-pierce riveted joints was also studied. The normal hypothesis tests were performed to examine the rationality of the test data.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of oxidation on the wetting of coal surfaces by water: experimental and molecular dynamics simulation studies
Autorzy:
Li, E.
Lu, Y.
Cheng, F.
Wang, X.
Miller, J. D.
Tematy:
wettability
oxidation
molecular dynamics simulation
hydrogen bonding
contact angles
coal surfaces
Pokaż więcej
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Powiązania:
https://bibliotekanauki.pl/articles/109792.pdf  Link otwiera się w nowym oknie
Opis:
The wettability of coal surfaces by water continues to be one of the key factors which determines the success of coal flotation. Consequently, oxidation of coal surfaces is a fundamental issue of interest. In this work, the effect of oxidation on the wetting of coal surfaces and the interaction between water molecules and oxygen-containing sites at the coal surface was investigated based on advancing/receding contact angle measurements and molecular dynamics simulations. For the simulation studies, a flat coal surface was constructed with the assistance of the molecular repulsion between graphite surfaces and the assembly of Wiser coal molecules. Our results indicated that the simulated advancing and receding contact angles were very similar, and both of them decreased, as expected, with an increase of hydroxyl sites at the coal surface. The good agreement between the simulated advancing/receding contact angles and the experimental receding contact angle values suggested that the configuration of the systems and the set of parameters for the simulation were appropriate. The spreading of water is mainly due to the hydrogen bonds formed between the interfacial water molecules and the hydroxyl sites at the coal surface. The hydroxyl groups show stronger hydration capacity than other oxygen-containing groups according to the calculated hydrogen bonds and interaction energies.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Luminescence of hydrothermally fabricated PbF2:Er3+ particles and their application in bifacial silicon solar cells
Autorzy:
Yang, F
Wu, C.
Hao, X
Chen, Y.
Lu, J.
Yang, Sh.
Tematy:
PbF2
Er3+ particles
hydrothermal method
upconversion
Pokaż więcej
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Powiązania:
https://bibliotekanauki.pl/articles/174503.pdf  Link otwiera się w nowym oknie
Opis:
We report the synthesis of PbF2:Er3+ particles using a hydrothermal method. The structure and upconversion emission properties of the products are investigated by scanning electron microscopy, X-ray diffractometer, Raman spectrophotometer and fluorescence spectrometry. An increase in Er3+ concentration in the crystals changes the PbF2 structure from a mixed phase to a cubic phase and decreases the grain size to nanoscale levels. Enhanced upconversion efficiency is achieved after annealing resulted from the formation of the cubic phase and the increase of grain size. The optimal Er3+ concentration is found to be 4% after annealing, and applied to the back of a bifacial silicon solar cell, maximum external quantum efficiencies of 0.38% and 0.79% are respectively obtained under 0.77 W/cm2 laser excitation (1560 nm) and AM1.5 + laser co-excitation.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Two-terminal reliability analysis for multi-phase communication networks
Analiza niezawodności par terminali w wielofazowych sieciach komunikacyjnych
Autorzy:
Lu, J.-M.
Innal, F.
Wu, X.-Y.
Liu, Y.
Lundteigen, M. A.
Tematy:
binary decision diagram
component-behavior model
multi-phase network systems
system reliability
binarny schemat decyzji
model zachowania komponentów
systemów sieciowych wielofazowe
niezawodność systemu
Pokaż więcej
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Powiązania:
https://bibliotekanauki.pl/articles/301295.pdf  Link otwiera się w nowym oknie
Opis:
Most researches of network reliability generally assume that the system structures do not change with time. This paper presents the concept of multi-phase network systems (MPNS) to consider dynamic characteristics of networks, and analyze the reliability of MPNS. MPNS reliability is evaluated through a cross-phase binary decision diagram (BDD). The BDD-based algorithm can act as a platform to consider various components behaviors such as repair and growing pressure. Case study shows that the proposed MPNS concept is an effective description of some practical communication networks, and the cross-phase BDD model is efficient in analyzing MPNS reliability.
Większość badań niezawodności sieci ogólnie przyjąć, że struktury systemu nie zmieniają się w czasie. W artykule przedstawiono koncepcję systemów sieciowych wielofazowych (MPNS) rozpatrywanie dynamicznych właściwości sieci i analizy niezawodności MPNS. MPNS niezawodność jest oceniany przez cross-fazowego schematu decyzyjnego binarny (BDD). Algorytm z siedzibą w BDD może działać jako platforma do rozważenia różnych komponentów zachowań, takich jak naprawy i rosnącej presji. Studium przypadku pokazuje, że proponowana koncepcja MPNS jest skutecznym opis niektórych praktycznych sieci komunikacyjnych, a cross-fazowego modelu BDD jest skuteczny w analizie MPNS niezawodność.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Improving spodumene flotation using a mixed cationic and anionic collector
Autorzy:
Wang, Y.
Zhu, G.
Yu, F.
Lu, D.
Wang, L.
Zhao, Y.
Zheng, H.
Tematy:
spodumene
lithium
silicates
flotation
anionic surfactant
cationic surfactant
Pokaż więcej
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Powiązania:
https://bibliotekanauki.pl/articles/109883.pdf  Link otwiera się w nowym oknie
Opis:
Lithium, a rare-earth element, has been in increasing demand. Spodumene flotation is an important and challenging step for lithium extraction and production from lithium ore. In the present work, flotation tests for three pure minerals (i.e., spodumene, quartz and feldspar) and a real spodumene ore were carried out at laboratory scale. The results showed that YOA, a mixture of oleic acid and dodecylamine with the molar ration of 10:1, could be used as collector to produce a spodumene concentrate with grade of 5.59% Li2O from the feed ore with grade of 1.48% Li2O where 85.24% of Li2O was recovered to the concentrate. The measured zeta potential, contact angle and adsorption capacity indicated that YOA was preferentially adsorbed on spodumene instead of on quartz or feldspar, with the spodumene surface being more hydrophobic than that of feldspar or quartz. The adsorption energies of YOA on spodumene were calculated and the results provided insights into the superior flotation performance obtained in the present work.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigation on Stripping-down TNT from Waste Munitions by Supercritical CO2 Fluid Extraction under Low Temperature Conditions
Autorzy:
Yang, T.-M.
Li, J.-S.
Su, C.-S.
Lu, K.-T.
Yeh, T.-F.
Tematy:
treatment of waste munitions
supercritical fluid extraction technique
TNT
stripping-down
low temperature conditions
Pokaż więcej
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Powiązania:
https://bibliotekanauki.pl/articles/358681.pdf  Link otwiera się w nowym oknie
Opis:
The traditional methods of waste munitions treatment are expensive and also have potential risks during the treatment process. The supercritical fluid extraction technique has been a rapidly developing technique in the chemical industry in recent years. CO2 is used as the solvent, which has some advantages, such as low pollution, low cost, good chemical stability and can be operated under low temperature conditions. This research explored the feasibility of reclaiming TNT from waste munitions by supercritical CO2 fluid extraction. It was found interestingly that the melting point of TNT can be lowered in supercritical CO2 fluid. Therefore, the melting process of TNT was observed under different temperature and pressure conditions to determine the best operating conditions for stripping-down TNT from waste munitions. Afterwards, simulated warheads with weight loadings of 60 g, 500 g and 1 kg of TNT were prepared and stripping-down tests from the simulated warheads were carried out using supercritical CO2 fluid at temperatures lower than the normal melting point of TNT. The results showed that TNT could be completely removed from the simulated warheads and the optimum operating conditions were determined as 55 °C and 25 MPa. This study will contribute to the feasibility evaluation of stripping-down TNT-based high explosives.
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies