Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Yan, T." wg kryterium: Autor


Tytuł:
Dichloromethane-Extract of Propolis (DEP) and DEP/PLA Electrospun Fiber Membranes
Zastosowanie ekstrakt z propolisu (DEP) i do wytworzenia elektroprzędzonych membran światłowodowych DEP/PLA
Autorzy:
Yan, T.
Zhang, M.
Shi, Y.
Li, Y.
Tematy:
propolis
dichloromethane-extract of propolis DEP
electrospun
antibacterial
wyciąg z dichlorometanu propolisu
DEP
właściwości przeciwbakteryjne
Pokaż więcej
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Powiązania:
https://bibliotekanauki.pl/articles/946157.pdf  Link otwiera się w nowym oknie
Opis:
Propolis is a waxy substance produced by the honeybee that has been used as a form of traditional medicine and natural medicine since ancient times. Propolis has a wide spectrum of alleged applications, including potential anti-infection and anti-cancer effects. The following paper used a propolis extract containing 90% ethanol solution, 70% ethanol solution, ligarine, and dichloromethane as solvents that extracted the bioactive components. The highest yield of the propolis was obtained via the 70% ethanol leaching method and dichloromethane immersion stirring method. Fourier Transform Infrared (FTIR) analysis proved that the extracted propolis with dichloromethane had the highest methylene content and the maximum types of effective propolis components. A Propolis/PLA electrospinning solution was prepared by adding PLA powder into the supernatant of the dichloromethane-extract of propolis (DEP) directly, with there being no need for purification of the propolis extract and thus reducing the loss of active ingredients. DEP/PLA nanofiber was prepared via the electrospinning process, where it was found that with additional 4% PLA, the final electrospun fiber membrane was stabilised. tStudy of the antibacterial performance of the DEP/PLA electrospun membrane showed that the membrane affected some of the antibacterial properties. It was particularly effective when inhibiting Staphylococcus aureus, but not as effective when inhibiting Escherichia coli. This electrostatic spinning membrane could be used for food preservation, wound healing, and tissue engineering.
Propolis to woskowa substancja wytwarzana przez pszczołę miodną, która od starożytności była stosowana jako forma tradycyjnej medycyny i medycyny naturalnej. Propolis ma szerokie spektrum domniemanych zastosowań, w tym potencjalne działanie przeciwinfekcyjne i przeciwnowotworowe. W pracy użyto ekstraktu propolisu zawierającego 90% roztwór etanolu, 70% roztwór etanolu, ligarinę i dichlorometan jako rozpuszczalniki, które ekstrahowały składniki bioaktywne. Najwyższą wydajność propolisu uzyskano metodą wymywania 70% etanolu i metodą mieszania zanurzeniowego w dichlorometanie. Analiza w podczerwieni z transformacją Fouriera (FTIR) wykazała, że wyekstrahowany propolis z dichlorometanem miał najwyższą zawartość metylenu i dużą skuteczność. Roztwór propolis/PLA przygotowano przez dodanie proszku PLA bezpośrednio do ekstraktu z dichlorometanu propolisu (DEP), bez potrzeby oczyszczania, tym sposobem zmniejszono utraty składników aktywnych. Nanowłókno DEP/PLA zostało przygotowane w procesie elektroprzędzenia, w którym stwierdzono, że przy 4% PLA membrana z włókien elektroprzędzonych jest stabilna. Ocena skuteczności antybakteryjnej membrany DEP/PLA wykazała, że posiada ona właściwości przeciwbakteryjne. Stwierdzono zadowalającą skuteczność w hamowaniu Staphylococcus aureus, przy jednocześnie niższej skuteczności w hamowaniu Escherichia coli. Wytworzona membrana może być używana do konserwacji żywności, gojenia się ran i w inżynierii tkankowej.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Quantum Chemical Study of Aminonitrocyclopentanes as Possible High Energy Density Materials (HEDMs)
Autorzy:
Bai, J.
Chi, W. J.
Li, L. L.
Yan, T.
Wen, X. E.
Li, B. T.
Wu, H. S.
Ma, F. L.
Tematy:
cyclopentane derivatives
high energy density materials
impact sensitivity
quantum chemistry
DFT
available free space
Pokaż więcej
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Powiązania:
https://bibliotekanauki.pl/articles/358101.pdf  Link otwiera się w nowym oknie
Opis:
Nitro and amine groups were introduced into the cyclopentane skeleton, and the heats of formation, detonation performance, bond dissociation energies, and impact sensitivity for these aminonitrocyclopentanes were calculated in detail at the B3LYP/6-311G** level. The results show that all of the derivatives have negative heats of formation, which are influenced by the position of the substituent groups. Their stabilities were estimated and analyzed according to their bond dissociation energies and calculated characteristic H50 values. Most of the compounds were found to have a lower impact sensitivity than HMX. Furthermore, the detonation velocities and detonation pressures were predicted via the Kamlet-Jacobs equation. Of all these aminonitrocyclopentanes, E has the best detonation properties (ρ = 2.05 g/cm3, D = 9.11 m/s, P = 39.62 GPa) and can be considered as a candidate high energy density material.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Colloidal crystal cladded microfiber for refractive index sensing
Autorzy:
Yan, H. T.
Zhao, X Y
Zhang, Ch.
Zhen, Z Q
Li, Q Z
Cao, J X
Xia, L X
Tematy:
microfibers
colloidal crystals
refractive index sensing
Pokaż więcej
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Powiązania:
https://bibliotekanauki.pl/articles/174902.pdf  Link otwiera się w nowym oknie
Opis:
We investigate the evanescent field of a microfiber wrapped by colloidal crystals. The microfiber has the diameter of about 1 μm that is drawn from a single-mode fiber with an alcohol lamp. The colloidal spheres are further attached to the microfiber through thermal evaporation, then they self-assemble to crystal-like structures. The 400 nm, 590 nm, and 710 nm-diameter SiO2 colloidal spheres are used, respectively. The spectral responses are studied theoretically and experimentally, and the results agree with each other. It is revealed that the evanescent field of a microfiber could be modulated by the photonic band-gap of colloidal crystals. This characteristic is very useful in refractive index sensing for liquids.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Weibull failure model to the study of the hierarchical Bayesian reliability
Model uszkodzeń aproksymowa ny rozkładem Weibulla do badania niezaw odności reprezentowanej za pomocą hierarchicznej sieci Bayesowskiej
Autorzy:
Zhu, T.
Yan, Z.
Peng, X.
Tematy:
hierarchical Bayesian model
progressive type-II censoring
hyper parameter
Monte Carlo simulation
parameter estimation
hierarchiczny model bayesowski
ucinanie progresywne typu II
hiperparametr
symulacja Monte Carlo
estymacja parametrów
Pokaż więcej
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Powiązania:
https://bibliotekanauki.pl/articles/300717.pdf  Link otwiera się w nowym oknie
Opis:
This paper describes the unknown parameter and reliability function of the Weibull distribution based on hierarchical Bayesian model for the progressively Type-II censored data. The scale parameter of the Weibull distribution is considered with a gamma prior under the shape parameter is known. Furthermore, the scale parameter of the gamma prior is assumed to be three different known hyper prior. Under these assumptions, the Weibull parameter and reliability function estimators are derived based on the squared error loss (SEL) function, which can be easily extended to other loss functions situation. The result from hierarchical Bayesian method is used to compare with Bayes and maximum likelihood estimate (MLE) methods. The simulation shown that the results from Bayes is the best, followed by hierarchical Bayesian method, and then MLE in terms of root mean square error (RMSE). Finally, one real dataset has been analyzed for illustrative purposes.
W prezentowanej pracy opisano metodę estymacji nieznanego parametru oraz funkcji niezawodności rozkładu Weibulla w oparciu o hierarchiczny model Bayesa dla danych uciętych (cenzurowanych) progresywnie typu II. Rozważano parametr skali rozkładu Weibulla o rozkładzie prawdopodobieństwa apriorycznego gamma w sytuacji, gdzie wartość parametru kształtu była znana. Ponadto, przyjęto, że (hiper)parametr skali rozkładu apriorycznego gamma może mieć trzy różne, znane hiper-rozkłady aprioryczne (ang. hyper priors). Przy tych założeniach, estymatory parametru i funkcji niezawodności rozkładu Weibulla wyprowadzono na podstawie kwadratowej funkcji straty (ang. squared error loss, SEL), którą można łatwo rozszerzyć na inne funkcje straty. Wyniki otrzymane z wykorzystaniem hierarchicznej metody Bayesowskiej porównano z wynikami klasycznej estymacji Bayesowskiej oraz estymacji metodą największego prawdopodobieństwa (ang. maximum likelihood estimate, MLE). Symulacja wykazała, że najlepsze wyniki, jeśli chodzi o średnią kwadratową błędów (ang. root mean squared error, RMSE), daje metoda Bayesa, a w dalszej kolejności hierarchiczna metoda Bayesa oraz MLE. W końcowej części pracy rozważane problemy zilustrowano analizując zbiór danych rzeczywistych.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Desensitization by Pre-shocking in Heterogeneous Explosives and its Numerical Modelling
Autorzy:
Hussain, T.
Yan, L.
Fenglei, H.
Yi, L.
Tematy:
shock desensitization
desensitization criterion
ignition and growth
Lee-Tarver model
detonation quenching
reflected shock ignition
EDC
Pokaż więcej
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Powiązania:
https://bibliotekanauki.pl/articles/358221.pdf  Link otwiera się w nowym oknie
Opis:
Desensitization caused by pre-shocking in heterogeneous explosives is discussed. The aim of this study was to find a simple numerical model that could reproduce the important features of previously reported shock desensitization experiments. After reviewing the previous experimental results and modelling efforts, an extension of the Lee-Tarver reactive flow model is proposed. The proposed desensitization model is based upon the experimentally determined desensitization criteria for explosives. The additional parameters required for this extension can be calibrated by experiment for a typical explosive. The new model has been implemented in the hydrodynamic code LS-DYNA as a user defined equation of state, and is now available to simulate various kinds of situations involving explosives up to the limits and capabilities of LS-DYNA. Desensitization by pre-shocking in double shock experiments, reflected shock and detonation quenching experiments have been studied using the new model, and the results were found to be in qualitative agreement with the experimental results reported in the literature.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Activating flotation of chalcopyrite using CuSO4 and H2O2 from the cyanide tailings
Autorzy:
Ai, G.
Yan, H.
Qiu, T.
Liu, C.
Tematy:
cyanide tailings
chalcopyrite
CuSO4
H2O2
activation mechanism
Pokaż więcej
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Powiązania:
https://bibliotekanauki.pl/articles/109562.pdf  Link otwiera się w nowym oknie
Opis:
The effects of CuSO4 and H2O2 on the flotation behavior of cyanide chalcopyrite were investigated by flotation tests, microcalorimetry and X-ray photoelectron spectroscopy (XPS). The underlying activation mechanism was studied in the perspective of micro-thermodynamics and surface properties. The flotation results indicated that cyanide chalcopyrite was strongly inhibited by sodium cyanide, with the maximum flotation recovery of 22.5% only. CuSO4 and H2O2 significantly improved the flotation of cyanide chalcopyrite, and the flotation recovery was increased to 92.28% and 84.35%, respectively. The micro-thermodynamics results indicated that the adsorption heat of butyl xanthate on cyanide chalcopyrite surface increased after the addition of CuSO4 and H2O2, as well as the reaction order. CuSO4 and H2O2 can significantly improve the adsorption of butyl xanthate on the surface of cyanide chalcopyrite by decreasing the apparent activation energy by 80.11% and 66.54%, respectively. XPS analysis indicated that the CuCN was generated on the surface of cyanide chalcopyrite, leading to the loss of sulfur and inhibiting the adsorption of collectors. As a result, the flotation of cyanide chalcopyrite was depressed. It is considered that, CuSO4 and H2O2 can improve the flotation of cyanide chalcopyrite by eleminating CuCN from its surface and increasing the concentration of S by 57.02% and 37.48%, respectively.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research on capacity of mixed vessels traffic flow based on vessel-following theory
Autorzy:
Zhao, C.
Yan, H.
Zhou, G.
Liu, T.
Tematy:
vessel traffic flow
vessel-following theory
vessel traffic
vessel-following sequence
traffic characteristics
follow theoretical analysis diagram
maritime traffic engineering
traffic flow theory
Pokaż więcej
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Powiązania:
https://bibliotekanauki.pl/articles/2211979.pdf  Link otwiera się w nowym oknie
Opis:
In order to study the characteristics of mixed vessel traffic flow, based on classical head distance model and probability analysis, by studying the combination time head way of different vessel-following sequences, the capacity model of mixed vessels traffic flow was established. Through analyzing two representative types of vessels, research results indicate that the capacity of mixed traffic increase with the traffic flow speed in a certain speed range, but the increasing trend slow down. The closer length and inertial stopping distance of different kind vessels are, the more capacity of mixed traffic increases. And the influence of reaction time on the capacity is related to proportion of different kind vessels.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ship domain model for multi-ship collision avoidance decision-making with COLREGs based on artificial potential field
Autorzy:
Wang, T.F.
Yan, X.P.
Wang, Y.
Wu, Q.
Tematy:
ship domain
ship domain model
collision avoidance
colregs
Artificial Potential Field (AFP)
decision-making
Predicted Area of Danger (PAD)
Closest Point of Approach (CPA)
Pokaż więcej
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Powiązania:
https://bibliotekanauki.pl/articles/116475.pdf  Link otwiera się w nowym oknie
Opis:
A multi-ship collision avoidance decision-making and path planning formulation is studied in a distributed way. This paper proposes a complete set of solutions for multi-ship collision avoidance in intelligent navigation, by using a top-to-bottom organization to structure the system. The system is designed with two layers: the collision avoidance decision-making and the path planning. Under the general requirements of the International Regulations for Preventing Collisions at Sea (COLREGs), the performance of distributed path planning decision-making for anti-collision is analyzed for both give-way and stand-on ships situations, including the emergency actions taken by the stand-on ship in case of the give-way ship’s fault of collision avoidance measures. The Artificial Potential Field method(APF) is used for the path planning in details. The developed APF method combined with the model of ship domain takes the target ships’ speed and course in-to account, so that it can judge the moving characteristics of obstacles more accurately. Simulation results indicate that the system proposed can work effectiveness.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Flotation kinetics and thermodynamic behavior of chalcopyrite and pyrite in high alkaline systems
Autorzy:
Yan, H.
Yuan, Q.
Zhou, L.
Qiu, T.
Ai, G.
Tematy:
flotation kinetics
pyrite
chalcopyrite
flotation separation
high alkaline
microcalorimetry
Pokaż więcej
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Powiązania:
https://bibliotekanauki.pl/articles/110078.pdf  Link otwiera się w nowym oknie
Opis:
The monomineral flotation test and microcalorimetry were used to study the flotation kinetics and thermodynamic behavior of chalcopyrite and pyrite in high alkaline systems of lime and NaOH. The results showed that in these systems there were less hydrophilic substances on the chalcopyrite surface, so that the apparent activation energy of sodium butyl xanthate (SBX) adsorption on chalcopyrite surface was low. This promoted the adsorption of SBX and increased the flotation rate and recovery of chalcopyrite. In contrast, the hydrophilic Fe(OH)3 and SO42- formed by oxidation on the pyrite surface increased the adsorption activation energy of SBX. Thus, the flotation rate and recovery of pyrite were lower. Moreover, in the lime high alkaline system, the hydrophilic calcium film generated on the pyrite surface further hindered the adsorption of SBX, thereby further inhibiting pyrite in this environment. In other words, the lime high alkaline environment increased the apparent activation energy difference of SBX adsorption between chalcopyrite and pyrite compared to the NaOH system, facilitating the flotation separation of chalcopyrite and pyrite. The results can help with the theoretical research of flotation separation of other minerals, and provide guidance for developing low alkaline and lime-free pyrite depressants.
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies