Temat: anode - Prolib Integro

Skocz do pozycji: 1.

Tytuł:: Następna generacja baterii trakcyjnych o zwiększonej gęstości energii
The next generation of traction batteries with increased energy density
Autorzy:: Kwiatkowski, Maciej
Kras, Bartłomiej
Tematy:: LEO 300
silicon rich anode
ICPT
anoda krzemowa
silicon anode; Pokaż więcej
Wydawca:: Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Powiązania:: https://bibliotekanauki.pl/articles/2056409.pdf Link otwiera się w nowym oknie
Opis:: Autorzy przestawiają projekt, którego celem jest opracowanie, wykonanie i wdrożenie nowej generacji modułu bateryjnego o bardzo wysokiej gęstości energii. Nowa generacja akumulatorów trakcyjnych, opartą na nowym module pozwoli na wprowadzenie do służby pojazdów autobusowych o zwiększonym zasięgu operacyjnym oraz ilości zabieranych pasażerów.
The authors present a project aimed at developing, manufacturing and implementing a new generation battery module with a very high energy density. The new generation of traction batteries, based on the new module, will allow the introduction of bus vehicles with an increased operating range and the number of passengers taken into service.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 2.

Tytuł:: Następna generacja baterii trakcyjnych o zwiększonej gęstości energii
Autorzy:: Kwiatkowski, Maciej
Kras, Bartłomiej
Tematy:: akumulatory trakcyjne
LEO 300
silicon rich anode
ICPT
anoda krzemowa
traction batteries
silicon anode; Pokaż więcej
Wydawca:: Wydawnictwo Druk-Art
Powiązania:: https://bibliotekanauki.pl/articles/20726758.pdf Link otwiera się w nowym oknie
Opis:: Autorzy przestawiają projekt, którego celem jest opracowanie, wykonanie i wdrożenie nowej generacji modułu bateryjnego o bardzo wysokiej gęstości energii. Nowa generacja akumulatorów trakcyjnych, opartą na nowym module pozwoli na wprowadzenie do służby pojazdów autobusowych o zwiększonym zasięgu operacyjnym oraz ilości zabieranych pasażerów.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 3.

Tytuł:: Evaluating the Effect of the Approaching Electrode on the Migration for Metal Ions through the Electro-Kinetic Technique for Contaminated Soil
Autorzy:: Thamer, Zeina
Khalil, Amal H.
Tematy:: zinc
electrokinetic
remediation
approached anode; Pokaż więcej
Wydawca:: Polskie Towarzystwo Inżynierii Ekologicznej
Powiązania:: https://bibliotekanauki.pl/articles/2202378.pdf Link otwiera się w nowym oknie
Opis:: In this study, three experiments using the fixed anode technique and approached anode technique were carried out. The first experiment (EK-1) used distilled water as leaching solution (purging solution) at the anode and cathode chamber under voltage gradient was equal to 1.5 V/cm. In the second and third experiments, a solution enhanced with 1M acetic acid (AA) was used as catholic solution. The results indicate that residual concentration of Zn+2 decreases, beginning with an initial value of 850 mg/kg in all portions of soil sample EK-1, EK-2, in addition to EK-3. It seems that the residual concentration of EK-3 (approached anode technique) was lower than that of EK-1 and EK-2 in identical portions.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 4.

Tytuł:: Electrochemical Purification of Oil-Containing Shipping Waters
Autorzy:: Vozniuk, Marta
Shabliy, Tetyana
Gomelya, Mykola
Sirenko, Ludmila
Sidorov, Dmytro
Tematy:: oil-containing water
bilge water
electrocoagulation
ship wastewater
electrolysis
aluminum anode
iron anode; Pokaż więcej
Wydawca:: Polskie Towarzystwo Inżynierii Ekologicznej
Powiązania:: https://bibliotekanauki.pl/articles/27323824.pdf Link otwiera się w nowym oknie
Opis:: The article describes the modern problems of formation and purification of marine oil-containing waters. The efficiency of using electrocoagulation to remove oil from water-oil emulsions of different mineralization using aluminum and iron anodes was studied. Treatment of water-oil solutions with an oil content of 100 mg/dm3 by electrocoagulation in a single-chamber electrolyzer provides 98–99% oil removal using these electrodes at an anode current density of 0.57–2.11 A/dm2 for highly mineralized waters and 0.34 A/dm2 for freshwater treatment during the first 15 minutes provides a reduction in oil concentration from 100 mg/dm3 to values at the level of 1.55–2.93 mg/dm3. When the water treatment time is extended to 45 minutes, greater efficiency in highly mineralized waters is provided by the aluminum anode.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 5.

Tytuł:: Effect of RF Magnetron Sputtered Nickel Oxide Thin Films as an Anode Buffer Layer in a P₃HT:PCBM Bulk Hetero-Junction Solar Cells
Autorzy:: Kim, Jwayeon
Ko, Yongkyu
Park, Kyeongsoon
Tematy:: P₃HT:PCBM bulk heterojunction solar cell NiO anode buffer layer
PEDOT:PSS anode buffer layer; Pokaż więcej
Wydawca:: Polska Akademia Nauk. Instytut Fizyki PAN
Powiązania:: https://bibliotekanauki.pl/articles/1031015.pdf Link otwiera się w nowym oknie
Opis:: Bulk heterojunction solar cells were investigated using poly(3-hexylthiophene) (P₃HT):[6,6]-phenyl-C₆₁ butyric acid methyl ester (PCBM) with a nickel oxide (NiO) anode buffer layer between the photoactive layer and an indium tin oxide (ITO) anode layer. The NiO anode buffer layer was deposited using radio frequency magnetron sputtering on an ITO electrode layer for effective hole transport and electron blocking. The NiO film is a p-type semiconductor with resistivity of 0.35 Ω cm. The power conversion efficiency was improved substantially by the NiO anode buffer layer compared to a solar cell with an anode buffer layer made from poly(3,4-ethylenedioxythiophene) (PEDOT):poly(styrene sulfonate) (PSS). The solar cell with a 10 nm thick NiO anode buffer layer had a power conversion efficiency of 4.71%. These results are explained by the improved charge transport across the interface between the active layer and ITO electrode.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 6.

Tytuł:: Characterisation of a graphene/NPB structure with Re2O7 as an interfacial layer for OLED application
Autorzy:: Krukowski, Paweł
Piskorski, Michał
Rogala, Maciej
Dąbrowski, Paweł
Lutsyk, Iaroslav
Kozłowski, Witold
Kowalczyk, Dorota Anna
Krempiński, Patryk
Ster, Maxime Le
Nadolska, Aleksandra
Toczek, Klaudia
Przybysz, Przemysław
Dunal, Rafał
Ryś, Wojciech
Sarkar, Shankhanil
Łuszczyńska, Beata
Kowalczyk, Paweł J.
Tematy:: graphene
rhenium oxide
NPB
anode; Pokaż więcej
Wydawca:: Polska Akademia Nauk. Stowarzyszenie Elektryków Polskich
Powiązania:: https://bibliotekanauki.pl/articles/59112903.pdf Link otwiera się w nowym oknie
Opis:: A graphene/NPB structure with Re₂O₇ as an interfacial layer in the context of its potential use in the design of an organic light-emitting diode (OLED) is investigated. The X-ray photoelectron spectroscopy (XPS) study shows the formation of the Re₂O₇ phase on a monolayer graphene on quartz during thermal deposition in ultra-high vacuum (UHV). The ultraviolet photoelectron spectroscopy (UPS) study shows an enhancement of the work function of the graphene heterostructure after deposition of the Re₂O₇ layer up to 5.4 eV. The hole injection barrier between the Re₂O₇/graphene heterostructure and the N-bis-(1- naphthyl)-N,N-diphenyl-(1,1-biphenyl)-4,4-diamine (NPB) layer was estimated to be 0.35 eV, which is very promising for a good OLED performance.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 7.

Tytuł:: Development of characterization methods for adherent anode slimes in copper electrorefining
Autorzy:: Kiviluoma, M.
Aaltonen, M.
Aromaa, J.
Lundstrom, M.
Forsen, O.
Tematy:: anode
slime
copper
electrorefining
nickel
lead
arsenic; Pokaż więcej
Wydawca:: Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Powiązania:: https://bibliotekanauki.pl/articles/110440.pdf Link otwiera się w nowym oknie
Opis:: Adherent anode slimes can cause anode passivation in copper electrorefining and lower the efficiency of copper electrorefining. Declining concentrate grades cause larger impurity levels in anodes, thus creating larger quantities of slimes in the refining process. In order to investigate the characterization methods for adherent anode slimes in copper electrorefining, experiments were conducted for the Boliden Harjavalta Pori refinery material. Methods such as particle size determination, chemical (ICP) analysis, settling rate determination, XRD, SEM-SE, SEM-BSE and SEM-EDS were applied. In addition, adherent anode slime samples were compared to optical micrograph and SEM-BSE images of respective anode copper samples. It was shown that SEM-EDS and SEM-BSE provided precise information about phases formed during electrorefining. The settling rate and particle size had a correlation only with a copper content of anode slime. The main phases in the anode slime were copper and lead sulphates as well as copper-silver selenides. NiO was shown to be the major Ni-bearing phase in the adherent slime. Nickel, tellurium and lead had the strongest, whereas arsenic, selenium and antimony had the weakest tendency to report to the anode slime.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 8.

Tytuł:: Detachment and flow behaviour of anode slimes in high nickel copper electrorefining
Autorzy:: Sahlman, Mika
Aromaa, Jari
Lundström, Mari
Tematy:: copper
electrorefining
anode slime
nickel
oxygen; Pokaż więcej
Wydawca:: Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Powiązania:: https://bibliotekanauki.pl/articles/58971211.pdf Link otwiera się w nowym oknie
Opis:: Most of the world’s copper is produced via copper electrorefining, where nickel is the most abundant impurity in the process. Previously it has been suggested that nickel affects the adhesion of anode slimes on the anode as well as the porosity of the slime layer that forms. This paper investigates the effects of nickel, oxygen, sulphuric acid and temperature on the detachment of anode slimes from the anode surface. The detachment of particles as a function of both anode and electrolyte composition was studied on laboratory scale using a camera connected to a Raspberry Pi, and particle detection and movement analysed using TrackPy. The results revealed four different slime detachment mechanisms: cloud formation, individual particle detachment, cluster detachment and avalanche. These were found to be dependent on the electrolyte (0, 10, 20, 30 g/dm3 Ni2+ & 100, 200 g/dm3 H2SO4), with increasing nickel concentration promoting cluster detachment and increasing sulphuric acid concentration favouring detachment of individual particles. Anode composition (0.05-0.44 wt% O and 0.07-0.64 wt% Ni) was shown to affect the flow direction of anode slimes, with increasing nickel leading to more upward-flowing slimes. Typical particle movement velocities were from -0.5 to 1.0 mm/s regardless of the electrolyte and anode composition, and regardless of the operating temperature (25 °C & 60 °C) for small particles (<0.5 mm). The results also support previous findings that increasing the nickel concentration of the electrolyte leads to a more porous anode slime layer on the anode.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 9.

Tytuł:: Numerical Modeling of Copper Reduction in Fire Refining Process
Autorzy:: Kolczyk, E.
Miczkowski, Z.
Czernecki, J.
Tematy:: numerical modelling
copper reduction
anode furnace
tuyere; Pokaż więcej
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Powiązania:: https://bibliotekanauki.pl/articles/354138.pdf Link otwiera się w nowym oknie
Opis:: Copper reduction represents one of the steps in the process of fire refining of blister copper. Process of copper reduction with natural gas as performed in the anode furnace was modeled. Numerical analysis was conducted using the IPSA (Inter- Phase-Slip Algorithm) module of PHOENICS package and standard turbulent model k - ε. The model takes into account the liquid phase - slag and phase of natural gas which is supplied through the tuyere from the bottom of the charge. Calculations were made for two different diameters of tuyeres for supply of reducer. Based on the calculations and analysis, it was found out that the gas flow which causes strong movement in the bath guarantees homogeneous composition of the liquid copper in each process stage. Application of a tuyere with a larger diameter results in a greater intensity of the reduction process and better use of the reducer.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 10.

Tytuł:: Li-S battery recycling
Autorzy:: Siczek, Krzysztof
Tematy:: lithium-sulfur battery
recycling
anode
cathode
electrolyte; Pokaż więcej
Wydawca:: Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Powiązania:: https://bibliotekanauki.pl/articles/409532.pdf Link otwiera się w nowym oknie
Opis:: Lithium-ion batteries are not situable for electric vehicles with high millage, military power supplies and fixed power networks. Therefore, the Li-S batteries have been intensively investigated, due to the high capacity, low cost, widespread source, and nontoxicity. The development of Li-S batteries causes increasing need to find the methods for their recycling. Some of them are discussed in the paper. The recycling of Li-S cell relates to its anode, cathode, electrolyte, binder and separator. The Li-S battery should be fully charged before recycling. There are potential methods for recycling of lithium from anodes, especially by re-melting. It is also possible to recycle some materials from the cathodes, especially sulfur by re-melting and graphite by dry crushing, Eco-bat Technologies method or the method investigated by Xiang et al. There is no effective recycling methods for electrolytes, binders and separators. It is necessary to carry out further studies on them.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Informacja

Wyszukujesz frazę "anode" wg kryterium: Temat