Autor: Zubko, A. - Prolib Integro

Skocz do pozycji: 1.

Tytuł:: Prace IPPT IFTR Reports ; 2/2008
Application of the Stabilization Method for Analysis of Geometrically Non-Linear Forced Vibrations of Elastic Beams on Unilateral Winkler Foundation
Autorzy:: Zubko, A.
Bobylov, A.
Współwytwórcy:: Kowalczyk, Piotr Marian. Red.
Kotulski, Zbigniew (1955– ). Red.
Sosnowski, Włodzimierz. Red.
Wydawca:: Instytut Podstawowych Problemów Techniki Polskiej Akademii Nauk
Powiązania:: Prace IPPT IFTR REPORTS
Opis:: Proceedings of the 36th Solid Mechanics Conference, Gdańsk, Poland, September 9-12, 2008
398-399 s.
Rozszerzone streszczenia wykładów konferencyjnych
Extended Abstracts of Conference Lectures
Dostawca treści:: RCIN - Repozytorium Cyfrowe Instytutów Naukowych

Książka

na półce

Skocz do pozycji: 2.

Tytuł:: Solar energy usage for the improvement of the treatment efficiency and operation stability at small-scale wastewater treatment efficiency and operation stability at small-scale wastewater treatment plants
Povyshenye yeffektivnosty y ustoichyvosty raboty malykh kanalyzatsyonnykhochystnykh sopyzhenyi pri yspolzovanyy solnechnoi ienergy
Autorzy:: Epojan, S.
Shtonda, I.
Shtonda, Y.
Zubko, A.
Zvyagintsev, Y.
Wydawca:: Komisja Motoryzacji i Energetyki Rolnictwa
Powiązania:: https://bibliotekanauki.pl/articles/76624.pdf Link otwiera się w nowym oknie
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 3.

Tytuł:: Obezzarazhivanie stochnykh vod na lokal'nym kanalizacionnykh ochistnykh soruzhenijakh pri ispol'zovanii ul'trafioletovogo izluchenija
Desinfection of waste water on the local sewage treatment facilities with use ultraviolet radiaton
Autorzy:: Epojan, S.
Shtonda, I.
Shtonda, Ju.
Shaljapin, S.
Shaljapina, T.
Zubko, A.
Wydawca:: Komisja Motoryzacji i Energetyki Rolnictwa
Powiązania:: https://bibliotekanauki.pl/articles/77741.pdf Link otwiera się w nowym oknie
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 4.

Tytuł:: Ochistka stochnykh vod promyshlennykh predprijatijj ot poverkhnostno-aktivnykh veshhestv
Sewage treatment of industrial enterprises from synthetic surface-active substance
Autorzy:: Ehpojan, S.
Shtonda, J.
Zubko, A.
Shaljapin, S.
Shaljapina, T.
Shtonda, I.
Tematy:: sewage treatment plant
waste water
aeration
carbon
surface-active substance
industrial enterprise
synthetic surface; Pokaż więcej
Wydawca:: Komisja Motoryzacji i Energetyki Rolnictwa
Powiązania:: https://bibliotekanauki.pl/articles/77885.pdf Link otwiera się w nowym oknie
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 5.

Tytuł:: Upravlenue rajevitiem ojedorvitel;noj sredy v sisteme obrajeovanuja vjeroslh
Management procedure of development of the healt-improving environment in the system of adult education
Autorzy:: Lopatik, T.A.
Zubko, T.V.
Wydawca:: Uniwersytet Humanistyczno-Przyrodniczy im. Jana Długosza w Częstochowie. Wydawnictwo Uczelniane
Powiązania:: https://bibliotekanauki.pl/articles/5063.pdf Link otwiera się w nowym oknie
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 6.

Tytuł:: The Rietveld refinement of beryls from pegmatitic system at Piława Górna, Góry Sowie Block, SW Poland
Autorzy:: Zelek-Pogudz, S.
Zubko, M.
Pieczka, A.
Tematy:: 91.65.An; Pokaż więcej
Wydawca:: Polska Akademia Nauk. Instytut Fizyki PAN
Powiązania:: https://bibliotekanauki.pl/articles/1058118.pdf Link otwiera się w nowym oknie
Opis:: The studied beryl crystals came from the Julianna pegmatitic system exposed in the Dolnośląskie Surowce Skalne S.A. quarry at Piława Górna. This mineral occurs here in various forms and colours (green, yellow, white, pinkish and blue) in almost all pegmatite bodies. The paper describes the relationship between the structure and chemical composition of different coloured beryl crystals.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 7.

Tytuł:: Structure characterization of biomedical Ti-Mo-Sn alloy prepared by mechanical alloying method
Autorzy:: Dercz, G.
Matuła, I.
Zubko, M.
Liberska, A.
Tematy:: 81.05.Bx
87.85.J-
81.20.Ev
61.05.cp
68.37.Og; Pokaż więcej
Wydawca:: Polska Akademia Nauk. Instytut Fizyki PAN
Powiązania:: https://bibliotekanauki.pl/articles/1152952.pdf Link otwiera się w nowym oknie
Opis:: The study presents the results of the influence of high energy milling on the structure of the new Ti-15Mo-5Sn [wt%] alloy for biomedical applications. During testing the powders were milled for the following milling times: 5, 15, 30, and 45 h. The milled powders were characterized by X-ray diffraction, scanning and transmission electron microscopy methods. Observation of the powder morphology after various stages of milling leads to the conclusion that with the increase of the milling time the size of the powder particles as well as the degree of aggregation change. However, a clear tendency of particles reduction at every stage of the mechanical alloying process is clearly observed. The X-ray diffraction results confirmed the presence of the α and β phases, and molybdenum. It has been found that the reflections from the Sn phase disappeared after five hours of milling, suggesting that the Sn and Ti alloying took place, leading to the creation of a titanium-based solid solution. After 30 and 45 h of mechanical alloying the formation of the β-Ti phase, the final share of which is 46(4) wt%, was observed. Furthermore, it was found that a diffraction line broadening with the increase of the milling time results from reduction of the crystallite size and an increase in the lattice distortion. The maximum level of the reduction of the crystallite size was obtained after 45 h of milling. The maximum degree of the unit cells reduction for all phases present in the powder that was being milled was also observed for this milling time.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 8.

Tytuł:: Magnetic hardening induced in RCo₅ (R = Y, Gd, Sm) by short HEBM
Autorzy:: Łopadczak, P.
Bajorek, A.
Prusik, K.
Zubko, M.
Chełkowska, G.
Tematy:: 81.07.-b
81.07.Bc
75.50.Ww
75.60.-d
75.75.Cd; Pokaż więcej
Wydawca:: Polska Akademia Nauk. Instytut Fizyki PAN
Powiązania:: https://bibliotekanauki.pl/articles/1048324.pdf Link otwiera się w nowym oknie
Opis:: The paper is focused on the magnetic and structural properties of RCo₅ (R = Y, Gd, Sm) intermetallics fabricated by high energy ball - milling (HEBM). The investigated samples were first produced by arc-melting as bulk materials and then were milled for 1h in dimethylformamide with balls to powder ratio 10:1. The influence of the HEBM parameters on the microstructure was investigated by a variety of complementary measurement methods. The Rietveld refinement was performed to estimate the dependence of crystallite size and microstrain on type of sample. The hysteresis loops were recorded by SQUID magnetometer at 2 K and 300 K and at magnetic field up to μ₀H=7 T. The impact of short HEBM process is visible as the enhancement of coercivity and simultaneous reduction of the saturation magnetization.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 9.

Tytuł:: Effect of the boron addition on the structure of the Ni-Mn-Co-In alloys
Autorzy:: Prusik, K.
Matyja, E.
Zubko, M.
Kubisztal, M.
Chrobak, A.
Tematy:: 71.20.Lp
71.20.Be; Pokaż więcej
Wydawca:: Polska Akademia Nauk. Instytut Fizyki PAN
Powiązania:: https://bibliotekanauki.pl/articles/1153865.pdf Link otwiera się w nowym oknie
Opis:: Series of Ni_{45.5-x}Co_{4.5}Mn_{36.6}In_{13.4}B_{x} (at.%, x=0, 0.05, 0.1, 0.5, 1.0) polycrystalline magnetic shape memory alloys produced by the induction melting were examined in terms of the structure and transition temperatures. The structure of the alloys was determined by the X-ray diffraction and transmission electron microscopy. Scanning electron microscopy and electron backscattering diffraction techniques were applied to obtain the microstructure and texture of alloys. Boron addition promotes nucleation of the second Co-rich and In-poor phase as well as causes decrease of the martensitic transformation temperatures.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 10.

Tytuł:: Analysis of CMSX-4 single-crystalline turbine blades root by electron and X-ray diffraction methods
Autorzy:: Krawczyk, J.
Zubko, M.
Bogdanowicz, W.
Tondos, A.
Sieniawski, J.
Tematy:: 81.10.Aj
61.72.Ff
61.05.J-; Pokaż więcej
Wydawca:: Polska Akademia Nauk. Instytut Fizyki PAN
Powiązania:: https://bibliotekanauki.pl/articles/1058074.pdf Link otwiera się w nowym oknie
Opis:: The root of single-crystalline turbine blade made of CMSX-4 superalloy were studied. The studied blade was produced by the Bridgman technique in industrial ALD furnace at withdrawal rate of 3 mm/min. The samples for investigations were cut from the blade root parallel to the withdrawal direction. Metallographic sections of longitudinal samples planes were prepared for further investigations. The samples were analysed using scanning electron microscopy and the Laue diffraction studies. The crystal orientations in macro-scale were determined by analysis of the Laue pattern and local crystal orientations were studied by electron backscattered diffraction technique. Morphology of dendrites were examined by analysis of scanning electron microscopy macro-images. Study of subgrain structure was performed by X-ray diffraction topography. The sharp parallel contrast bands, visible on the X-ray topograms, were related with dendrite cores, arranged with the same direction. Additionally, the low angle boundaries were formed in certain samples, visible on the topograms as contrast shifts. Step changes of local crystal orientation in certain areas were observed on the electron backscattered diffraction maps. The electron backscattered diffraction crystal orientation maps were related to the misorientation visualized in topograms.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Informacja

Wyszukujesz frazę "Zubko, A." wg kryterium: Autor