Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "aerogel" wg kryterium: Temat


Tytuł:
Collection of mobile dust in the T2R reversed field pinch
Autorzy:
Bykov, I.
Bergsaker, H.
Ogata, D.
Petersson, P.
Ratynskaia, S.
Tematy:
aerogel
dust
collection
Pokaż więcej
Wydawca:
Instytut Chemii i Techniki Jądrowej
Powiązania:
https://bibliotekanauki.pl/articles/147698.pdf  Link otwiera się w nowym oknie
Opis:
Intensive plasma-wall interactions in fusion devices result in the impurity production and the formation of films of redeposited material, debris and dust. In present day devices, with short pulses, the mobile dust does not pose any serious operational problems, but it is a matter of serious concern for ITER and for later power producing devices with a high duty cycle. We report results of a dust collection experiment carried out at the T2R reversed field pinch device and related heavy impurity flux measurements. Dust and impurities were collected on passive Si surface probes and on ultralow density silica aerogel collectors. The advantage of the latter method is the possibility of nondestructive capture of the micron- and submicron-sized dust particles. The toroidal and radial deposition fluxes of dust particles and impurities are estimated and discussed in the light of the dominant forces acting on the dust.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Manganese oxide based aerogels
Autorzy:
Rudnicka, Małgorzata
Łata, Joanna
Kupracz, Piotr
Tematy:
aerogel
cobalt
manganese
nickel
supercritical drying
Pokaż więcej
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Powiązania:
https://bibliotekanauki.pl/articles/1161877.pdf  Link otwiera się w nowym oknie
Opis:
High purity inorganic aerogels synthetized during sol-gel process show considerable potential for large-scale production. Cobalt-manganese oxides, manganese-nickel oxides and cobalt-manganese-nickel oxides aerogels were obtained during gelation process of transition metal salts. All samples were dried in supercritical conditions. Their specific surface was obtained using both Brunauer-Emmet-Teller and Langmuir methods. Moreover, images received from SEM helped to confirm porous structure.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of Aging Factors on the Properties of Aerogels with Different Degrees of Granulation
Wpływ czynników starzeniowych na właściwości aerożeli o zróżnicowanym stopniu uziarnienia
Autorzy:
Greszta, Agnieszka
Krzemińska, Sylwia
Okrasa, Małgorzata
Tematy:
aerogel
exposure to humidity
exposure to heat
aerogel surface area
aerogel porosity
aerożel
narażenie na wilgoć
narażenie na ciepło
powierzchnia aerożelu
porowatość aerożelu
Pokaż więcej
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Powiązania:
https://bibliotekanauki.pl/articles/232849.pdf  Link otwiera się w nowym oknie
Opis:
Aerogels are distinguished by their low density and thermal conductivity, which predisposes them for application in materials against extremely low or high temperature. Aerogel resistance to aging factors such as moisture, high temperature and thermal radiation was studied. Aerogel resistance to moisture absorption was studied by the weight method, at a relative humidity of 65% and 95%. For aerogels exposed to heat (at 260 °C) and thermal radiation (heat flux density 20 kW/m2), structural and textural characteristics (specific surface area, pore volume, pore size distribution) were determined. It was found that in an environment characterised by 95% humidity, the moisture weight absorbed was similar for all aerogels and amounted to less than 1%, corresponding to low moisture absorption capacity. The most significant changes in specific surface area were recorded for aerogels in powder form, where the value of this parameter after exposure to high temperature increased by 13% compared to the reference sample. An increase in the specific surface area can effect a reduction in thermal conductivity; thus this change is positive in character in the context of application to clothing designed against thermal factors.
Aerożele wyróżniają się małą gęstością i przewodnością cieplną, co predysponuje je do zastosowania w materiałach chroniących przed skrajnie niską lub wysoką temperaturą. W pracy zbadano odporność aerożeli na czynniki starzeniowe takie jak: wilgoć, wysoka temperatura i promieniowanie cieplne. Odporność aerożeli na wchłanianie wilgoci badano metodą wagową, przy wilgotności względnej 65% i 95%. Dla aerożeli poddanych ekspozycji na ciepło (w temp. 260 °C) i promieniowanie cieplne (przy gęstości strumienia ciepła 20 kW/m2) wyznaczono cechy strukturalne i teksturalne (powierzchnia właściwa, objętość porów, rozkład wielkości porów). Stwierdzono, że w środowisku charakteryzującym się 95% wilgotnością, zdolność pochłaniania wilgoci była zbliżona dla wszystkich aerożeli i wynosiła poniżej 1%. Największe zmiany powierzchni właściwej odnotowano w przypadku aerożelu w postaci proszku, gdzie wartość tego parametru po działaniu wysokiej temperatury wzrosła o 13% względem próbki odniesienia. Stwierdzono, że zwiększenie powierzchni właściwej może wpływać na zmniejszenie przewodności cieplnej, a więc zmiana ta ma pozytywny charakter w kontekście aplikacji do odzieży chroniącej przed czynnikami gorącymi.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fabrication of Agar-Silica Aerogel Nanocomposite Films
Autorzy:
Lee, Min-Jin
Jung, Hyun-Ah
Lee, Kyong-Jin
Hwang, Haejin
Tematy:
thermal insulation film
silica aerogel
agar
thermal conductivity
transmittance
Pokaż więcej
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Powiązania:
https://bibliotekanauki.pl/articles/356287.pdf  Link otwiera się w nowym oknie
Opis:
In this study, agar-based nanocomposite films containing ultra-porous silica aerogel particles were fabricated by gel casting using an aqueous agar/silica aerogel slurry. The silica aerogel particles did not show significant agglomeration and were homogeneously distributed in the agar matrix. Transmission electron microscopy observations demonstrated that the silica aerogel particles had a mesoporous microstructure and their pores were not incorporated into the agar polymer molecules. The thermal conductivities of the agar and agar/5wt.% silica aerogel nanocomposite films were 0.36 and 0.20 W·m-1·K-1, respectively. The transmittance of the agar films did not decrease upon the addition of silica aerogel particles into them. This can be attributed to the anti-reflection effect of silica aerogel particles.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fabrication of Silver-Impregnated Silica Aerogel Composite for Energy Applications
Autorzy:
Kapadnis, Pratik S.
Kim, Kyungsun
Park, Hyung-Ho
Hwang, Haejin
Tematy:
silver nanoparticle
silica aerogel
polyvinylpyrrolidone
impregnation
composite material
Pokaż więcej
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Powiązania:
https://bibliotekanauki.pl/articles/59110917.pdf  Link otwiera się w nowym oknie
Opis:
In this study, Ag-impregnated silica aerogel composites were fabricated via wet impregnation. In this approach, silver salt was reduced with ethylene glycol in the presence of polyvinylpyrrolidone (PVP) at reaction temperature 80°C. PVP was used as a capping agent to protect the Ag nanoparticles (NPs) from agglomeration. Wet impregnation was used to synthesize the Ag/SiO2 composite by combining the reduction of AgNO3 with a silica aerogel slurry. Experimental results showed that the AgNO3 concentration and PVP: AgNO3 ratio had an active influence on the growth of Ag NPs on silica surfaces. The X-ray diffraction (XRD) patterns of the composite material showed no imprints of impurities or parasitic materials except for Ag and SiO2. Scanning electron microscopy (SEM) images revealed that the Ag NPs were well impregnated into the porous silica aerogel structure. It was found that SiO2 aerogel surfaces were homogeneously surrounded by the Ag NPs.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Biomimetic Fe–Cu Prophyrrole Aerogel Electrocatalyst for Oxygen Reduction Reaction
Autorzy:
Zion, Noam
Friedman, Ariel
Reddy, Samala Nagaprasad
Honig, Hilah C.
Persky, Yeela
Gryko, Daniel T.
Zachman, Michael J.
Grinberg, Ilya
Elbaz, Lior
Kielesiński, Łukasz
Koszarna, Beata
Wydawca:
American Chemical Society
Cytata wydawnicza:
ACS Catal. 2023,13, 11012−11022 ; https://doi.org/10.1021/acscatal.3c01972
Opis:
The development of bioinspired catalysts for oxygen reduction reaction is one of the most prominent pathways in the search for active materials to replace Pt-based catalysts in fuel cells. Herein, we report innovative bioinspired catalysts using a directed synthetic pathway to create adjacent Cu and Fe sites. This catalyst is composed of a covalent 3D framework in an aerogel form. Aerogels are high surface area and porous hierarchical structures that can allow the formation of ultrahigh active site density and optimized mass transport of reactants and products to and from the catalytic sites. The aerogel-based catalyst exhibits high performance in a half-cell in 0.1 M KOH, with an onset potential of 0.94 V vs RHE and half-wave potential of E1/2 = 0.80 V vs RHE, high selectivity toward the four-electron reduction of oxygen to hydroxide anions, and high durability. These results are well-translated to the anion exchange membrane fuel cell (AEMFC), reaching an open circuit potential of 0.97 V and iR-corrected peak power density of 0.51 W cm–2. Based on density functional theory calculations, the improved activity relative to the Fe-porphyrin and Cu-corrole is ascribed to the effect of the extended carbon network and the proximity of the metal sites.
Israeli Ministry of Science and Technology; Israeli Ministry of Energy; Israel Science Foundation; Israeli Smart Transportation Research Center (ISTRC); Polish National Science Center (HARMONIA 2018/30/M/ST5/00460); Center for Nanophase Materials Sciences (CNMS), which is a U.S. Department of Energy, Office of Science User Facility at Oak Ridge National Laboratory.
Dostawca treści:
Repozytorium Centrum Otwartej Nauki
Artykuł
Tytuł:
Effects of different grain size of expanded perlite aggregate and content of silica aerogel on the characteristics of lightweight cementitious composite
Autorzy:
Vashchuk, Andrii
Ślosarczyk, Agnieszka
Tematy:
lightweight composite
expanded perlite aggregate
silica aerogel
mechanical characteristic
thermal conductivity coefficient
scanning electron microscopy
Pokaż więcej
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Powiązania:
https://bibliotekanauki.pl/articles/24085741.pdf  Link otwiera się w nowym oknie
Opis:
In this research, an attempt was made to investigate effects of expanded perlite aggregate grain size on consistency, density, compressive strength, thermal conductivity and microstructure of 15 different composite mixes with silica aerogel. As for the samples preparation, expanded perlite aggregate of 5 different groups based on grain size, were used for sample preparation, then partially replaced by volume for 20% and 40% of hydrophobic silica aerogel particles. The results showed, that density of the samples varied between 0.35 g/cm3 and 1.5 g/cm3, flexural strength varied between 3.4 MPa and 7.4 MPa, compressive strength was in the range between 12.3 MPa and 55 MPa, thermal conductivity coefficient was in the range between 0.130 W/mK and 0.190 W/mK. Scanning electron microscopy showed that expanded perlite aggregates and silica aerogel particles are capable of being mixed and formed homogenous mixture. Nevertheless, microscope images indicated weaker adhesion of silica aerogel particles at interfacial zone as compared with expanded perlite aggregate particles. Results revealed, that both of the factors: grain size of expanded perlite aggregate particles silica aerogel content influenced the density, compressive strength and thermal conductivity. The study also indicated feasibility of expanded perlite aggregate and silica aerogel for achieving homogeneous mixture of the lightweight cementitious composites. Study demonstrated that using different size fractions of expanded perlite aggregate affects differently physical, mechanical and thermal characteristics of the lightweight cementitious composite with silica aerogel.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Aerożele węglowe otrzymywane z prekursora rezorcynowo-furfuralowego
Carbon aerogels obtained from resorcinol-furfural precursors
Autorzy:
Kiciński, W.
Tematy:
synteza zol-żel
aerożel węglowy
aerożel koloidalny
polikondensacja
sol-gel synthesis
carbon aerogel
colloidal structure
polycondensation
Pokaż więcej
Wydawca:
Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Powiązania:
https://bibliotekanauki.pl/articles/209295.pdf  Link otwiera się w nowym oknie
Opis:
Przedstawiono nową metodę otrzymywania aerożeli węglowych poprzez karbonizację organicznych aerożeli rezorcynowo-furfuralowych. Żele rezorcynowo-furfuralowe otrzymywano w wyniku katalizowanej kwasowo kondensacji rezorcyny i furfuralu prowadzonej w wodno-metanolowym roztworze soli nieorganicznych. Następnie sól z sieci żelu wymywano i oczyszczony materiał suszono. Suszenie tradycyjnymi metodami nie prowadziło do zniszczenia struktury porowatej żelu dzięki czemu możliwe było uzyskanie aerożeli organicznych bez konieczności stosowania warunków nadkrytycznych ekstrakcji rozpuszczalnika ze struktury żelu. Karbonizacja aerożeli organicznych pozwalała uzyskać mikro-makroporowate lub mikro-mezo-makroporowate materiały węglowe o strukturze mikropianek i powierzchni właściwej z przedziału 250-580 m²/g. Otrzymane aerożele organiczne i węglowe badano przy użyciu wielu technik, m.in. SEM, XRD, niskotemperaturowej adsorpcji azotu, analizy termograwimetrycznej i elementarnej.
Acidic condensation of resorcinol with furfural carried out in water-methanol solution of inorganic salts (NaCl or NH₄ClO₄) leads to organic R-F gel. After removing the salt from the gel network, the purified gel can be dried under ambient conditions without significant shrinkage, so the supercritical drying can be avoided, and an organic aerogel can be obtained through a simpler procedure. By changing the H₂O/MeOH ratio and/or the inorganic salt amount, the structure of the created gel can be controlled in the nano and micron-level and as a result polymeric (nano-sized) or colloidal (micron-sized) aerogels can be produced. Carbonization of the colloidal aerogels yields bimodal micro-macroporous carbonaceous materials with the structure of microfoam and low density, while carbonization of the polymeric ones yields bimodal, micro and meso-macroporous carbonaceous materials with high density and mechanical strength. Specific surface area of the carbon aerogels ranged from 250 to 580 m²/g. The obtained organic and carbon aerogels were investigated by the means of SEM, XRD, elemental analysis, N₂ adsorption, and TG.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Testing the thermal properties of the insulating structures of a flight data recorder
Autorzy:
Panas, Andrzej J.
Szczepaniak, Robert
Krupińska, Anna
Łęczycki, Krzysztof
Nowakowski, Mirosław
Tematy:
aerogel insulating structures
thermal physical properties
thermal diffusivity
Smoluchowski–Knudsen effect
complex thermal analysis
ablation
Pokaż więcej
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Powiązania:
https://bibliotekanauki.pl/articles/58907264.pdf  Link otwiera się w nowym oknie
Opis:
This paper deals with the problems faced during the research on the insulating structures used in the thermal shielding of flight recorders. These structures are characterised by specific properties determined by, among other aspects, their porosity. The complex and coupled heat-exchange phenomena occurring under the operating conditions of the recorders, and in numerous cases combined with mass exchange, require dedicated test methods. The paper characterises the origin of the research problem, presents a methodology for comprehensive testing of the thermal propertiesand uses the example of determining the insulating properties of the Promalight microporous structure ®-1000R. The authors focussed on thermal diffusivity tests performed by means of the oscillatory excitation method. The measurements were conducted on a test stand to determine the effect the type of gas filling had on the porous structure and the pore filling gaspressure effect on the temperature characteristics of apparent thermal diffusivity. The authors also conducted research on the structure’s resistance to direct flame exposure. The analysis of the obtained results enable recognition and characterisation of the key phenomena of heat and mass transfer; the numerical results exert a significant influence on their application.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preparatyka nanostrukturalnych elektrod karbożelowych
Nanostructured carbogel electrodes derived from starch
Autorzy:
Borowiec, Ewelina
Opis:
With the advancement of technology (development of electronic devices, electric or hybrid vehicles), a significant increase in demand for energy has been observed. This resulted in the emergence of energy storage systems (ESS) which have led to the use of renewable energy sources and at the same time reduction of energy production costs, minimization of the environmental degradation [1].Nowadays, most commonly used electrochemical energy storage systems are Li-ion batteries because of their high energy density and supercapacitors due to their high power density and long cyclic life.The main objective was the preparation of nanostructured carbogel electrodes. The next target was use cheap and readily materials such as starch to applied in energy storage systems.In the present study, carbon aerogels based on natural starches of different botanical origin (potato, corn and rice). Carbon aerogels were prepared by the polycondensation and carbonization process. We can distinguish four step of the fabrication of these materials: gelatinization process, solvent exchange, drying and carbonization. The crystal structure, textural properties and elemental composition of the starch-based carbon aerogels were investigated by X-ray powder diffraction (XRD), low-temperature nitrogen adsorption–desorption (N2-BET), elemental analysis (EA) and scanning electron microscope (SEM). The resulting carbon aerogels were used for electrode preparation. By atomic force microscopy examined how the carob materials cover the Cu plate. The carbogel electodes were used in supercapacitors and lithium ion batteries. The electrical properties of the obtained aerogels were examined by Cell Test and cyclic voltammetry (CV).The prepared carbon materials provide high surface area and good electrical properties.In sum, starch is very attractive and promising renewable plant polysaccharide that can be used as a precursor for carbon materials which will be applied in energy storage systems.[1] M. Bakierska, M. Molenda, D. Majda, R. Dziembaj, Procedia Eng., 2014, 98, 14-19.
Zapotrzebowanie na energię elektryczną stale rośnie, a wzrost ten determinowany jest przez dynamiczny rozwój urządzeń mobilnych, samochodów elektrycznych, czy systemów zasilania awaryjnego. Z uwagi jednak na wysokie koszty wytwarzania energii elektrycznej (spowodowane m.in. wyczerpywaniem surowców kopalnych), jak również kwestie środowiskowe, zaczęto intensyfikować działania zmierzające do wykorzystania odnawialnych źródeł energii, a także wprowadzenia nowych rozwiązań w systemach jej magazynowania. Celem pracy było otrzymanie nanostrukturalnych materiałów karbożelowych na bazie taniej i nietoksycznej skrobi oraz przeprowadzenie analizy fizyko- i elektrochemicznej pod kątem zastosowania karbożeli jako materiałów elektrodowych w elektrochemicznych układach magazynowania energii (akumulatorach Li-ion oraz superkondensatorach).Materiały karbożelowe otrzymano z trzech rodzajów skrobi naturalnej (ziemniaczanej, kukurydzianej i ryżowej) wykorzystując proces kleikowania. Preparatyka tych materiałów odbywała się w kilku etapach. Po podgrzaniu wodnego roztworu skrobi, przeprowadzono starzenie i wymianę rozpuszczalnika otrzymując alkożele. Następnie w wyniku suszenia alkożele przeprowadzono do aerożeli organicznych, które to z kolei na skutek pirolizy zostały zwęglone [1]. W ramach prowadzonych prac dokonano również optymalizacji stężeń roztworu skrobi w wodzie destylowanej. Strukturę, powierzchnię właściwą oraz skład chemiczny karbożeli wyznaczono metodami rentgenowskiej dyfrakcji proszkowej (XRD), niskotemperaturowej sorpcji azotu (N2-BET) oraz analizy elementarnej (EA). Otrzymane materiały węglowe wykorzystano kolejno do preparatyki elektrod. Przygotowano gęstwę zawierającą materiał aktywny (karbożel), dodatek przewodzący oraz spoiwo polimerowe i naniesiono ją na płytkę miedzianą. Sposób nanoszenia materiału zbadano za pomocą mikroskopii sił atomowych (AFM). Otrzymane elektrody karbożelowe badano w akumulatorach Li-ion i superkondensatorach. Właściwości transportowe i elektrochemiczne wyznaczono na podstawie testów ładowania/rozładowania (CELL TEST) oraz woltamperometrii cyklicznej (CV). Otrzymane materiały karbożelowe wykazały dużą powierzchnię właściwą oraz pojemność, co świadczy o tym, że skrobia może zostać wykorzystana jako odnawialny surowiec do magazynowania energii elektrycznej.[1] M. Bakierska, M. Molenda, D. Majda, R. Dziembaj, Procedia Eng., 2014, 98, 14-19.
Dostawca treści:
Repozytorium Uniwersytetu Jagiellońskiego
Inne

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies