Autor: Xu, Fang - Prolib Integro

Skocz do pozycji: 1.

Artykuł

na półce

Skocz do pozycji: 2.

Tytuł:: Performance and mechanism of Carrousel oxidation ditch and water Spinach wetland combined process in treating water hyacinth (Pontederia crassipes) biogas slurry
Autorzy:: Yu, Yaqin
Fang, Xueyou
Li, Lanying
Xu, Yumeng
Tematy:: Pontederia crassipes
biogas slurry
Carrousel oxidation ditch
water spinach wetland
refractory organics; Pokaż więcej
Wydawca:: Polska Akademia Nauk. Czasopisma i Monografie PAN
Powiązania:: https://bibliotekanauki.pl/articles/27311538.pdf Link otwiera się w nowym oknie
Opis:: Owing to its high concentrations of nitrogen and phosphorus, the slurry from water hyacinth (Pontederia crassipes) biogas production cannot be discharged directly without further treatment. To achieve the target of water recycling, a new strategy of combining a Carrousel oxidation ditch with a water spinach wetland was developed in this study for the harmless treatment of Pontederia crassipes biogas slurry. First, the water quality characteristics of the biogas slurry were measured. Then, comprehensive tests of the combined slurry treatment system were carried out to verify pollutant removal performance and mechanism. The results showed that the Carrousel oxidation ditch reduced the inlet pollutant load of the subsequent water spinach wetland. The chemical oxygen demand (COD), and ammonium nitrogen (NH4+-N), total nitrogen (TN), and total phosphorus (TP) contents of the average effluent from the combined system were less than 50 mg/L, 1.6 mg/L, 6 mg/L, and 0.5 mg/L, respectively, which means that all met urban sewage treatment standard of Level 1 Grade A (GB18918-2002). Gas chromatography – mass spectrometry analysis showed that the combined system had decreased various types of organic pollutants in the biogas slurry exponentially, efficiently removing alkane pollutants, aromatic hydrocarbons, and heterocyclic compounds. Scanning electron microscopy images revealed very large surface area of the water spinach roots in the wetland, which played important roles in enriching the microorganisms and trapping organic matter. Plant absorption, microbial degradation, and filtration were the primary ways in which the water spinach wetland purified the biogas slurry.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 3.

Tytuł:: Research on sand resistance performance of comprehensive protection facilities for desert hinterland highways under strong wind environment
Autorzy:: Yan, Wenhua
Wang, Xu
Wu, Yongxiang
Wang, Fang
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Powiązania:: https://bibliotekanauki.pl/articles/2174072.pdf Link otwiera się w nowym oknie
Opis:: Based on the test and observation of the desert hinterland wind field, combined with the numerical simulation of Fluent wind-sand two-phase flow, the sand resistance performances of comprehensive protection in the desert hinterland under strong wind environment are researched. The transient wind speed and wind direction around the comprehensive protection facility are measured by two 3D ultrasonic anemometers on the highway in the desert hinterland, and the initial wind speed of the sand flow is provided for the numerical simulation boundary. The sedimentary sand particles around the comprehensive protection facility are collected for particle size analysis, and the particle size distributions of sedimentary sand particles at different locations are obtained. Numerical models of high vertical sand barriers, grass checkered sand barriers and roadbeds are established by Fluent, the wind-sand flow structures around the comprehensive protection facilities and desert hinterland highway under the strong wind environment are obtained, and the influence laws of the comprehensive protection facilities on the movement of wind-sand flow and sand deposition characteristics are obtained. The study found that the comprehensive protection facilities disturbed the wind and sand flow, and there are significant airflow partitions around the comprehensive protection facilities. The wind speed decreases rapidly after the wind-sand flows through the high vertical sand barrier; the wind-sand flow rises at the end of the high vertical sand barrier. When the wind-sand flow moves around the grass checkered sand barrier, the wind speed has dropped to the range of 0-3 m/s, and the wind speed near the ground by the grass checkered sand barrier is further reduced. Due to the existence of the concave surface of the grass grid, there are small vortices inside the grass grid sand barrier. Large sand particles are mainly deposited on the windward side and inside of high vertical sand barriers. The grass checkered sand barrier forms a stable concave surface to generate backflow, which can ensure that the sand surface does not sand itself in a strong wind environment, and can also make a small amount of sand carried in the airflow accumulate around the groove of the grass checkered sand barrier. The numerical simulation results are consistent with the measured results, and the comprehensive protection measures have achieved good sand control effects.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 4.

Tytuł:: Reliability assessment of the port power system based on integrated energy hybrid system
Autorzy:: Fang, Liang
Xu, Xiao-Yan
Xia, Jun
Tarasiuk, Tomasz
Tematy:: Markov model
distributed generation
reliability assessment
integrated energy
distribution power system
model Markowa
generacja rozproszona
ocena wiarygodności
energia zintegrowana
system zasilania dystrybucyjny; Pokaż więcej
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Powiązania:: https://bibliotekanauki.pl/articles/2173637.pdf Link otwiera się w nowym oknie
Opis:: The conventional port distribution power system is being disrupted by increasing distributed generation (DG) levels based on integrated energy. Different new energy resources combine with conventional generation and energy storage to improve the reliability of the systems. Reliability assessment is one of the key indicators to measure the impact of the distributed generation units based on integrated energy. In this work, an analytical method to investigate the impacts of using solar, wind, energy storage system (ESS), combined cooling, heating and power (CCHP) system and commercial power on the reliability of the port distribution power system is improved, where the stochastic characteristics models of the major components of the new energy DG resources are based on Markov chain for assessment. The improved method is implemented on the IEEE 34 Node Test Feeder distribution power system to establish that new energy resources can be utilized to improve the reliability of the power system. The results obtained from the case studies have demonstrated efficient and robust performance. Moreover, the impacts of integrating DG units into the conventional port power system at proper locations and with appropriate capacities are analyzed in detail.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 5.

Tytuł:: Effect of boron on ZSM-5 catalyst for methanol to propylene conversion
Autorzy:: Xu, A.
Ma, H.
Zhang, H.
Ying, W.
Fang, D.
Tematy:: methanol to propylene
ZSM-5
boron modifi cation
propylene; Pokaż więcej
Wydawca:: Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Powiązania:: https://bibliotekanauki.pl/articles/777971.pdf Link otwiera się w nowym oknie
Opis:: B-ZSM-5 catalysts were prepared by various modification methods with boric acid, including ion-exchange, impregnation and direct synthesis. The catalysts were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), NH3-Temperature Programmed Desorption (NH3-TPD), N2 adsorption-desorption, Fourier Transform Infrared spectrometry (FT-IR), 27Al and 11B MAS NMR spectra. The results revealed that the weak acidity of catalysts was significantly increased by modification. The catalytic activity was measured in a fixed bed at 460°C for methanol to propylene (MTP) reaction. The results of MTP reaction showed a great increment of the propylene selectivity for the boron modified samples, especially for the directly synthesized B-ZSM-5 which also displayed high activity and selectivity towards C2 =-C4 = olefins. It was found that the remarkable selectivity strongly depended on the intensity of weak acidity.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 6.

Tytuł:: Virtual–real fusion maintainability verification based on adaptive weighting and truncated spot method
Autorzy:: Ge, Zhexue
Zhang, Yi
Wang, Fang
Luo, Xu
Yang, Yongmin
Tematy:: virtual–real fusion maintainability
maintainability verification
adaptive weighting method
truncated SPOT method; Pokaż więcej
Wydawca:: Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Powiązania:: https://bibliotekanauki.pl/articles/2200935.pdf Link otwiera się w nowym oknie
Opis:: Maintainability is an important general quality characteristic of products. Insufficient maintainability will lead to long maintenance time and high maintenance cost, thus affecting the availability of products. Maintainability verification is an important means to ensure maintainability meets design requirements. However, the cost of traditional real maintainability verification method is very high, and the virtual maintenance method has insufficient verification accuracy due to the lack of large maintenance force feedback when the human body is moving. In order to reduce the evaluation error and test sample size, the paper conducts maintainability verification based on the mixed physical and virtual maintainability test scenarios. Aiming at the problem that traditional methods are difficult to deal with the real test information and synchronous virtual simulation information in the test process, this study proposes a virtual–real fusion maintainability evaluation algorithm based on adaptive weighting and truncated SPOT (Sequential Posterior Odd Test) method. It can weigh real test information and virtual human simulation information adaptively to obtain a virtual–real fusion maintainability test sample. Then, the SPOT method is used to evaluate the maintainability of small samples. The adjustment of valve clearance, replacement of air filter element and replacement of starting motor maintenance tasks of ship engine are taken as examples for demonstration. The virtual–real fusion and virtual maintainability verification methods are respectively used for verification, and compared with the physical maintenance scenario constructed by 3D printing, indicating that the accuracy of virtual–real fusion maintainability test verification is 89%, while the virtual maintainability verification is only 33%.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 7.

Tytuł:: Process mineralogy of Bayan Obo rare earth ore by MLA
Autorzy:: Xu, Caili
Chi, Ru’an
Zhang, Yantu
Zhong, Chengbin
Ruan, Yaoyang
Lyu, Renliang
Zhou, Fang
Tematy:: process mineralogy
rare earth
Bayan Obo ore
MLA; Pokaż więcej
Wydawca:: Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Powiązania:: https://bibliotekanauki.pl/articles/1449295.pdf Link otwiera się w nowym oknie
Opis:: The maximum recovery of rare earth resource from the Bayan Obo ore deposit is a difficult task, especially without the sufficient data of mineralogy. In this paper the mineralogy of Bayan Obo ore deposit by comprehensively research with the application of mineral liberation analyzer (MLA) is reported. The MLA was applied to quantitatively analyze the complicated element/mineral compositions, the REE occurrence, the size distribution and the degree of liberation of the Bayan Obo ore. Mineralogical analysis of the rare earth ore has shown that REEs are present mainly as bastnaesite and monazite-(Ce) to a small extent as parisite-(Ce). 5.85% of the REEs, 34.99% of iron and 0.12% of niobium occur in the ore sample. There are 76.99% of iron occurred in hematite and the remaining iron is mainly distributed in magnetite and goethite. The degree of liberation of bastnaesite and monazite(Ce) was 79.65% and 75.67% respectively when the grinding fineness was 83.57% passing 75 μm sieves. Un-liberated or partly liberated rare earth minerals are associated closely mainly with other rare earth minerals and gangues. These theoretical data could be employed to further comprehensively utilize the rare earth ore.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 8.

Tytuł:: Facile Synthesis and Characterization of Novel CdS/BiOI Heterojunctions with Enhanced Visible-Light Photocatalytic Performances
Autorzy:: Fang, Shanshan
Lu, Min
Zhou, Man
Li, Zhongyu
Xu, Song
Peng, Yanyan
Li, Qinchi
Lu, Dayong
Tematy:: CdS/BiOI heterojunctions
visible-light photocatalyst
photocatalytic activity
nanocomposites; Pokaż więcej
Wydawca:: Polska Akademia Nauk. Instytut Fizyki PAN
Powiązania:: https://bibliotekanauki.pl/articles/1030343.pdf Link otwiera się w nowym oknie
Opis:: Novel CdS/BiOI heterojunction photocatalysts were successfully prepared by facile method. The as-prepared samples were characterized by transmission electron microscopy, field-emission scanning electron microscopy, X-ray diffraction, the Raman spectroscopy, UV-vis diffuse reflectance spectra, the Fourier transform infrared spectra, and photoluminescence. It was found that CdS nanoparticles were uniformly distributed on the surface of BiOI microspheres. The photodegradation tests showed that the photocatalytic efficiency was increased at first and then decreased when further increasing CdS content in the nanocomposites. The highest activity was obtained by 3%-CdS/BiOI nanocomposites. The enhanced photocatalytic performances were attributed to the matched band potentials of CdS and BiOI, which resulted in the efficient separation of photogenerated electron-hole pairs. Based on the experimental results, a reasonable photocatalytic mechanism of CdS/BiOI photocatalysts was also proposed.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 9.

Tytuł:: Time-frequency Representation -enhanced Transfer Learning for Tool Condition Monitoring during milling of Inconel 718
Autorzy:: Zhou, Yuqing
Sun, Wei
Ye, Canyang
Peng, Bihui
Fang, Xu
Lin, Canyu
Wang, Gonghai
Kumar, Anil
Sun, Weifang
Tematy:: tool condition monitoring
time-frequency analysis
Markov Transition Field
transfer learning; Pokaż więcej
Wydawca:: Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Powiązania:: https://bibliotekanauki.pl/articles/24200823.pdf Link otwiera się w nowym oknie
Opis:: Accurate tool condition monitoring (TCM) is important for the development and upgrading of the manufacturing industry. Recently, machine-learning (ML) models have been widely used in the field of TCM with many favorable results. Nevertheless, in the actual industrial scenario, only a few samples are available for model training due to the cost of experiments, which significantly affects the performance of ML models. A time-series dimension expansion and transfer learning (TL) method is developed to boost the performance of TCM for small samples. First, a time-frequency Markov transition field (TFMTF) is proposed to encode the cutting force signal in the cutting process to two-dimensional images. Then, a modified TL network is established to learn and classify tool conditions under small samples. The performance of the proposed TFMTF-TL method is demonstrated by the benchmark PHM 2010 TCM dataset. The results show the proposed method effectively obtains superior classification accuracies for small samples and outperforms other four benchmark methods.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 10.

Tytuł:: Factors influencing the mental health status of support nurses and their workload during the COVID-19 epidemic
Autorzy:: Dai, Zhen-Juan
Xu, Shen-Ting
Xue, Fang-Ying
Zhou, Jian-Ying
Chen, Jian-Qin
Wang, Xue-Min
Tematy:: COVID-19
mental health
epidemic prevention and control
general mental health questionnaire
NASA-TLX
support nurse; Pokaż więcej
Wydawca:: Instytut Medycyny Pracy im. prof. dra Jerzego Nofera w Łodzi
Powiązania:: https://bibliotekanauki.pl/articles/23369109.pdf Link otwiera się w nowym oknie
Opis:: Objectives The authors used the National Aeronautics and Space Administration Task Load Index (NASA-TLX) and general health questionnaire to analyze the factors influencing the mental health status and the workload of support nurses during the COVID-19 epidemic. Material and Methods The authors conducted a cross-sectional survey of 349 support nurses in April–October 2022. Using QuestionStar, a powerful online survey tool, the authors administered surveys to the participants, collected data on the mental health status and workload of support nurses, and analyzed the influencing factors based on the collected data. Results A total of 316 questionnaires were successfully collected, with an effective rate of 98.75%. The proportion of support nurses with mental health problems was 25% and the value of the NASA-TLX questionnaire was: M±SD 68.91±7.28 pts. Multi-factor analysis revealed that the number of children, family support, and nursing support location were the influencing factors of mental health status, while the multivariate analysis revealed that the presence of symptoms, nursing support location, support work type, and total 12-item General Health Questionnaire (GHQ-12) score were the influencing factors of the workload of support nurses. Conclusions Compared to their counterparts in the plains, nurses working in isolated plateau regions who were caring for children and lacked family support, were more likely to have mental health issues. There was a positive correlation between the changes in GHQ-12 and NASA-TLX scores of the study participants. Compared to their counterparts in the plains and the tropical regions, nurses working in plateau regions had a heavier workload. As part of the follow-up measures to prevent and treat patients impacted by the COVID-19 epidemic, it is important to improve the mental health evaluation, consultation, and treatment of the support nurses to guarantee the high quality of the first-line support work.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Informacja

Wyszukujesz frazę "Xu, Fang" wg kryterium: Autor