Autor: Sun, T. - Prolib Integro

Skocz do pozycji: 1.

Tytuł:: Research on interaction of APFs based on relative gain array
Autorzy:: Feng, X.
Sun, T.
Ma, W.
Tematy:: interaction effect
relative gain array
active power filter
Norton equivalent
LCL filter; Pokaż więcej
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Powiązania:: https://bibliotekanauki.pl/articles/141523.pdf Link otwiera się w nowym oknie
Opis:: Different APFs (Active Power Filter) interact with each other when multiple APFs are connected to the grid, and the interactions deteriorate the control performance of APFs and even lead to system instability. This paper presents a method to analyze the dynamic interaction of multiple APFs in a weak grid. This method uses the Norton equivalent principle to establish the mathematical model of a single APF. The mathematical model of the multiple APFs connected to the grid is set up based on the single APF mode. The RGA (Relative Gain Array) principle is used to analyze the interactions among multiple APFs. Besides, this paper analyzes the effect of changing circuit parameters and controller parameters on the change of the interactions. The strategy of weakening and eliminating the interaction is proposed based on rational selection and combination of parameters. Analysis, along with time domain simulation and experimental results, is presented to verify the feasibility and effectiveness of the proposed method and strategy.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 2.

Tytuł:: The Antibacterial Activities of Ag/$Nano-TiO_2$ Modified Silicone Elastomer
Autorzy:: Wang, L.
Sun, T.
Zhou, S.
Shao, L.
Tematy:: 78.67.Bf; Pokaż więcej
Wydawca:: Polska Akademia Nauk. Instytut Fizyki PAN
Powiązania:: https://bibliotekanauki.pl/articles/1215694.pdf Link otwiera się w nowym oknie
Opis:: We studied the ability of Ag/$nano-TiO_2$ to inhibit Staphylococcus aureus growth on silicone elastomer material. Ag/$nano-TiO_2$ silicone elastomer was prepared with different concentrations of 0%, 2%, 4%, 6%, 8%, 10%. The antibacterial efficacy of Ag/$nano-TiO_2$ silicone elastomer was determined by the inhibition zone method and the impregnated culture method. The antibacterial timeliness of Ag/$nano-TiO_2$ silicone elastomer was tested by direct contact method. The samples were kept through thermal aging process in an accelerated aging chamber. The effect of concentrations of Ag/$nano-TiO_2$ was insignificant (P < 0.05). There was significant difference between the Ag/$nano-TiO_2$ silicone elastomer and the blank silicone elastomer (P < 0.5). There was also significant difference among specimen groups whose aging periods were 50°C, 100°C, 150°C, 200°C for 87 h (P < 0.5). The silicone elastomer with different concentrations of Ag/$nano-TiO_2$ effectively inhibits Staphylococcus aureus growth.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 3.

Tytuł:: The Influence of Different Resin Cements and Pretreatments on the Bond Strength between Zirconia and Cement
Autorzy:: Sun, T.
Hu, C.
Wang, L.
Shao, L.
Tematy:: 87.85.jc; Pokaż więcej
Wydawca:: Polska Akademia Nauk. Instytut Fizyki PAN
Powiązania:: https://bibliotekanauki.pl/articles/1218424.pdf Link otwiera się w nowym oknie
Opis:: The aim of this study was to analyze the influence of various luting materials and surface treatments on adhesive strength for zirconia ceramics and luting cements. The zirconia framework specimens were made into cylinders. Prior to cement, zirconia framework specimens underwent various surface treatments (sandblasting with 110 μm $Al_2O_3$ particles, milling with 240-grift silicon sand paper and silanization). Resin luting cement and glass ionomer luting cement were then applied on the surface of zirconia specimens. The specimens were then subjected to a shear force. The fractured surfaces were visually analyzed by scanning electron microscopy. The shear bond strength values of resin luting cement bonded to zirconia specimens were significantly higher than glass ionomer luting cement bonded to zirconia specimens (P < 0.05). The shear bond strength values of zirconia specimens sandblasted with 110 μm $Al_2O_3$ particles were significantly higher than those milled with silicon carbide papers and underwent silanization (P < 0.05). The shear bond strength values of zirconia specimens milled with silicon carbide papers and underwent silanization were not significantly different (P < 0.05). The highest shear bond strength values were achieved when the zirconia specimens were sandblasted and bonded to resin luting cement. Airborne-particle abrasion was an effective method which could enhance the bond strength of zirconia ceramics and cements. The resin luting cement exhibited a higher bond to zirconia than glass ionomer luting cement.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 4.

Tytuł:: Quaternion-based filtering for gyroless attitude estimation without an attitude dynamics model
Autorzy:: Zhang, S.
Xing, F.
Sun, T.
You, Z.
Tematy:: quaternion-based filtering
gyroless attitude estimation
angular velocity determination
Kalman filter; Pokaż więcej
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Powiązania:: https://bibliotekanauki.pl/articles/220655.pdf Link otwiera się w nowym oknie
Opis:: Conventionally, the filtering technique for attitude estimation is performed using gyros or attitude dynamics models. In order to extend the application range of an attitude filter, this paper proposes a quaternion-based filtering framework for gyroless attitude estimation without an attitude dynamics model. The attitude estimation system is established based on a quaternion kinematic equation and vector observation models. The angular velocity in the system is determined through observation vectors from attitude sensors and the statistical properties of the angular velocity error are analysed. A Kalman filter is applied to estimate the attitude error such that the effect from the angular velocity error is compensated with its statistical properties at each sampling moment. A numerical simulation example is presented to illustrate the performance of the proposed algorithm.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 5.

Tytuł:: Shear Bond Strength Comparison between Conventional Dental Nano Zirconia Combinations and New Functionally Graded Nano Zirconia Combinations after Thermal-Mechanical Cycling
Autorzy:: Sun, T.
Lai, R.
Liu, R.
Shao, L.
Tematy:: 87.85.jc; Pokaż więcej
Wydawca:: Polska Akademia Nauk. Instytut Fizyki PAN
Powiązania:: https://bibliotekanauki.pl/articles/1215622.pdf Link otwiera się w nowym oknie
Opis:: The aim of the study was to evaluate the core-veneer bond strength of graded zirconia combinations and compared those to conventional zirconia combinations after thermal and mechanical tests. Conventional zirconia-veneer combinations and graded zirconia-veneer combinations were made into cylinders. Prior to shear bond testing, half of each group was subjected to thermal and mechanical cycling testing at three conditional levels. All specimens were thereafter subjected to a shear force. The fractured surfaces were visually analyzed with scanning electron microscopy. The shear bond strength values of functionally graded zirconia combinations were significantly higher than zirconia combinations, irrespective of the fatigue conditions (P < 0.05). The shear bond strength values of graded zirconia combinations and zirconia combinations before thermal-mechanical cycling were higher than after (P < 0.05). The shear bond strength values of graded zirconia combinations was $40.99 ± 2.22$ MPa, $39.44 ± 2.36$ MPa, $37.45 ± 2.06$ MPa, and $36.87 ± 2.18$ MPa for conditions 0 to 3, respectively. The shear bond strength values were $26.75 ± 2.16$ MPa, $23.95 ± 2.16$ MPa, $21.65 ± 2.14$ MPa, and $20.49 ± 2.16$ MPa for zirconia combinations from conditions 0 to 3, respectively. The functionally graded zirconia combinations exhibited greater shear bond strength than zirconia combinations, irrespective of the fatigue conditions. Thermal-mechanical cycling had an impact on the shear bond strength of both graded zirconia combinations and conventional zirconia combinations.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 6.

Tytuł:: Molecular Dynamics Simulation Studies of the CL-20/DNB Co-crystal
Autorzy:: Sun, T.
Xiao, J. J.
Ji, G. F.
Zhao, F.
Xiao, H. M.
Tematy:: CL-20/DNB co-crystal
composite
interactions
mechanical properties
molecular dynamics simulation; Pokaż więcej
Wydawca:: Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Powiązania:: https://bibliotekanauki.pl/articles/358075.pdf Link otwiera się w nowym oknie
Opis:: Molecular dynamics (MD) simulation was conducted for a DNB (1,3-dinitrobenzene) crystal, a ε-CL-20 (2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane) crystal, a CL-20/DNB co-crystal and a CL-20/DNB composite. From the calculated maximum bond length (Lmax) of the N−NO2 trigger bond, the cohesive energy density (CED) and the binding energy (Ebind), it was found that the CL-20/DNB co-crystal is more insensitive than its composite. Its thermal stability is also better than that of its composite. The pair correlation function (PCF) analysis method was applied to investigate the interfaces between different molecular layers in the CL-20/DNB co-crystal, and in the composite. Additionally, the calculated mechanical data showed that the moduli of the CL-20/DNB co-crystal and its composite are smaller and their elastic elongation and ductility are better than those of the ε-CL-20 and DNB crystals.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 7.

Tytuł:: Preservation of mushroom in storage after vacuum cooling treatment
Autorzy:: Fei, T.
Min, Z.
Sun, J.
Wydawca:: Polska Akademia Nauk. Instytut Agrofizyki PAN
Powiązania:: https://bibliotekanauki.pl/articles/24444.pdf Link otwiera się w nowym oknie
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 8.

Tytuł:: Hemodynamic impacts of left coronary stenosis : a patient-specific analysis
Autorzy:: Chaichana, T.
Sun, Z.
Jewkes, J.
Tematy:: coronary artery disease
computational fluid dynamics (CFD)
wall shear stress
tętnica wieńcowa
dynamika cieczy
naprężenie; Pokaż więcej
Wydawca:: Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Powiązania:: https://bibliotekanauki.pl/articles/306747.pdf Link otwiera się w nowym oknie
Opis:: This study analyses the hemodynamic variations surrounding stenoses located at the left coronary bifurcation, and their influence on the wall shear stress (WSS) in realistic coronary geometries. Four patients with suspected coronary artery disease were chosen, and coronary models were reconstructed based on high-resolution CT data. The coronary stenoses were observed at the left circumflex and left anterior descending branches, resulting in a lumen narrowing of >50%. Flow analysis was performed using computational fluid dynamics, to simulate the cardiac flow conditions of the realistic individual patient geometry. Blood flow and WSS changes in the left coronary artery were calculated throughout the entire cardiac phases. Our results revealed that the recirculation regions were found at the poststenotic locations. WSS was found to increase at the stenotic positions in all four patients. There is a strong correlation between coronary stenosis and the hemodynamic changes, which are reflected in blood flow pattern and WSS, based on the realistic left coronary geometries.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 9.

Tytuł:: Applicability of soil column incubation experiments to measure CO2 efflux
Autorzy:: Guo, L.
Nishimura, T.
Imoto, H.
Sun, Z.
Wydawca:: Polska Akademia Nauk. Instytut Agrofizyki PAN
Powiązania:: https://bibliotekanauki.pl/articles/25334.pdf Link otwiera się w nowym oknie
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 10.

Tytuł:: Cycle life prediction of Lithium-ion cells under complex temperature profiles
Prognozowanie cyklu życia ogniw litowo-jonowych przy złożonych profilach temperaturowych
Autorzy:: Liu, T.
Cheng, L.
Pan, Z.
Sun, Q
Tematy:: lithium-ion cells
capacity fade
complex temperature profiles
life prediction
reliability assessment
ogniwa litowo-jonowe
utrata pojemności
złożone profile temperaturowe
prognozowanie trwałości
ocena niezawodności; Pokaż więcej
Wydawca:: Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Powiązania:: https://bibliotekanauki.pl/articles/301978.pdf Link otwiera się w nowym oknie
Opis:: Nowadays, the extensive use of Lithium-ion cells requires an accurate life prediction model. Failure of Lithium-ion cells usually results from a gradual and irreversible capacity fading process. Experimental results show that this process is strongly affected by temperature. In engineering applications, researchers often use the regression-based approach to model the capacity fading process over cycles and then perform the cycle life prediction. However, because of neglecting temperature influences, this classic method may lead to significant prediction errors, especially when cells are subject to complex temperature profiles. In this paper, we extend the classic regression-based model by incorporating cell temperature as a predictor. Two effects of temperature on cell capacity are considered. One is the positive effect that high temperature lets a cell discharge more capacity in a cycle; The other is the negative effect that high temperature accelerates cell capacity fading. A cycle life test with six cells are conducted to valid the effectiveness of our method. Results show that the improved model is more suitable to capture the dynamics of cell capacity fading path under complex temperature profiles.
Obecne szerokie zastosowanie ogniw litowo-jonowych wymaga stworzenia trafnego modelu prognozowania ich trwałości. Uszkodzenia ogniw litowo-jonowych zazwyczaj wynikają ze stopniowego i nieodwracalnego procesu utraty pojemności. Wyniki doświadczeń pokazują, że na ten proces silny wpływ wywiera temperatura. W zastosowaniach inżynieryjnych, naukowcy często wykorzystują podejście oparte na regresji do modelowania procesu utraty pojemności w poszczególnych cyklach by następnie dokonać prognozy trwałości w danym cyklu pracy. Jednakże, ta klasyczna metoda nie bierze po uwagę wpływu temperatury, co może prowadzić do znacznych błędów predykcji, w szczególności, gdy ogniwa pozostają pod wpływem złożonych profili temperaturowych. W prezentowanym artykule, rozszerzono klasyczny model oparty na regresji poprzez włączenie temperatury ogniwa jako czynnika prognostycznego. Przeanalizowano dwa rodzaje wpływu temperatury na pojemność ogniw. Z jednej strony, wysoka temperatura oddziałuje pozytywnie pozwalając ogniwu na uzyskanie większej pojemności w danym cyklu; z drugiej strony jest to wpływ negatywny, ponieważ wysoka temperatura przyspiesza utratę pojemności ogniwa. Przy użyciu sześciu ogniw, przeprowadzono badanie trwałości w danym cyklu pracy w celu potwierdzenia skuteczności naszej metody. Wyniki pokazują, że udoskonalony model pozwala lepiej uchwycić dynamikę ścieżki utraty pojemności ogniwa w warunkach złożonych profili temperaturowych.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Informacja

Wyszukujesz frazę "Sun, T." wg kryterium: Autor