Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "measurement methodology" wg kryterium: Temat


Artykuł
Tytuł:
Determination of the reactance of rail vehicles wheelsets
Autorzy:
Garczarek, Adam
Woźniak, Krystian
Olejniczak, Tomasz
Waśkowicz, Radosław
Stachowiak, Dorota
Tematy:
resistance
impedance
reactance
traction vehicles
measurement methodology
wheelset
Pokaż więcej
Wydawca:
Sieć Badawcza Łukasiewicz - Poznański Instytut Technologiczny
Powiązania:
https://bibliotekanauki.pl/articles/33343772.pdf  Link otwiera się w nowym oknie
Opis:
The article presents issues related to the determination of resistance, impedance, and reactance of rail vehicles wheelsets in relation to applicable standards and regulations. The methodology of conducting this type of test is discussed, and a configured test stand is presented to measure the resistance and impedance of the wheelsets. The uncertainty budget for this type of testing is discussed. Exemplary measurement results are presented and analyzed.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Problemy oceny hałasu farm elektrowni wiatrowych na podstawie terenowych pomiarów kontrolnych
Problems of Assessment of Wind Farm Noise on the Basis of Local Control Measurements
Autorzy:
Ingielewicz, R.
Zagubień, A.
Tematy:
pomiar hałasu
farma wiatrowa
metodyka pomiarowa
noise measurement
wind farm
measurement methodology
Pokaż więcej
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Powiązania:
https://bibliotekanauki.pl/articles/1815489.pdf  Link otwiera się w nowym oknie
Opis:
W artykule podjęto próbę opisania i wyjaśnienia specyfiki zagadnień akustyki farm wiatrowych oraz przedstawiono propozycje uzupełnienia obowiązujących w Polsce metod pomiaru i oceny hałasu farm wiatrowych. Rozważania dotyczą hałasu słyszalnego korygowanego krzywą korekcji A. Zalecana referencyjna metodyka pomiarowa ustala szereg ograniczeń, co do warunków atmosferycznych panujących podczas pomiarów, lokalizacji punktów pomiarowych, zestawów pomiarowych oraz określa sposób wykonywania pomiaru. Do najistotniejszych zapisów obowiązującej w Polsce metodyki referencyjnej, ze względu na pomiary hałasu turbin wiatrowych, należy ograniczenie prędkości wiatru na wysokości mikrofonu, do wartości średniej nie większej od 5 m/s. Ocenę zagrożenia hałasem, wykonano na podstawie wyniku pomiaru w postaci równoważnego poziomu dźwięku, który jest porównywany z poziomami dopuszczalnymi określonymi dla pory dziennej i pory nocnej. W celu wykonania oceny dla możliwie najbardziej niekorzystnego akustycznie przypadku pracy turbin wiatrowych, pomiary należałoby wykonać przy prędkości wiatru odpowiadającej maksymalnym poziomom mocy akustycznej turbin. W wyniku prowadzonych obliczeń numerycznych dla ponad 50 projektów budowy farm wiatrowych oraz podczas pomiarów na ponad 15 dużych farmach wiatrowych autorzy artykułu zgromadzili bazę danych związanych z numeryczną analizą akustyczną i pomiarami hałasów generowanych przez elektrownie wiatrowe. Zawarte w artykule propozycje zmian obowiązującej metodyki pomiarowej wynikają z własnych doświadczeń pomiarowych. W artykule podjęto próbę opisania i wyjaśnienia specyfiki zagadnień akustyki farm wiatrowych oraz przedstawiono propozycje uzupełnienia obowiązujących w Polsce metod pomiaru i oceny hałasu farm wiatrowych. Zaproponowano szereg zmian i uzupełnień metodyki referencyjnej wykonywania pomiarów hałasu w odniesieniu do turbin wiatrowych. Zwrócono uwagę na częste przypadki występujące w praktyce rejestracji hałasu od elektrowni wiatrowych jak np.: pomiar nierozróżnialny z tłem akustycznym. Uzasadniono konieczność wprowadzenia zalecenia wykonywania pomiarów hałasu elektrowni wiatrowych wyłącznie metodą próbkowania oraz podano sposób eliminacji zakłóceń. Podano kryteria lokalizacji punktów pomiarowych. Zasugerowano konieczność wykonywania pomiarów w czterech porach roku. Podano zakres prędkości wiatru, podczas którego powinno wykonywać się pomiar hałasu. Zwrócono uwagę na konieczność podawania w raporcie z badań prędkości wiatru rejestrowanych na wieżach turbin. Zaproponowano interpretację przypadku, gdy zmierzony poziom imisji hałasu jest nierozróżnialny z tłem akustycznym, a jednocześnie poziom imisji nie przekracza wartości poziomów dopuszczalnych pory dziennej i nocnej w danym punkcie, że w takim przypadku poziom imisji hałasu w danym punkcie nie stanowi zagrożenia dla środowiska i ludzi.
In the article we made an attempt of description and explanation of specificity of wind farm noise issues and also we have suggested some ideas of supplementing methods of measurement and assessment of wind farm noise which are in force in Poland. The discussion concerns audible noise corrected by corrective curve A. Suggested reference method of measurement sets up many limitations regarding weather conditions during measurements, localization of measuring points, measurements sets and it also determines the way of performing measurements. The assessment of noise risk is made on the basis of the result of measurement in a form of equivalent noise level which is compared to permissible noise levels for both day and night time. The authors suggest following changes, recommendations and supplements of reference methodology of noise measurement regarding wind turbines: Introducing recommendation of measurements only by sampling method, regarding changeable wind speed and other weather parameters during the day and night. The time of sample measurement enabling elimination of influence of disruptions should be 60 seconds; in cases of frequent disruptions 10 seconds. This concerns both the measurement of turbine noise and acoustic background after switching off and stopping the turbines. The measurements of acoustic background should be done only after stopping the turbines, in the same control points where the measurements of noise were done when the turbines were working. All control points should be set up on the borders of closest acoustically protected areas, at the height of 1.5 m above the ground level not next to the walls of the protected building. Noise measurements should be done at the speed of wind - from 2.5 m/s to 5.0 m/s, measured vertically at 3.0 m. There should be recommendation to carry out the measurements in four year seasons, which will enable considering changeable weather conditions such as: humidity, pressure and wind direction and also changeable undergrowth of the area influencing the sound wave propagation. Before measurements, the team should get acquainted with the acoustic part of the report of impact on environment and with the technical documentation of the wind turbines to establish at what wind speed the certain type of a turbine reaches maximum sound power level. There should be the obligation to make it accessible for the team to get information about average wind speed for each turbine during performing noise monitoring, recommended in environmental decision. On the basis of computer records of wind farm dispatcher it should be established at what wind speeds, at the height of the axis of certain wind turbines, noise immision measurements were done. In the report there should be given the range of averaged values of wind speed related to the time of doing measurements. In cases when the measured noise immission level is undifferentiated from acoustic background and in the same time, the immission level does not exceed the permissible levels for day and night time, in a certain point there should be an interpretation record, stating that in this case the level of noise immission in this certain point is not a threat to the environment and people. Joint information regarding the noise threat connected with wind turbines gained from properly conducted numerical analysis at the stage of wind farm project and after-realisation local measurements, carried out in a way considering all recommendations and supplements will enable the objective acoustic assessment of wind farm impact on the environment.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of terrestrial laser scanning measurements for wind turbine blade condition surveying
Autorzy:
Stałowska, Paulina
Suchocki, Czesław
Zagubień, Adam
Tematy:
Terrestrial Laser Scanning
TLS
intensity parameter
measurement methodology
wind turbine blades
condition surveying
defects detection
Pokaż więcej
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Powiązania:
https://bibliotekanauki.pl/articles/27311749.pdf  Link otwiera się w nowym oknie
Opis:
Wind turbines are among the key equipment needed for eco-friendly generation of electricity. Maintaining wind turbines in excellent technical condition is extremely important not only for safety but also for efficient operation. Studies indicate that defects in the external structure of a turbine blade reduce energy production efficiency. This research investigated the potential of the terrestrial laser scanning technology to examine the technical conditions of wind turbine blades. The main aim of the study was to examine whether terrestrial laser scanning measurements can be valuable for wind turbine blade condition surveying. The investigation was based on the radiometric analyses of point clouds, which forms the novelty of the present study. Condition monitoring focuses on the detection of defects, such as cracks, cavities, or signs of erosion. Moreover, this study consisted of two stages. The next objective entailed the development and examination of two different measurement methods. It was then identified which method is more advantageous by analysing their effectiveness and other economic considerations.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Propozycja usprawnienia metodyki pomiarów dopływów wód podziemnych do wyrobisk w kopalniach LGOM na przykładzie OG Polkowice
The proposal of methodology of measurements and estimation of groundwater inflow into underground workings of LGOM mines exemplified by the Polkowice mining area
Autorzy:
Błachowicz, M.
Tematy:
podziemny drenaż kopalni
Dzielnica Miedziowo-Głogowska
kopalnia Polkowice-Sieroszowice
metodologia pomiaru
underground mine drainage
Legnica-Glogów Copper District
Polkowice-Sieroszowice Mine
measurement methodology
Pokaż więcej
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Powiązania:
https://bibliotekanauki.pl/articles/2075847.pdf  Link otwiera się w nowym oknie
Opis:
This paper presents an analysis of the groundwater inflow into the Polkowice mining area. It is a mining area where the highest inflow into the mine from the whole Legnica-Glogów Copper District can be observed. In the multi-aquifer formation system, which occurs in the study area, a significant role is played by: Paleogene and Neogene, Triassic and Permian aquifers. The principal objective was to determine the discharging groundwater resources in deep aquifers in relation to the current hydrogeological conditions observed in the mine. The results helped to describe problems and possibilities of high frequency measurements in mine workings and to give some clues to the improvement of measurement methodology. This research was based on direct measurements, analysis of collecting data, and a comparison with existing data regarding the inflow into the mine workings.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metoda DIC
DIC (digital image correlation) method in the research of RC beams strengthened with PBO-FRCM materials
Autorzy:
Marcinczak, Dorota
Tematy:
belka
ścinanie
kompozyt
metodyka pomiaru
korelacja obrazu cyfrowa
mechanizm zniszczenia
odkształcenie
PBO-FRCM
beam
shear
composite
measurement methodology
digital image correlation
DIC
destruction mechanism
deformation
Pokaż więcej
Wydawca:
PWB MEDIA Zdziebłowski
Powiązania:
https://bibliotekanauki.pl/articles/129343.pdf  Link otwiera się w nowym oknie
Opis:
The article presents tests of a reinforced concrete beam strengthened in a shear with PBO-FRCM composite materials. Measurement of the deformation of the composite was carried out using two methods - with strain gauges and the optical DIC method (Digital Image Correlation). The DIC method consists in taking a series of photographs of the tested object before and during loading. The surface of the tested element must have randomly spaced spots that are applied to the object before measurement. During the study, the cameras monitor the shifting of spots against each other, which in comparison to the reference image before loading gives information about strains and stresses of the tested element. Measurements of deformation of composite materials using strain gauges are difficult to clearly analyze, because the strain gauge is in a specific, limited place, which does not correspond to the work of the entire composite. In addition, the strain gauge tends to break at the place of crack. The article discusses this problem by presenting the results of deformation of PBO-FRCM composite meshes measured in two mentioned ways, their comparison and discussion of results.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kryteria oceny wpływu drgań komunikacyjnych na budynki zabytkowe i ludzi w budynkach w ujęciu normowym
Criteria for the evaluation of the effect of vibrations on the historical buildings and humans in buildings in standards approach
Autorzy:
Kawecki, J.
Tematy:
drganie komunikacyjne
oddziaływanie na środowisko
budynek zabytkowy
człowiek
metodyka pomiaru
interpretacja wyników
kryteria oceny
normalizacja
traffic vibration
environmental impact
historic building
human being
measurement methodology
results interpretation
assessment criteria
standardisation
Pokaż więcej
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Powiązania:
https://bibliotekanauki.pl/articles/162258.pdf  Link otwiera się w nowym oknie
Opis:
Niniejsza praca opisuje ocenę wpływu wibracji komunikacyjnych na budynki historyczne i ludzi znajdujących się w ich wnętrzach. Tekst opisuje także metody pomiaru i interpretacji wyników badań diagnostycznych. Szczególną uwagę poświęcono problemom wynikającym z braku analiz symulacyjnych w przypadku izolacji wibracyjnych dróg. Ponadto, praca opisuje także przygotowywane nowelizacje norm.
The present paper describes the criteria used to evaluate the effect that road traffic-induced vibration has on historical buildings and on the people inside these structures. The article additionally describes the methodology for measurement and interpretation of the results, adopted throughout the diagnostic procedures. The paper additionally focuses on the issues, resulting from the lack of proper simulation analyses regarding the vibration dampening and isolation methods, when it comes to road design. The author additionally creates amendment proposals, for the standards in force.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Influence Of Propagation Environment On The Accuracy Of Emission Source Bearing
Autorzy:
Ziółkowski, C.
Kelner, J. M.
Tematy:
DF
methodology of bearing measurement
bearing accuracy
measurements in multipath environment
power azimuth spectrum
Pokaż więcej
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Powiązania:
https://bibliotekanauki.pl/articles/220529.pdf  Link otwiera się w nowym oknie
Opis:
This paper focuses on the radio direction finding (DF) in multipath environments. Based on the measurement results presented in the open literature, the authors analyse the influence of environment transmission properties on the spread of the signal reception angle. Parameters that define these properties are rms delay and angle spreads. For these parameters, the mutual relationship is determined. This relationship is the basis for assessment of the required number of bearings that minimize the influence of the environment on the accuracy of DF procedure. In the presented analysis, the statistical properties of the signal reception angle are approximated by the normal distribution. The number of bearings versus the rms delay spread is presented as the main objective of this paper. In addition, a methodology of the bearings’ spatial averaging that provides better estimation of the reception angle is shown.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wybrane koncepcje pomiaru nierówności dochodowych
Autorzy:
Przekota, Grzegorz
Tematy:
nierówności dochodowe
pomiar
metodyka
income inequalities
measurement
methodology
Pokaż więcej
Wydawca:
Uniwersytet Rzeszowski. Wydawnictwo Uniwersytetu Rzeszowskiego
Powiązania:
https://bibliotekanauki.pl/articles/1913395.pdf  Link otwiera się w nowym oknie
Opis:
Wyznaczenie poziomu nierówności dochodowych wymaga przyjęcia określonej metodyki pomiaru. Celem pracy uczyniono przegląd i dyskusję nad metodyką pomiaru nierówności dochodowych. Przedstawiono cztery różne miary oparte na innych założeniach. Wśród wyróżnionych miar znalazł się współczynnik Giniego, współczynnik Theila, współczynnik Kukuły oraz współczynnik nierównomierności. Trzy pierwsze miary, a w szczególności współczynnik Giniego, są powszechnie opisywane w literaturze przedmiotu, natomiast współczynnik nierównomierności jest autorską propozycją pomiaru nierówności dochodowych. Materiał empiryczny do badań stanowią dane dotyczące rozkładu dochodu rozporządzalnego według grup decylowych w gospodarstwach domowych w Polsce w latach 2005–2017. Najważniejszą w praktyce kwestią dotyczącą pomiaru nierówności dochodowych okazała się zasada transferu. W zależności od przyjętej metodyki transfer dochodów jest różnie traktowany. Współczynniki Giniego, Theila i Kukuły reagują na każdą zmianę w rozkładzie dochodów, natomiast współczynnik nierównomierności tylko na zmiany przekraczające przeciętną. W sytuacji kiedy maleje (rośnie) współczynnik Giniego (Theila i Kukuły), zmniejsza się (zwiększa się) poziom nierównomierności, jednak nie wiadomo, jakie transfery doprowadziły do takiego wyniku. Malejący (rosnący) współczynnik nierównomierności oznacza, że były to transfery z grup o udziałach w dochodzie powyżej (poniżej) przeciętnej do grup o udziałach poniżej (powyżej) przeciętnej
Determining the level of income inequality requires the adoption of a specific measurement methodology. The aim of the study was to review and discuss the methodologies used to measure income inequality. Four measures are presented, each based on different assumptions. These measures were the Gini coefficient, Theil coefficient, Kukuła coefficient and unevenness coefficient. The firs three measures, and in particular the Gini coefficient, are commonly described in the literature, while the unevenness coefficient is the author’s proposal for measuring income inequality. The empirical material for the research consists of data on the distribution of disposable income by decile groups in households in Poland for the years 2005–2017. The most important issue in practice regarding the measurement of income inequality was the transfer principle. Depending on the methodology adopted, the transfer of income is treated differently The Gini, Theil and Kukula coefficients respond to any change in the income distribution, while the unevenness coefficient only to changes above the average. In a situation where the Gini coefficie (Theil and Kukula) decreases (increases), the level of inequality decreases (increases), but it is not known which transfers led to such a result. The decreasing (growing) unevenness coefficient means that these were transfers from groups with shares in income above (below) the average for groups with shares below (above) the average.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Amendment of the Standardization Rules Concerning Testing of Rolling Stock in Terms of EMC
Nowelizacja przepisów normalizacyjnych dotyczących badań taboru kolejowego w zakresie EMC
Autorzy:
Dłużniewski, A.
John, Ł.
Laskowski, M.
Tematy:
rolling stock
methodology of measurement
electromagnetic compatibility
radiation disturbance emission
conducted disturbance emission
tabor kolejowy
metodyka pomiarów
kompatybilność elektromagnetyczna
emisja zaburzeń promieniowana
emisja zaburzeń przewodzona
Pokaż więcej
Wydawca:
Instytut Kolejnictwa
Powiązania:
https://bibliotekanauki.pl/articles/215597.pdf  Link otwiera się w nowym oknie
Opis:
The paper presents the methodology of radiated and conducted disturbance emission measurement in on-board rolling stock power low voltage network in reference to current obligatory normative standard requirements PN-EN 50121-X-X. The article presents in detail the methodology of measurement, permissible levels of radiation disturbance emission during stand and during vehicle ride and the levels of conducted disturbance emission in on-board low voltage power network. In conclusion, the paper outlines the comparison of obligatory, normative standard requirements in this range along with a new edition of rail standards, which will be implemented soon, due to the old editions of current standards documents based on rolling stock should be tested in terms of EMC in order to fulfill normative requirements.
W artykule przedstawiono metodykę pomiarów emisji zaburzeń promieniowanych i przewodzonych w pokładowej sieci zasilającej niskiego napięcia taboru kolejowego na przykładzie obecnie obowiązujących wymagań norm serii PN-EN 50121-X-X. Szczegółowo przedstawiono metodykę pomiarów, dopuszczalne poziomy emisji zaburzeń promieniowanych na postoju i w trakcie jazdy pojazdu oraz emisji zaburzeń przewodzonych w pokładowej sieci zasilającej niskiego napięcia. Porównano obowiązujące wymagania normatywne w tym zakresie, z nowym planowanym wydaniem norm kolejowych, które niedługo zastąpią obecne normy.
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies