Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "common rail" wg kryterium: Temat


Tytuł:
Analyze of possibility of the SB3.1 diesel engine modernisation
Analiza możliwości modernizacji silnika SB 3.1
Autorzy:
Szczęch, L.
Tematy:
silniki spalinowe
układ common rail
combustion engine
Common Rail system
Pokaż więcej
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Powiązania:
https://bibliotekanauki.pl/articles/246364.pdf  Link otwiera się w nowym oknie
Opis:
Analyse of possibility of the SB3.1 investigative diesel engine modernisation is showed in this paper. The engine is the excellent tool permitting to conduct investigative work over processes of fuel mixture production, spontaneous ignition and burning in a diesel engine with direct injection. It makes possible put in the changes of compression rate, the camshaft timing angle and the fuel injection timing angle. The obsolete system of the engine feeding, equipped with row injection's pump and injector come from the SW-680 engine is his drawback. Use of injection system type Common Rail allows solution of imperfection of this engine. That system would permit to extension of the engine SB3.1 investigative possibilities on investigation of processes limiting the emission of toxic compounds in exhaust gases and especially the soot filters and the catalytic afterburners or systems of reducing of nitrogen oxides emission. The modernization of engine SB3.1 contains the change of a high pressure pump with fuel pressure over 135 mpa and electronically controlled injector. The engine has also to be equipped in number of the control and measuring devices and the control unit to control of influence of converting gathered measuring signals on a fuel dose injected to cylinder.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Usterki mechaniczne wtryskiwaczy układów Common Rail
Mechanical damages in Common Rail fuel injectors
Autorzy:
Stoeck, T.
Osipowicz, T.
Tematy:
wtryskiwacze paliwa
system Common Rail
uszkodzenia mechaniczne
fuel injectors
Common Rail system
mechanical damages
Pokaż więcej
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Powiązania:
https://bibliotekanauki.pl/articles/312111.pdf  Link otwiera się w nowym oknie
Opis:
W artykule przedstawiono przyczyny i skutki najczęściej spotykanych uszkodzeń mechanicznych, które obserwuje się we wtryskiwaczach układów zasobnikowych Common Rail (CR). Analizie poddano wybrane części składowe, wskazując na elementy najczęściej ulegająceprocesom niszczącym.
This paper presents the causes and consequences of mechanical damages in Common Rail (CR) fuel injectors. The analysis included selected components, pointing to the elements and assemblies being most frequently subject to destructive processes.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena zużycia korozyjnego elementów wtryskiwaczy
Evaluation of the corrosive wear of fuel injector elements
Autorzy:
Stoeck, T.
Gołębiewski, W.
Tematy:
wtryskiwacze paliwa
system Common Rail
korozja elementów
fuel injectors
Common Rail system
component corrosion
Pokaż więcej
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Powiązania:
https://bibliotekanauki.pl/articles/316160.pdf  Link otwiera się w nowym oknie
Opis:
W artykule przedstawiono przyczyny i skutki korozji, wpływającej destrukcyjnie na stan techniczny oraz niezawodność eksploatacyjną wtryskiwaczy układów Common Rail. Analizie poddano wybrane części składowe, wskazując na elementy najczęściej ulegające procesom niszczącym. Wskazano na niedomagania charakterystyczne dla wtryskiwaczy czołowych producentów, których przykłady dodatkowo zilustrowano.
This paper presents the causes and consequences of corrosion which has a destructive impact on the technical condition and operational reliability of Common Rail fuel injectors. The analysis included selected components, pointing to the elements and assemblies being most frequently subject to destructive processes. The troubles being typical for the fuel injectors of leading manufacturers, the examples of which were additionally illustrated, were shown.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Diagnostyka i regeneracja wtryskiwaczy CR
Diagnostics and regeneration of Common Rail injectors
Autorzy:
Konieczny, L.
Adamczyk, B.
Adamczyk, G.
Tematy:
wtryskiwacze Common Rail
diagnostyka
stoły probiercze
Common Rail injectors
diagnostics
professional test stands
Pokaż więcej
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Powiązania:
https://bibliotekanauki.pl/articles/197525.pdf  Link otwiera się w nowym oknie
Opis:
W ramach artykułu przestawiono metodykę diagnostyki, regeneracji oraz regulacji wtryskiwaczy Common Rail na profesjonalnych stołach probierczych. Maszyna EPS 815 firmy Bosch umożliwia sprawdzenie i naprawę wszystkich rodzajów wtryskiwaczy firmy BOSCH, zgodnie z wymogami i standardami stawianymi przez producenta. W artykule przedstawiono przykładową diagnostykę wtryskiwaczy na tych stanowiskach oraz stosowane metody regeneracji i kodowania wtryskiwaczy po regeneracji.
The article presents the methodology of Common Rail injector diagnostic, regeneration and regulation with use of professional test stands. The EPS 815 machine can be used to test and repair all BOSCH injectors fully satisfying the producer requirements and standards. The article describes an example injector diagnosis with use of such test stand and additionally presents appropriate injector regeneration and encoding techniques.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wstępne badania monitorujące poziom drgań silnika zasilanego systemem common-rail
Vibration level monitoring of a common rail diesel engine
Autorzy:
Larisch, J.
Tematy:
silnik ZS
wtrysk Common Rail
hałas procesu spalania
diesel engine
common rail
combustion noise
Pokaż więcej
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Powiązania:
https://bibliotekanauki.pl/articles/157167.pdf  Link otwiera się w nowym oknie
Opis:
W publikacji przedstawiono badania wstępne silnika o zapłonie samoczynnym wyposażonego w układ wtryskowy Common Rail, który również jest, coraz szerzej stosowany w dużych stacjonarnych silnikach. System wtrysku sterowanego elektronicznie, typu Common Rail, z uwagi na możliwości wieloparametrowej regulacji w zakresie stosowanych procedur strategicznych i operacyjnych, silnie wpływa na przebieg spalania w silnikach o zapłonie samoczynnym, a tym samym wpływa na zmiany poziomu drgań i hałasu emitowanego przez te silniki. Badania wykonano, w celu oceny przydatności monitorowania poziomów drgań silnika wyposażonego w elektronicznie sterowany system wtryskowy. Przeprowadzone badania, o charakterze diagnostycznym i regulacyjnym, były badaniami rozpoznawczymi, w trakcie, których stwierdzono znaczący wpływ wybranych parametrów regulacyjnych systemu wtryskowego, na charakter zmian sygnału wibroakustycznego, wynikającego z procesu spalania w silniku o zapłonie samoczynnym. Parametrami regulacyjnymi były: ciśnienie wtrysku, zmiany charakteru dawki wtrysku, kąt wyprzedzenia wtrysku, oraz recyrkulacja spalin. Wyniki badań wstępnych dają podstawę do opracowania koncepcji systemu diagnostycznego, dla silników stacjonarnych.
Pre-examinations of a diesel engine with the common rail injection system are presented in the paper. The common rail system is more and more extensively used in big stationary engines. It influences strongly the combustion process in diesel engines and, thus, changes of the vibration and noise level caused by these engines due to possibilities of multi-parameter control within the strategic and operating procedures applied. Investigations aimed at estimation of usefulness of the common rail diesel engine vibration level monitoring. The carried out experiments of diagnostic and operation aspect showed the significant influence of selected operational parameters of the injection system, namely: the injection pressure, change of character of the injection dose, the injection timing and EGR, on the character of changes of the accelerometer signal of combustion process in the compression ignition engine. The pre-examination results can be a basis for elaboration of an idea of the diagnostic system for stationary engines.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Marine diesel engine common rail injectors monitoring with vibration parameters
Kontrola stanu technicznego wtryskiwaczy common rail silników okrętowych na podstawie pomiarów parametrów drganiowych
Autorzy:
Kluczyk, Marcin
Grządziela, Andrzej
Tematy:
marine engines
diagnostics
vibrations
Common Rail injectors
silnik okrętowy
diagnostyka
drgania
wtryskiwacze Common Rail
Pokaż więcej
Wydawca:
Polska Akademia Nauk. Polskie Towarzystwo Diagnostyki Technicznej PAN
Powiązania:
https://bibliotekanauki.pl/articles/328988.pdf  Link otwiera się w nowym oknie
Opis:
The paper presents a results of vibration tests of common rail injectors operating in diesel engines. The most common methods of diagnosing common rail injectors (CR) as well as the most common damage of injectors of this type have been described. The results and analyzes of tests obtained during measurements on two different test stands were presented. Obtained results allowed for the preliminary determination of diagnostically sensitive parameters, which may allow the development of the injector diagnostics method without the need to stopping the engine.
W artykule przedstawiono wyniki badań drganiowych wtryskiwaczy Common Rail pracujących w silnikach o zapłonie samoczynnym zasilanych. Opisano najpowszechniej stosowane metody diagnozowania wtryskiwaczy Common Rail (CR), jak również najczęstsze uszkodzenia wtryskiwaczy tego typu. Zaprezentowano wyniki i analizy badań uzyskane podczas pomiarów na dwóch różnych stanowiskach testowych. Uzyskane wyniki pozwoliły na wstępne określenie parametrów wrażliwych diagnostycznie, co może pozwolić na opracowanie metody diagnostyki wtryskiwaczy bez potrzeby zatrzymywania silnika.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the procedure of evaluation of the technical condition of a high-pressure common rail fuel pump using a test bed
Autorzy:
Bor, M.
Idzior, M.
Karpiuk, W.
Smolec, R.
Tematy:
common rail
test bench
diagnostic
Pokaż więcej
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Powiązania:
https://bibliotekanauki.pl/articles/243763.pdf  Link otwiera się w nowym oknie
Opis:
Piston displacement pumps use in common rail fuel injection systems generates very high pressure, reaching even 300 MPa. Maintaining such a high pressure is possible thanks to very precise machining resulting in as little clearance between the piston-cylinder assemblies. Due to very high forces operating in the systems and relatively unfavourable lubrication conditions resulting from using fuel as lubricants, the pumps are subject to wear and consequently lose their operating parameters. The high cost of production of the pumps, resulting from their technological advancement, forced their manufacturers to introduce technologies for diagnosing and regenerating them. The diagnostics consists in removing the pump from the engine and having it verified using a test bed. The first stage consists of evaluating the pump’s flow at null pressure; follow by evaluation of its maximal delivery for the pressure of 100 MPa. The obtained values are compared to the values achieved by a new pump. The effect of negative evaluation on a test bed is the disassembly of the pump, verification of the condition of its parts and replacement of the damaged elements. The authors examined new and used pumps on a tested, aiming to determine the characteristics of delivery of a pump for various pressures. The objective of the research was to identify the actual points in the pump’s operation at which the delivery drops the most due to the wear. The highest difference in delivery was found to exist for the maximal compression pressure. The obtained results were analysed and the possibility of changing the pump diagnostics procedure with the use of a test bed was determined.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental Research on the Influence of the Composition of the Fuel Mixture on the Operating Parameters of a Single-Cylinder Common Rail Diesel Engine
Autorzy:
Tucki, Karol
Mruk, Remigiusz
Tematy:
vehicle
biofuel
fuel
common rail
Pokaż więcej
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Powiązania:
https://bibliotekanauki.pl/articles/2205041.pdf  Link otwiera się w nowym oknie
Opis:
The article presents the laboratory tests results of the influence of the diesel oil content in a mixture with rapeseed oil on the operating parameters of a diesel engine with the CommonRail fuel supply system. Fuel mixtures with a rapeseed content of 0%, 50%, 70%, 100% were used. The article presents the results of tests carried out for various configurations of the object. The measurements included tests of exhaust gases: the content of carbon monoxide, carbon dioxide, hydrocarbons, nitrogen oxides as well as specific fuel consumption and exhaust gas temperature. As a result of the research, it was noticed that the use of rapeseed oil causes a significant increase in fuel consumption and an increase in emissions. At a crankshaft speed of 2500 rpm and a torque generated by the engine crankshaft of 12 Nm, the specific fuel consumption for a 0% rapeseed content is 310 g/kWh. For the same engine operating conditions and the same rapeseed content of the fuel, the fuel consumption for 100% rapeseed content is 330 g/kWh. For the same engine operating parameters, analysis of the carbon dioxide content in the exhaust gas yields a value of 7.8x104 ppm for a rapeseed content of 0%. For the same engine operating conditions and for the oilseed rape content in the fuel is 100% 8.4x104 ppm. The mathematical models describing the effects of engine operating parameters and rapeseed oil content in the mixture on the observed values were created with the Scilab program. The degree of agreement of the determined mathematical models was checked by calculating the coefficient of determination (R2). The results are shown in 3D figures.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigation of novel ceramic materials (Al2O3 and SSiC) for high-pressure pumps delivery sections
Autorzy:
Idzior, Marek
Karpiuk, Wojciech
Smolec, Rafał
Tematy:
ceramic
injection systems
common rail
fuel pump
FEM
materiały ceramiczne
układy wtryskowe
Common Rail
pompa paliwa
Pokaż więcej
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Powiązania:
https://bibliotekanauki.pl/articles/59114550.pdf  Link otwiera się w nowym oknie
Opis:
In this paper, a comparative analysis of structural materials used in the construction of high-pressure pumps delivery sections was carried out. The focus was on a comparison of the ceramic materials such as corundum (alumina, Al2O3) and silicon carbide (solid-state sintered) - SSiC with bearing alloy steel 100Cr6, that is the most common material used to make pistons and cylinders of the delivery section of common rail injection pumps. Simulations performed using the finite element method have proven that ceramic materials have a number of advantages and could therefore be an interesting substitute for materials traditionally used in this area.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparative study of fuel injection at common rail system using different types of fuel
Autorzy:
Ustrzycki, A.
Kuszewski, H.
Tematy:
common rail
fuel injection
alternative fuels
Pokaż więcej
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Powiązania:
https://bibliotekanauki.pl/articles/246175.pdf  Link otwiera się w nowym oknie
Opis:
In recent years the use of alternative fuels based, among other things, on vegetable oil is causing increasing concern, which is also observed in our country. Such fuels have different physical and chemical properties (especially viscosity) with reference to the standard diesel fuel. Therefore it is important to know the effect of the additive of biocomponents on fuel injection process, in particular of its parameters, which play an important role in the combustion process and formation of pollutions in exhaust gases. In the paper is presented the test results of selected parameters of the injection process executing by four different electromagnetically controlled injectors using diesel fuel without the biocomponents and mixtures of such fuel with esters of rapeseed oil (FAME). Investigations were carried out on a specially prepared test stand which enables the measurement of fuel delivery and fuel returning from the injector together with its density and temperature. Additionally, beside mentioned parameters, there were recorded high-speed courses of pressure in the high-pressure pipe behind the rail and before the injector. Next, using a system of AVL Visioscope, the fuel injection into the visualization chamber filled with fuel was recorded. It determined the basic parameters of the fuel spray. The aim of this study was to determine the impact of fuel type on the injection process executed by the injectors with different constructional parameters.
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies