Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Matsuda, S." wg kryterium: Autor


Tytuł:
The assessment of "Jatropha" as raw material for BDF
Autorzy:
Matsuda, S.
Rudyanto, B.
Kojima, M.
Herdiana, W.
Fujiwara, E.
Tematy:
bio-fuel
Jatropha
feasibility study
field survey
labor costs
Pokaż więcej
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów
Powiązania:
https://bibliotekanauki.pl/articles/384316.pdf  Link otwiera się w nowym oknie
Opis:
Prevention of global warming is becoming urgent issue and "biofuel" gathering worldwide attention has been put into practical use not only in US, EU, Brazil or other countries but in Japan. As for its impact on environment, however, evaluation still varies including aninfluence on global economy, for example food price crisis that might have been caused by competition with food. In the previous study [1], one of the authors pointed out that "bio-ethanol" from crops is never "carbon neutra", that means the production and use of the fuel does not lead to a net increase in atmospheric CO concentration, nor useful as a countermeasure against global warming. The "second-generatio" of bio-fuel made from nonfood biomass has attracted much attention especially after the Hokkaido Toyako G8 summit held in November 2008. Among various plants or biomass materials, "Jatropha" has come to the front as one of the most promising candidates for future bio-diesel production. In fact, there are many plans or projects aiming at large scale cultivating Jatropha for bio-diesel oil production in several African or Southeast-Asian countries. However, it should be pointed out that there are too many unknown factors still remaining that are important in practical use of Jatropha oil, for example, productivity as well as sustainability, long-term impact of its large-scale use on soil quality, practical costs of the oil and so on. In this study, an assessment on the validity of Jatropha production was tried as quantitatively as possible using the data obtained from a field survey in Indonesia conducted by the authors in January and March of 2009. Although LCI data for LCA calculations obtained was very limited, the true reality of the situation about Jatropha could substantially be demonstrated to some extent. The main point was that the oil cost was dominated mainly by labor costs, because many work operations could not be mechanized and inevitably be manual handling tasks. In many cases, the labor costs could not be covered by the income from the Jatropha oil (or seed) due to the low productivity of the biomass, whereas the prime cost of the biodiesel oil was rather high expensive compared with fossil fuel.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microstructure of Small Amount of TM Added Al-Mg-Si Alloys with Two-Step Ageing
Autorzy:
Kuroda, Y.
Yoshino, D.
Lee, S.
Ikeno, S.
Matsuda, K.
Tematy:
81.40.Cd
68.37.Lp
Pokaż więcej
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Powiązania:
https://bibliotekanauki.pl/articles/1032888.pdf  Link otwiera się w nowym oknie
Opis:
Traditionally, Al-Mg-Si alloys are strengthened by dispersed small particles and they have medium strength with good formability. It is well known that alloying elements on Al-Mg-Si alloys (e.g. Cu) can improve mechanical properties because Cu can alter precipitation sequence. In this research, we investigated the effect of transition metals (TM) on Al-1.06at.%MgSi-TM alloys through single- and two-step ageing. Mechanical property and microstructure observation were conducted by micro Vickers hardness measurement and transmission electron microscopy.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Tem Observation Of Precipitate Structures In Al-Zn-Mg Alloys With Additions Of Cu/Ag
Obserwacje wydzieleń w stopach Al-Zn-Mg modyfikowanych Cu/Ag metodą mikroskopii TEM
Autorzy:
Watanabe, K.
Matsuda, K.
Ikeno, S.
Yoshida, T.
Murakami, S.
Tematy:
Al-Zn-Mg alloy
aging
precipitates
TEM
Cu and Ag addition
stop Al-Zn-Mg
starzenie
wydzielenia
dodatek Cu i Ag
Pokaż więcej
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Powiązania:
https://bibliotekanauki.pl/articles/354951.pdf  Link otwiera się w nowym oknie
Opis:
Al-Zn-Mg alloy has been known as one of the aluminum alloys with the good age-hardening ability and the high strength among commercial aluminum alloys. The mechanical property of the limited ductility, however, is required to further improvement. In this work, three alloys, which were added Cu or Ag into the Al-Zn-Mg alloy, were prepared to compare the effect of the additional elements on the aging behavior. The content of Ag and Cu were 0.2at.% and the same as, respectively. Ag or Cu added alloy showed higher maximum hardness than base alloy. The particle shape and rod shape precipitates were observed in all alloys peak-aged at 423K. According to addition of Ag or Cu, the number density of the precipitates increased higher than that of base alloy.
Al-Zn-Mg jest stopem, który można efektywnie poddawać procesowi utwardzania wydzieleniowego. Spośród różnorodnych stopów aluminium charakteryzuje się bardzo wysoką wytrzymałością mechaniczną, jednak jego ograniczona plastyczność jest cechą wymagającą poprawy. W toku prac przygotowano trzy stopy: stop bazowy Al-Zn-Mg oraz stopy zawierające dodatki Cu lub Ag, dla porównania wpływu tych dodatków na starzenie się materiału. Zawartość Ag i Cu wynosiła odpowiednio 0,2% at. Stopy z dodatkiem Ag lub Cu wykazywały większą twardość maksymalną w porównaniu ze stopem bazowym. We wszystkich stopach starzonych w temperaturze 423K obserwowano charakterystyczne wydzielenia, a ich koncentracja była odpowiednio większa dla stopów z dodatkiem Ag lub Cu.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microstructure of V3Ga superconducting wire using high Ga content Ti-Ga/V precursor composite material
Mikrostruktura nadprzewodzącego drutu V3Ga wytworzonego przy użyciu związku TiGa3 o wysokiej zawartości Ga
Autorzy:
Murakami, S.
Matsuda, K.
Kawabata, T.
Hishinuma, Y
Ikeno, S.
Tematy:
superconductor
Ti-Ga/V precursor composite material
V-Ga phase
TEM
microstructure
drut nadprzewodzący
Ti-Ga/V materiał kompozytowy
faza V-Ga
mikrostruktura
Pokaż więcej
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Powiązania:
https://bibliotekanauki.pl/articles/355932.pdf  Link otwiera się w nowym oknie
Opis:
Our co-workers, Hishinuma et. al. have fabricated the V3Ga compound wire by a new process using a high Ga content Ti-Ga compound in order to improve the superconducting property of the wire. In this study, we investigated microstructures of this wire to clarify the existence of V3Ga phase. The different contrasts of the matrix, two V-Ga phases and Ti-Ga core were observed by SEM observation. Two V-Ga phases were also confirmed. The ratio of V to Ga for two V-Ga phases was respectively 3:1 and 6:5 according to the EDS result. And these two phases were confirmed as V3Ga and V6Ga5.
Hishinuma i współpracownicy wytworzyli drut związku międzymetalicznego V3Ga przy użyciu nowej metody wykorzystującej związek międzymetaliczny Ti-Ga o wysokiej zawartości Ga celem poprawy właściwości nadprzewodzących drutu. Zbadaliśmy mikrostrukturę drutu, aby zweryfikować obecność fazy V3Ga. W trakcie badań SEM zaobserwowano zróżnicowany kontrast w osnowie oraz istnienie dwóch faz V-Ga i rdzenia T-Ga. Analiza EDS potwierdziła istnienie dwóch faz z układu V-Ga, w których stosunek V do Ga wynosi odpowiednio 3:1 i 6:5. Potwierdzono, ze te dwie fazy to V3Ga i V6Ga5.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
TEM Observation of Cu and Ag Added Al-Mg-Si Alloy
Autorzy:
Matsumoto, A.
Nejigaki, T.
Lee, S.
Ikeno, S.
Matsuda, K.
Tematy:
81.40.Cd
68.37.Lp
Pokaż więcej
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Powiązania:
https://bibliotekanauki.pl/articles/1032894.pdf  Link otwiera się w nowym oknie
Opis:
It is well known that Cu and Ag addition on Al-Mg₂Si alloy can enhance its mechanical properties due to solid solution hardening. Several reports are available about the effect of each alloying elements, Cu and Ag, on Al-Mg-Si alloys. In this research, Al-Mg-Si-Cu-Ag alloys have chemical compositions of (1) 0.18Cu-0.18Ag and (2) 0.35Cu-0.35Ag [at.%] fixed Cu/Ag rate of 1.0 are prepared using casting to estimate effects of Cu and Ag amount to precipitation behaviour and mechanical properties. The Vickers microhardness measurement was conducted to estimate mechanical property after ageing treatment microstructure observation was carried out using transmission electron microscopy. In peak-aged at 473 K hardness of each alloys was almost the same, but in peak-aged at 523 K, hardness of 0.35Cu-0.35Ag was higher than 0.18Cu-0.18Ag alloy.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Crystal Structure And Optical Properties Of TiO2 Thin Films Prepared By Reactive RF Magnetron Sputtering
Charakterystyka cienkich warstw TiO2 otrzymanych metodą reaktywnego rozpylania magnetronowego RF
Autorzy:
Goto, S.
Adachi, Y.
Matsuda, K.
Nose, M.
Tematy:
TiO2
rutile
anatase
sputtering
XRD
rutyl
anataz
rozpylanie
dyfrakcja promieniowania rentgenowskiego
Pokaż więcej
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Powiązania:
https://bibliotekanauki.pl/articles/352029.pdf  Link otwiera się w nowym oknie
Opis:
In sputtering deposition process of TiO2, metal Ti or sintered TiO2 target is used as deposition source. In this study, we have compared the characteristic of target materials. When TiO2 target was used, stoichiometric TiO2 films was deposited under the Ar atmosphere containing 1.0% of oxygen. The highest sputtering rate under this atmosphere was 3.9nm/min at 3.4W/cm2. But, sintered TiO2 target is fragile and cannot endure higher density of input power than 3.4W/cm2. On the other hand, Ti target needs higher oxygen concentration (8%) in sputtering gas atmosphere for obtaining rutile/anatase. Even though Ti target can be input twice power density of 7.9W/cm2, the highest deposition rate for Ti target was 1.4/nm, which was ~35% of the highest rate for TiO2 target. Then we have study out the composite target consisting of Ti plate and TiO2 chips. Using the composite target, stoichiometric TiO2 films were prepared in the rate of 9.6nm/min at 6.8 W/cm2 under the atmosphere of Ar/2.5%O2. Furthermore, we have found that the TiO2 films obtained from the composite target consisted of about 100% anatase, whereas TiO2 films obtained from other target have rutile dominant structure. The optical band gap energy of the film is determined by using the Tauc plot. The calculated band gap energies for the films deposited by Ti target and composite target were 2.95 and 3.24eV, which are equivalent to that of rutile and anatase structure, respectively.
W procesie nanoszenia TiO2 metodą rozpylania, jako tarczy używano metalicznego Ti lub spiekanego TiO2. W pracy dokonano porównania obu materiałów. W przypadku zastosowania jako tarczy TiO2 przy nanoszeniu w atmosferze Ar zawierającym 1,0% tlenu otrzymano stechiometryczną warstwę TiO2. Największa uzyskana szybkość rozpylania w tej atmosferze wyniosła 3,9 nm/min przy gęstości mocy wejściowej 3,4 W/cm2. Jednak spiekany TiO2 jest kruchy i nie wytrzymuje gęstości mocy wejściowej powyżej 3,4 W/cm2. Z drugiej strony, przy rozpylaniu z tarczy Ti konieczne jest zwiększone stężenie tlenu (8%) w atmosferze aby otrzymać fazę rutyl/anataz. Mimo że tarcza Ti wytrzymuje gęstość mocy dwa razy wyższą niż TiO2 (7,9 W/cm2), największa uzyskana szybkość rozpylania wynosiła 1,4 nm/min, co stanowi ~35% najwyższej szybkości uzyskanej dla tarczy TiO2. Zbadano także tarczę kompozytową składające się z płyty Ti oraz wiórów TiO2. W przypadku zastosowania tarczy kompozytowej, szybkość rozpylania wyniosła 9,6 nm/min przy mocy 6,8 W/cm2 w atmosferze Ar/2,5%O2. Dodatkowo, warstwy TiO2 otrzymane z tarczy kompozytowej zawierały około 100% anatazu, podczas gdy w przypadku warstw otrzymanych z pozostałych tarcz dominowała faza rutylu. Szerokość przerwy energetycznej wyznaczono na podstawie wykresu Tauca. Obliczone wartości przerwy energetycznej wynosiły 2,95 eV dla podłoża Ti i 3,24 eV dla podłoża kompozytowego, co odpowiada wartością przerw odpowiednio dla rutylu i anatazu.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Corrosion Behavior of Crofer 22APU for Metallic Interconnects in Single and Dual Atmosphere Exposures at 1073 K
Autorzy:
Stygar, M.
Matsuda, K.
Lee, S.
Brylewski, T.
Tematy:
81.05.Bx
81.65.Mq
81.70.-q
87.64.Ee
88.30.pn
Pokaż więcej
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Powiązania:
https://bibliotekanauki.pl/articles/1032920.pdf  Link otwiera się w nowym oknie
Opis:
To determine the impact of an oxidizing Ar-H₂-H₂O/air dual atmosphere on the kinetics and mechanism of oxidation of the Crofer 22APU steel as compared to oxidation in a single atmosphere (Ar-H₂-H₂O or air), the oxidation kinetics of this steel were investigated both in single and dual reaction atmospheres at 1073 K during 100, 250, 500, and 1000 h of oxidation. Detailed morphological observations and the results of chemical composition analyses carried out using transmission electron microscopy combined with energy-dispersive X-ray spectroscopy revealed the presence of Fe in the scale formed on the cathode side in the dual atmosphere. Based on morphological observations (scanning- and transmission electron microscopies) and chemical and phase composition analyses (energy-dispersive X-ray spectroscopy and X-ray diffraction, respectively) of the products of oxidation of the Crofer 22APU steel, and on the determined oxidation kinetics, a mechanism describing scale growth on both sides of the steel during its oxidation in conditions involving a gradient of the chemical potential of oxygen and hydrogen was proposed.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
HRTEM observation of age-precipitation in Mg-Gd-Y alloys
Obserwacja wydzieleń w starzonych stopach Mg-Gd-Y techniką wysokorozdzielczej transmisyjnej mikroskopii elektronowej
Autorzy:
Nakagawa, D.
Kawabata, T.
Ikeno, S.
Matsuda, K.
Tematy:
Mg-Gd-Y alloy
precipitation
HRTEM
stop Mg-Gd-Y
wydzielenia
Pokaż więcej
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Powiązania:
https://bibliotekanauki.pl/articles/353841.pdf  Link otwiera się w nowym oknie
Opis:
Precipitation in Mg-Gd-Y alloys which have the different total amount of RE were investigated by HRTEM and SAED technique, and calculation of HRTEM images and electron density by first principles to understand the relationship between precipitation in these alloys and HRTEM images. The diffuse scattering by SAED was obtained in as-quenched samples in each alloy, and mono-layer zones have been confirmed by HRTEM observation. The atomic position just consisted of the RE and Mg columns show the black contrast, and the bright dots correspond to the space surrounding by the six Mg columns of hexagonal network with 0.18 nm. This is also corresponded the distribution of electron density of the cluster according to calculation by first principles.
W stopach Mg-Gd-Y o różnej zawartości metali ziem rzadkich badano procesy wydzielania za pomocą technik HRTEM i SAED oraz symulowania obrazów HRTEM i gęstości elektronów przy użyciu pierwszych zasad w celu zrozumienia korelacji między wydzieleniami w tych stopach i obrazami HRTEM. W przesyconych próbkach we wszystkich stopach widoczne było na obrazach SAED rozpraszanie dyfuzyjne, a monowarstwowe strefy zostały potwierdzone podczas obserwacji HRTEM. Pozycje atomowe złozone tylko z kolumn atomów ziem rzadkich i Mg daja czarny kontrast, a jasne punkty odpowiadaja pozycjom otoczonym przez sześć kolumn Mg o sieci heksagonalnej o odległosci 0.18 nm. Odpowiada to również rozkładowi gęstości elektronowej klastra zgodnie z obliczeniami metodą pierwszych zasad.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Analysis Of Structure For The Multi-Layered Of Ge/TiO2 Films Prepared By The Differential Pressure Co-Sputtering
Analiza struktury wielowarstwowych filmów Ge/TiO2 wytwarzanych metodą różnicowo-ciśnieniowego współrozpylania jonowego
Autorzy:
Adachi, Y.
Abe, S.
Matsuda, K.
Nose, M.
Tematy:
TiO2
solar cells
sputtering
ogniwa słoneczne
rozpylanie
Pokaż więcej
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Powiązania:
https://bibliotekanauki.pl/articles/354833.pdf  Link otwiera się w nowym oknie
Opis:
We tried to fabricate the Ge/TiO2 composite films with the differential pressure (pumping) co-sputtering (DPCS) apparatus in order to improve the optical properties. In the study, the micro structure of these thin films has been evaluated. TEM image revealed that the thin film was alternately layered with TiO2 and Ge, lattice fringes were observed both of Ge layer and TiO2 layer. There were portions that lattice fringe of Ge was disturbed near the interface of Ge and TiO2. X-ray photoelectron spectroscopy elucidated that there were few germanium oxides and a part with the thin film after annealed.
W pracy przedstawiono rezultaty badań mających na celu wytworzenie warstw kompozytowych Ge/TiO2 wykorzystując aparaturę do różnicowo-ciśnieniowego współrozpylania jonowego (DPCS) w celu poprawy właściwości optycznych. Mikrostruktura warstw została zbadana z zastosowaniem mikroskopii TEM. Analiza TEM wykazała, że cienki film składał się z naprzemiennie ułożonych warstw TiO2 oraz Ge, a dodatkowo zlokalizowano krawędzie sieci przestrzennych Ge i TiO2. Rentgenowska spektroskopia fotoelektronów wykazała niewielkie ilości tlenków germanu oraz występowanie cienkiego filmu po procesie wyżarzania.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Age-Precipitations Structure Of Al-Mg-Ge Alloy Aged At 473K
Umacnianie wydzieleniowe stopu z Al-Mg-Ge po starzeniu w 473K
Autorzy:
Kawai, A.
Watanabe, K.
Matsuda, K.
Ikeno, S.
Tematy:
Al-Mg-Ge alloy
TEM
age-precipitate
age-precipitation sequence
stop Al-Mg-Ge
umacnianie wydzieleniowe
Pokaż więcej
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Powiązania:
https://bibliotekanauki.pl/articles/356692.pdf  Link otwiera się w nowym oknie
Opis:
The Al-Mg-Ge alloy is one of the age-hardening aluminum alloy after solution heat treatment. It has been proposed that the age-precipitation behavior of Al-Mg-Ge alloy is different from that of Al-Mg-Si alloy according to our previous works about the microstructure on Al-Mg-Ge alloy over-aged at 523K. For example, The hardness of peak aged Al-1.0mass%Mg2Ge alloy is higher than that of Al-1.0mass%Mg2Si alloy. The precipitates in the over-aged samples have been classified as some metastable phases, such as the β’-phase and Type-A precipitates and equilibrium phase of β-Mg2Ge by TEM observation. There a few reports about microstructure on Al-Mg-Ge alloys observed by TEM for different aging times. The age-precipitations structure of Al-Mg-Ge alloy has not been became clear. In this work, TEM observation was investigated the microstructure on Al-1.0mass%Mg2Ge alloy for difference aging times aged at 473K.
Stop Al-Mg-Ge należy do grupy stopów aluminium podatnych na obróbkę cieplną w postaci przesycania prowadzącą do utwardzenia wydzieleniowego. Na podstawie wcześniejszych badań dotyczących mikrostruktury stopu Al-Mg-Ge, starzonego w temp. 523K, przyjęto założenie, że proces utwardzania wydzieleniowego będzie zachodzić inaczej niż w przypadku standardowych stopów Al-Mg-Si. Zaobserwowano, że twardość starzonego stopu Al-1,0(%mas.)Mg2Ge jest wyższa od analogicznego stopu Al-1,0(%mas.)Mg2Si. Jednocześnie dzięki zastosowaniu mikroskopii TEM określono skład fazowy próbek po przestarzeniu. Występujące fazy w stopie Al-Mg-Ge to m.in. faza β’, wytrącenia typu A oraz faza równowagowa β-Mg2Ge. Dodatkowo, badania mikrostruktury z użyciem mikroskopii TEM wykonano dla różnych czasów starzenia stopu Al-1,0(%mas.)Mg2Ge, starzonego w temperaturze 473K.
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies