Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "delamination" wg kryterium: Temat


Tytuł:
Spatial perturbations in the solidification process due to mold delaminations
Zaburzenia przestrzenne procesów krzepnięcia wywołane delaminacjami na ściance formy
Autorzy:
Pauk, V.J.
Woźniak, M.
Tematy:
solidification
mold delamination
Pokaż więcej
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Powiązania:
https://bibliotekanauki.pl/articles/281242.pdf  Link otwiera się w nowym oknie
Opis:
The solidification process involving small periodical perturbations due to the system of mold delaminations is considered. Imperfections at the mold wall are modelled by non-ideal thermal contact conditions. It leads to the small perturbation in the solid-liquid interface and in the temperature distribution in the solid phase. With the help of approximate technique, known as the heat-balance integral method, the problem is reduced to the sequence of ordinary differential equations in amplitudes of the Fourier series of the solidification front. The shape of solid-liquid interfaces is shown.
W pracy rozpatruje się zagadnienie dwuwymiarowego niestacjonarnego przepływu ciepła w półprzestrzeni ze zmianami fazowymi. Uwzględniono zaburzenia przestrzenne wywołane delaminacjami pomiędzy falą stałą a ścianką formy. Imperfekcje mają rozkład periodyczny i powodują małe periodyczne zaburzenia zarówno w polu temperatury jak i w ruchomej powierzchni rozgraniczającej fazy stałą i ciekłą. W oparciu o przybliżoną metodę znaną jako metodę całek bilansu ciepła, zagadnienie nie sprowadza się do ciągu równań różniczkowych zwyczajnych dla makro-grubości krzepnącej warstwy oraz amplitud zaburzeń frontu krzepnięcia. Rozwiązania analityczne otrzymano pominąwszy kwadraty pewnych małych wielkości. Na wykresach przedstawiono zmiany zaburzeń w czasie dla różnych wartości wyjściowych parametrow.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Using the finite element method in the modeling of layered composite delamination
Autorzy:
Tucki, K.
Tematy:
delamination
composite
analysis
finite element method
Pokaż więcej
Wydawca:
Polska Akademia Nauk. Oddział w Lublinie PAN
Powiązania:
https://bibliotekanauki.pl/articles/410736.pdf  Link otwiera się w nowym oknie
Opis:
The article presents issues associated with an analysis of the process of delamination of fibrous composite using the Finite Element Method. Research encompassed three computer modelling sessions for delamination of the material for three different values of distance between the test force application point and the middle of the laminate. The results, encompassing the force value and displacement, were then compared to identify the correlation between these variables and the distance from the force application point. The model correctness was also verified by comparing the value of forces modelled with the real values, obtained during an experiment. On the basis of the results obtained with regard to the size of the force applied, it was concluded that the numerical model represented well the mathematical model presented by Comanho. The negative result errors were due to the increased sensitivity of the software to the laminate fracture phenomenon, occurring during the experiment. Thanks to good representation of the model, it can be used interchangeably with numerical calculations.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Surface integrity of machined surface in simultaneous cutting of CFRP
Autorzy:
Shimana, Kenji
Kawano, Ryota
Harada, Masakazu
Yoshimitsu, Shinichi
Kobaru, Yuya
Kondo, Eiji
Tematy:
CFRP
thrust force
simultaneous cutting
delamination
Pokaż więcej
Wydawca:
Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Powiązania:
https://bibliotekanauki.pl/articles/99424.pdf  Link otwiera się w nowym oknie
Opis:
Carbon fiber-reinforced plastic (CFRP), a carbon fiber composite material, has high specific strength and stiffness, and has attracted attention as a structural material for transport machines from the viewpoint of improving fuel efficiency through weight reduction. However, the exiting CFRP processing methods have several disadvantages such as high cost, tool wear due to formation of hard chips during cutting, and occurrence of delamination that degrades machining accuracy. These limitations impede the practical application of CFRP. The purpose of this study is to propose a low cost and high precision drilling method “simultaneous cutting” by stacking the different materials with CFRP. Until now, high precision hole drilling has been studied by stacking titanium on CFRP. Because CFRP and titanium parts are joined by bolts in aircraft and so on. However, in this study, an inexpensive and easy to obtain acrylic resin plate was selected as a stacking material to focus on CFRP hole drilling. On the other hand, acrylic resin plate was used for CFRP hole drilling as a waste material. As a result, it was found that the thrust force was reduced by drilling the hole with stacking CFRP between two acrylic resin plates. Furthermore, the occurrence of delamination was suppressed at both the entry and exit sides of the hole.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numeryczna i eksperymentalna analiza rozwoju delaminacji wyboczeniowych w warunkach obciążeń quasi-statycznych
Numerical and experimental investigations of buckle delamination growth in quasi-static Loading condition
Autorzy:
Bajurko, P.
Tematy:
wyboczenie delaminacji
rozwój delaminacji
MES
elementy kohezyjne
buckling delamination
delamination growth
FEM
cohesive elements
Pokaż więcej
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Lotnictwa
Powiązania:
https://bibliotekanauki.pl/articles/213072.pdf  Link otwiera się w nowym oknie
Opis:
Prezentowane w arlykule badania slanowią fragment prac mających na celu opracowanie wzorcowej metodyki oceny wpływu uszkodzeń na trwałość i wytrzymałość konstrukcji wykonanych z nowoczesnych materiałow kompozytowych. Prace te realizowano w Instytucie Lotniclwa w ramach projeklu POIG TEBUK „Opracowanie technologii badań odporności na uszkodzenia lotniczych i kosmicznych kompozytowych struktur nośnych". Zaprezentowane badania dotyczą próbek prostokątnych wykonanych z preimpregnatu węglowo-epoksydowego o wymiarach 150x100x3,96 mm z centralnie umieszczoną delaminacją kołową o średnicy 40 mm. Zbadano numerycznie i eksperymenlalnie rozwoj delaminacji pod wpływem obciążeń quasi-statycznych. Badania numeryczne obejmowaly liniową analizę wyboczeniową odseparowanych delaminacją warstw oraz nieliniową analizę rozwoju delaminacji. Wyniki badań numerycznych porównano z wynikami badań eksperymenlalnych. Badania wykazały, że obiekt badawczy ze względu na zbyt małą grubość okazał się zbyt wiotki, aby przeprowadzić prawidłową weryfikację.
Presented in this article studies are part of work conducted to develop a reference methodology for assessing the impact of damage to the durability and strength of structures made of advanced composite materials. This work was carried out under the project TEBUK "Development of the technology for testing the resistance to damage of aviation and space composite load bearing structures", which is carried out in the Institute of Aviation. The analyzed carbon-epoxy rectangular plate 150x100x3,96 mm contained 40 mm diameter delamination located in its center. The propagation of the delamination in quasi-static loading condition of the plate was investigated. The paper presents results of the linear buckling analysis and the nonlinear analysis of postbuckling delamination propagation. The numerical results were compared with the results of experimental research. Studies have shown that the tested plate was too small thickness, and was too sensitive to global buckling to perform proper verification.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of montmorillonite hydration and delamination on coal flotation
Autorzy:
Zhang, Lucheng
Zhang, Mingqing
Liu, Qi
Song, Shuoshuo
Tian, Yu
Barvora, Joshua Bosco
Tematy:
coal flotation
montmorillonite
hydration
delamination
slime coating
Pokaż więcej
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Powiązania:
https://bibliotekanauki.pl/articles/2175432.pdf  Link otwiera się w nowym oknie
Opis:
In this study, the influence of montmorillonite (MT) hydration and delamination on coal flotation was investigated through flotation tests using coal-MT mixtures. MT particles were subjected to hydration at different time intervals. The Fuerstenau upgrading curve was plotted to evaluate the change in overall flotation selectivity. The zeta potential and particle size distribution were used to characterize the delamination behavior of MT in deionized water at natural pH level. Atomic force microscopy (AFM) (colloidal probe) was used to analyze the interaction force between coal and MT particles. It was found that smaller particles (individual silicate layers or thin packets of layers) with higher zeta potentials appeared gradually, and their volume proportion increased with increasing hydration time. AFM results showed that a monotonous repulsive force was detected consistently throughout the separation distance between coal and these emerging smaller MT particles. The decrease of these MT coating on coal surface was responsible for the higher flotation recovery and better selectivity. A jump-into-contact phenomenon was observed in coal and MT interaction when MT hydrated incompletely. It showed that heterocoagulation between coal and MT occurred and MT coating on the coal surface was responsible for the depression of flotation.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zużycie delaminacyjne stali AISI 304 w warunkach tribokorozji
Delamination wear of steel AISI 304 in tribocorrosive conditions
Autorzy:
Stachowiak, A.
Zwierzycki, W.
Tematy:
tribokorozja
zużycie delaminacyjne
tribocorrosion
delamination wear
Pokaż więcej
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Powiązania:
https://bibliotekanauki.pl/articles/188109.pdf  Link otwiera się w nowym oknie
Opis:
W artykule przedstawiono wyniki badań zużywania korozyjno-mechanicznego (tribokorozji) stali AISI 304 w 3,5% roztworze NaCl. Badania wykonano na specjalistycznym stanowisku z węzłem modelowym typu pin-on-disc, zaprojektowanym i wykonanym w Instytucie Maszyn Roboczych i Pojazdów Samochodowych Politechniki Poznańskiej. Po testach przy obciążeniu rzędu 0,36 MPa i średniej prędkości ślizgania 60 mm/s, na powierzchni tarcia zaobserwowano ślady charakterystyczne dla zużywania delaminacyjnego. Wyniki badań zilustrowano zdjęciami mikroskopowymi powierzchni zużycia oraz zgładu wykonanego wzdłuż drogi tarcia. Dodatkowo zamieszczono rezultaty symulacji numerycznych (rozkład naprężeń i współczynnika intensywności naprężeń w strefie styku) potwierdzające możliwość propagacji pęknięcia (zainicjowanego w miejscach nieciągłości) równolegle do powierzchni tarcia.
The paper presents the results on tests of corrosive and mechanical wear (tribocorrosion) of stainless steel AISI 304 in solution of 3.5% NaCl. The experiments were carried out on a technical stand with a model pair type pin-on-disc. The stand was designed and implemented in the Institute of Machines and Motor Vehicles of Poznań University of Technology. After tests on friction in a sliding pair for the steel AISI 304 in a solution of 3.5% NaCl at a pressure 0.36 MPa and mean sliding speed 60 mm/s, imprints characteristic for delamination wear were observed. The results of tests were illustrated by microscopic photos of the surface of wear and a microsection along the friction surface. Additionally, the results of numerical simulation (stress distribution in the sliding contact and stress intensity factor) were included. These results confirm the possibility of cracking (initiated in the dislocation points) parallel to the fiction surface.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Study on Mechanical Strength and Failure of Fabric Reinforced Polymer Composites
Autorzy:
Korzec, Izabela
Samborski, Sylwester
Łusiak, Tomasz
Tematy:
delamination
fractography
strength tests
CFRP composite
Pokaż więcej
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Powiązania:
https://bibliotekanauki.pl/articles/2180604.pdf  Link otwiera się w nowym oknie
Opis:
The paper presents a study on influence of different fabric weave and fabric orientation on strength properties of fiber reinforced polymer composites. The research concerns materials used in a new type of rotorcraft. Four series of laminates were fabricated with hand forming, using the MGS L285/H285 epoxy resin. Triple-kind experiments were performed: the Shore hardness measurements, tensile strength testing and fractographic analysis. The specimens of different series shown various strength and stiffness characteristics, depending on the type of weave and fabric layup. Three different failure schemes were observed. The Poisson coefficient was different among series, as well, but no understandable link to specimen morphology could be found so far. Fractographic observations suggested intralaminar delamination.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Interfacial shear and peeling stresses in a two-plate structure subjected to monotanically increasing thermal loading
Autorzy:
Nikolova, G.
Ivanova, J.
Tematy:
monotonic thermal loading
delamination
Interfacial shear
peeling stress
Pokaż więcej
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Powiązania:
https://bibliotekanauki.pl/articles/280329.pdf  Link otwiera się w nowym oknie
Opis:
An approximate analytical model is developed for the evaluation of the interfacial shear and peeling stresses in a bi-material element composed of two elastic plates bonded together by an interface zero thickness material and subjected to monotonically increasing thermal loading. Thermal peeling stress is caused by thermal and elastic mismatch of a two-plate structure undergo a temperature change. The “peeling” stress can be determined from the evaluated interfacial shear stress and is proportional to deflections of the thinner plate of the structure, i.e. to its displacements with respect to the thicker plate. The interface is assumed to exhibit brittle failure at the critical shear stress value. The analytical solution qualitatively shows delamination and ultimate failure. The results are illustrated in figures and discussed.
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies