Temat: numerical method - Prolib Integro

Skocz do pozycji: 1.

Tytuł:: Numerical evaluation of sound attenuation provided by periodic structures
Autorzy:: Martins, M.
Godinho, L.
Picado-Santos, L.
Tematy:: traffic noise
sonic crystals
numerical method; Pokaż więcej
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Powiązania:: https://bibliotekanauki.pl/articles/176630.pdf Link otwiera się w nowym oknie
Opis:: The use of periodic structures as noise abatement devices has already been the object of considerable research seeking to understand its efficiency and see to what extent they can provide a functional solu- tion in mitigating noise from different sources. The specific case of sonic crystals consisting of different materials has received special attention in studying the influence of different variables on its acoustic performance. The present work seeks to contribute to a better understanding of the behavior of these structures by implementing an approach based on the numerical method of fundamental solutions (MFS) to model the acoustic behavior of two-dimensional sonic crystals. The MFS formulation proposed here is used to evaluate the performance of crystals composed of circular elements, studying the effect of varying dimen- sions and spacing of the crystal elements as well as their acoustic absorption in the sound attenuation provided by the global structure, in what concerns typical traffic noise sources, and establishing some broad indications for the use of those structures.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 2.

Tytuł:: Numerical analysis of stress intensity factor in specimens with different fillet geometry subjected to bending
Autorzy:: Lewandowski, J.
Rozumek, D.
Tematy:: numerical method
fatigue crack growth
bending; Pokaż więcej
Wydawca:: Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Powiązania:: https://bibliotekanauki.pl/articles/387467.pdf Link otwiera się w nowym oknie
Opis:: The article presents the maps of xx stress component and compares values of analytical and numerical calculations for the stress intensity factor range of welded specimens with fillet welds which subjected to cyclic bending. The tests were performed under constant value of moment amplitude Ma = 9.20 Nm and stress ratio R = σmin/ σmax = -1. The specimens were made of drag steel rod S355. The specimens were solid and welded. The numerical models were simulated with ABAQUS suite and numerical calculations performed with FRANC3D software.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 3.

Tytuł:: Raport Badawczy = Research Report ; RB/61/2004
Comparison of Numeral Methods for Solution of Wheel - Rail Contact Problems with Friction
Autorzy:: Piotrowski, Jerzy
Nagórski, Zdzisław (1947– )
Myśliński, Andrzej
Chudzikiewicz, Andrzej (1949– )
Wydawca:: Instytut Badań Systemowych. Polska Akademia Nauk
Systems Research Institute. Polish Academy of Sciences
Powiązania:: Raport Badawczy = Research Report
Opis:: Bibliografia s. 29-32
32 pages ; 21 cm
Bibliography p. 29-32
This paper deals with the numerical solution of wheel - rail rolling contact problems. The unilateral contact problem between a elastic body and a rigid foundation is considered. The contact with Coulomb friction law occurs at a portion of the boundary of the body. The contact condition is described in displacements. The friction coefficient is assumed to be bounded and suitable small. A frictional heat generation and heat transfer across the contact surface is assumed. The equlibrium state of this contact problem is described by the coupled hyperbolic variational inequality of the second order and a parabolic equation. This problem is solved numerically using a quasistatic approach. The proposed method is compared with Green function approach and the method implemented in Fastsim algorithm. Numerical examples are provided and discussed.
32 stron ; 21 cm
Dostawca treści:: RCIN - Repozytorium Cyfrowe Instytutów Naukowych

Książka

na półce

Skocz do pozycji: 4.

Tytuł:: Real time computer tester for automatic voltage regulators used in marine generators
Autorzy:: Płachtyna, O.
Bastian, B.
Kutsyk, A.
Tematy:: synchronous generator
mathematical model
numerical method
real time; Pokaż więcej
Wydawca:: Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Powiązania:: https://bibliotekanauki.pl/articles/378183.pdf Link otwiera się w nowym oknie
Opis:: This article briefly introduces the characteristics of ships' electrical power networks, and an existing system is described as an example. A mathematical model of a selected power system, including generators with a drive and its loads, is presented. The algorithm implementing the author's numerical method, named 'the average step voltages method', is described. The chosen numerical method is notable for its stability and high accuracy, even in combination with a large integration step size. Software and hardware applications of the RT AVR tester are also shown. To check the adequacy of the simulations using the implemented model, experimental measurements were carried out. The measurements, including dynamic states, obtained by the computer tester with the AVR system, as well as the physical model with the AVR system, are summarized. Possibilities for usage in the marine industry in the future are also outlined.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 5.

Tytuł:: Charakterystyka metod numerycznych stosowanych do rozwiązywania bilansu populacji komórek
Characteristic of numerical methods applied for the solution of cell population balance models
Autorzy:: Cudak, M.
Bitenc, M.
Tematy:: bilans populacji
metody numeryczne
population balance
numerical method; Pokaż więcej
Wydawca:: Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Powiązania:: https://bibliotekanauki.pl/articles/2070492.pdf Link otwiera się w nowym oknie
Opis:: W pracy przedstawiono dostępne w literaturze metody numeryczne stosowane do rozwiązywania równań bilansu populacji komórek. Metody te zostały podzielone na trzy grupy: metody różnic skończonych, metody widmowe oraz metody elementów skończonych. Scharakteryzowano te metody oraz przedstawiono ich zalety i wady.
Available in literature numeric methods applied to solve the cell population balance equations are presented in this work. The methods are divided into three groups: finite differences methods, spectral methods and finite element methods. These methods are shortly described. Advantages and disadvantages of the methods analysed are shown.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 6.

Tytuł:: Matematicheskaja model dvizhenija vzaimodejjstvujushhikh semjan po naklonnojj vibrirujushhejj poverkhnosti i chislennye metody reshenija sistem kinematicheskikh uravnenijj
Mathematical model of motion of interactive seed on sloping vibrating surface and numeral methods of decision of systems of kinematics equalizations
Autorzy:: Lukjanenko, V.
Tematy:: seed
division
mathematical model
numerical method
equation
kinematic model; Pokaż więcej
Wydawca:: Komisja Motoryzacji i Energetyki Rolnictwa
Powiązania:: https://bibliotekanauki.pl/articles/76448.pdf Link otwiera się w nowym oknie
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 7.

Tytuł:: A subinterval-based method for circuits with fractional order elements
Autorzy:: Sowa, M.
Tematy:: fractional derivative
circuit equations
numerical method
polynomial interpolation
subinterval; Pokaż więcej
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Powiązania:: https://bibliotekanauki.pl/articles/201236.pdf Link otwiera się w nowym oknie
Opis:: The paper deals with the solution of problems that concern fractional time derivatives. Specifically the author’s interest lies in solving circuit problems with so called fractional capacitors and fractional inductors. A numerical method is proposed that involves polynomial interpolation and the division of the entire time interval (for which computations are performed) into subintervals. Analytical formulae are derived for the integro-differentiation according to the Caputo fractional derivative. The rules that concern the subinterval dynamics throughout the computation are also presented in the paper. For exemplary linear circuit problems (AC and transient) involving fractional order elements the solutions have been obtained. These solutions are compared with ones obtained by means of traditional methods.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 8.

Tytuł:: A numerical approach in applying panel method for the added mass of a group of sections in fluids
Autorzy:: Zhang, D.
Li, P.
Wang, Q.
Yang, Y.
Tematy:: numerical method
panel method
fluid-structure interaction
confined fluid
fluid mass coefficients; Pokaż więcej
Wydawca:: Instytut Podstawowych Problemów Techniki PAN
Powiązania:: https://bibliotekanauki.pl/articles/38695713.pdf Link otwiera się w nowym oknie
Opis:: This paper firstly expands an efficient numerical methodology developed from the source panel method to the added mass calculation of long column systems in fluid. Structures submerged in fluid are considered as two-dimensional and are discretized into a number of source panels. The influence coefficient matrices and the potential function are then calculated and the fluid forces are calculated by the unsteady Bernoulli equation. Finally, we utilize this present method to calculate the mass coefficients of some typical problems, which effectively verifies its feasibility and accuracy. This method takes into account both applicability and computational efficiency. On the one hand, in contrast to the analytical method which is only applicable to specific cross-sections, this method is applicable to arbitrary boundaries with C⁰ continuity in mathematics. On the other hand, this method requires less mesh and computation than commercial software. This paper extends the application of the source panel method which is widely used in aerodynamics to provide a reference for added mass calculation problems in engineering.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 9.

Tytuł:: Modeling magnetic field in the vicinity of single wire helix
Autorzy:: Budnik, K.
Machczyński, W.
Tematy:: magnetic wire helix
analytical-numerical method
Biot-Savart law; Pokaż więcej
Wydawca:: Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Powiązania:: https://bibliotekanauki.pl/articles/97738.pdf Link otwiera się w nowym oknie
Opis:: Transmission of the electric power is accompanied with generation of low - frequency electromagnetic fields. Electromagnetic compatibility studies require that the fields from sources of electric power be well known. Many of these sources are not defined to the desired degree of accuracy. This applies e.g. to the case of helical current conductors of finite length. The paper presents an analytical-numerical method of the calculation of the 3D magnetic fields in vicinity of conductors having helical structure. The method is based on the Biot-Savart law and a software tool to model the magnetic fields generated by e.g. twisted wires, helical coils, etc can use the formulas obtained.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Skocz do pozycji: 10.

Tytuł:: Forma osi gibkojj neszhimaemojj polosy pri ee tolkanii po naklonnojj sherokhovatojj ploskosti s postojannojj skorostju
Form of axis of flexible incompressible bar at its pushing on rough ramp with permanent speed
Autorzy:: Pylypaka, S.
Nesvidomin, A.
Zaharova, T.
Tematy:: differential equation
motion
friction
movement speed
slope angle
numerical method; Pokaż więcej
Wydawca:: Komisja Motoryzacji i Energetyki Rolnictwa
Powiązania:: https://bibliotekanauki.pl/articles/78098.pdf Link otwiera się w nowym oknie
Opis:: Worked out differential equations of the motion of flexible incompressible bar on a rough ramp at its pushing with permanent speed. The special cases of the motion are considered without friction, at the different angles of slope of plane, at the different corners of entry of bar on a plane. The form of axis of bar for the considered cases was found by the numeral methods of integration.
Dostawca treści:: Biblioteka Nauki

Artykuł

na półce

Informacja

Wyszukujesz frazę "numerical method" wg kryterium: Temat