Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "reliquefaction" wg kryterium: Temat


Wyświetlanie 1-7 z 7
Tytuł:
The operation limitation of the two-stage reliquefaction cycle employed on board the ethylene carrier
Autorzy:
Nanowski, D.
Tematy:
ethylene carrier
cargo-cooling rate
reliquefaction plant
Pokaż więcej
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Powiązania:
https://bibliotekanauki.pl/articles/242707.pdf  Link otwiera się w nowym oknie
Opis:
Ethylene, propane, commercial propane or HD-5 is cargoes very often carried by sea. In order to reduce the time of loading and later cooling down to required parameters of temperature and pressure in the cargo tanks two-stage reliquefaction cycle is used. For above-mentioned cargoes, two-stage cycle with liquid subcooling and interstage cooler is one of the most often utilized. In this paper operation of this cycle is discussed, based on parameters of the reciprocating cargo compressor and its cycle used on board the one of the biggest – 21 500 m3 – ethylene carrier in the world. It is explained how some vapour mixtures decrease cooling rate during reliquefaction of the cargo and some parameters of pressure and temperature of these mixtures are calculated with help of ProSimPlus – thermodynamic simulator. In this way, changes of the mixtures composition across reliquefaction plant are discussed. Increased pressure of the cargoes condensing as a way of solving of explained problem is analysed. Three stage – cycle of reliquefaction plant used for pure propane or ethylene is shown and some of its disadvantages are explained. Based on this discussion, three-stage cycle with liquid injection is proposed to fulfil operation requirements of the cargoes and improve their loading and cooling processes on board the ethylene carrier. Analysis of refrigeration capacity for both cycles is carried out.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of incondensible gases on the refrigeration capacity of the reliquefaction plant during ethylene carriage by sea
Autorzy:
Nanowski, D.
Tematy:
ethylene carrier
cargo cooling rate
reliquefaction plant
Pokaż więcej
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Powiązania:
https://bibliotekanauki.pl/articles/246338.pdf  Link otwiera się w nowym oknie
Opis:
This paper presents a performance of the reliquefaction cascade plant during ethylene carriage by sea. Parameters of this plant are discussed because of dramatic low cooling rate of the cargo. Ability to decrease ethylene temperature from approx. minus 96°C to minus 103°C on board the ship is essential. Modern ethylene carriers are able to keep cooling rate about 2K per day, on the other hand old ones do it with rate approx. 0,2 K per day and require weeks to achieve proper temperature of ethylene for discharging. Of course, economic issue of such journey is not very satisfying but many factors influence on this. In this paper almost new one – nine months – old ship is considered, with capacity 21 000m3. Main reason of problem is analysed, including heat ingress through the cargo tanks insulation. Gassing-up of the ship is explained and influence of presence incondensable gases in the cargo tanks described. Operation of the reliquefaction plant is shown, especially with the vent valve of LPG condenser. Analysis of pressures in the cargo tanks is carried out – on board the ship and with help of ProSimPlus – thermodynamic simulator. Conclusions contain discussion of the reliquefaction plant problems and remarks what should be improved on board the ethylene carrier to avoid such problems.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
On board LNG reliquefaction technology: a comparative study
Autorzy:
Gómez, J.
Gómez, M.
Garcia, R.
Catoira, A.
Tematy:
reliquefaction
boil-off gas
vessel
Brayton Cycle
efficiency
Pokaż więcej
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Powiązania:
https://bibliotekanauki.pl/articles/963412.pdf  Link otwiera się w nowym oknie
Opis:
Reliquefaction technologies are being currently applied on board liquefied natural gas (LNG) carriers on the basis of economic criteria and energy efficiency. A variety of reliquefaction techniques have been developed so far during the last decade. Nevertheless, technology enhancement continues being a research area of interest. In this article the different technologies applied to the reliquefaction of the boil-off gas (BOG) on LNG carriers have been described, analysed and discussed, contributing to highlight the process and operation characteristics as well as selection plant criteria. Finally, a comparison of the different reliquefaction plants, considering their capacities and efficiencies as well as other technical data of interest has been carried out.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The comparison of theoretical to practical cargo loading rate of butane - analysis of LPG carrier reliquefaction plant
Autorzy:
Nanowski, D.
Tematy:
LPG carrier
cargo loading rate
CC4 – cargo
Butane
reliquefaction plant
Pokaż więcej
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Powiązania:
https://bibliotekanauki.pl/articles/241629.pdf  Link otwiera się w nowym oknie
Opis:
This paper presents a performance of reliquefaction plant analysis in order to assess possible cargo loading rate for Butane (C4H10). The highest cargo loading rate is essential in use of LPG carriers because of economical point of view. Loading and discharging cargo time at ports substantially influences on a financial effect of the ship owner. Because of different cargo grades, which number is continuously increasing, crucial is to know real efficiency of gas plan, before signing some contract with customer. On board these types of ships the highest efficiency of reliquefaction plant is crucial. After short description of fully refrigerated gas carrier, theoretical data of analysed ship, taken from ship documentation is shown. Taking into account this data, expected cargo compressors parameters and cargo loading rate are discussed, explained and assumed. In next step, real ambient Butane loading process carried out on board LPG carrier is described. All essential values and reliquefaction plant readings, taken in loading port are presented. The comparison of theoretical result based on available documentation to practical effects obtained in the port is performed. Analysis, mainly taking into account gas plan, answers if it operated with the highest possible efficiency and met cargo loading parameters expected according to ship manuals. Conclusions are discussed.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of fuel cold energy in CO2 BOG reliquefaction system on ammonia-powered CO2 carrier
Autorzy:
Lin, Yiqun
Lu, Jie
Li, Boyang
Li, Yajing
Yang, Qingyong
Tematy:
mmonia-powered CO2 carrier
liquid ammonia cold energy
CO2 BOG
reliquefaction system
Aspen HYSYS
Pokaż więcej
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Powiązania:
https://bibliotekanauki.pl/articles/34608726.pdf  Link otwiera się w nowym oknie
Opis:
A CO2 boiled off gas (CO2 BOG) reliquefaction system using liquid ammonia cold energy is designed to solve the problems of fuel cold energy waste and the large power consumption of the compressor in the process of CO2 BOG reliquefaction on an ammonia-powered CO2 carrier. Aspen HYSYS is used to simulate the calculation, and it is found that the system has lower power consumption than the existing reliquefaction method. The temperature of the heat exchanger heater-1 heat flow outlet node (node C-4) is optimised, and it is found that, with the increase of the node C-4 temperature, the power consumption of the compressor gradually increases, and the liquefaction fraction of CO2 BOG gradually decreases. Under 85% conditions, when the ambient temperature is 0°C and the temperature of node C-4 is -9°C, the liquid fraction of CO2 BOG reaches the maximum, which is 74.46%, and the power of Compressor-1 is the minimum, which is 40.90 kW. According to this, the optimum temperature of node C-4 under various working conditions is determined. The exergy efficiency model is established, in an 85% ship working condition with the ambient temperature of 40°C, and the exergy efficiency of the system is the maximum, reaching 59.58%. Therefore, the CO2 BOG reliquefaction system proposed in this study could realise effective utilisation of liquid ammonia cold energy.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characterization of the Reliquefaction Systems installed on board of the LNG ships
Charakterystyka Systemów Skraplania Gazu BOG stosowanych na statkach do przewozu skroplonego gazu LNG
Autorzy:
Matyszczak, M.
Kaszycki, L.
Tematy:
gaz LNG
gaz BOG
systemy skraplania gazu BOG
sprężarka wirowa
rozprężarka turbinowa
compander
QMAX
QFLEX
gas LNG
gas BOG
BOG reliquefaction systems
centrifugal compresso
expander
Q-FLEX
Pokaż więcej
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Powiązania:
https://bibliotekanauki.pl/articles/360515.pdf  Link otwiera się w nowym oknie
Opis:
The article refers to BOG reliquefaction plants installed on the new generation LNG ships board. The construction, principle of operation and properties of the Hamworthy reliquefaction systems MARK I and MARK III were described. The layout diagrams and the process flow charts of these systems were enclosed. The construction comparisons of both systems were carried out and technology development advantages of the reliquefaction systems were presented.
Artykuł dotyczy systemów skraplania gazu BOG stosowanych na najnowszych statkach LNG. Opisano w nim budowę i zasadę działania dwóch systemów skraplania MARK I i MARK III firmy HAMWORTHY. Zamieszczono schematy funkcjonalne tych systemów. Scharakteryzowano i porównano konstrukcje i właściwości obu systemów.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Trendy rozwoju układów napędowych gazowców LNG
Developments of Propulsion Systems of LNG Carriers
Autorzy:
Chądzyński, W.
Tematy:
LNG
EXPLO-SHIP 2006
ubytki ładunku
układ napędowy
układ ponownego skraplania
turbina parowa
silnik spalinowy dwupaliwowy
boil-off
propulsion system
reliquefaction plant
steam turbine
dual fuel diesel engine
Pokaż więcej
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Powiązania:
https://bibliotekanauki.pl/articles/359459.pdf  Link otwiera się w nowym oknie
Opis:
Zdolności przewozowe światowej floty gazowców LNG rosną gwałtownie, a ilość zamówień na nowe statki wzrasta bardzo dynamicznie. Niewykluczone, że budowa gazowców LNG zostanie podjęta także w naszym kraju. W niniejszej pracy zostaną przedstawione wymagania, jakie stawiane są przed układem napędowym gazowca LNG, sposoby wykorzystania naturalnych ubytków LNG podczas rejsu, warianty możliwych do zastosowania układów napędowych wraz z ich cechami eksploatacyjnymi, szkic założeń do badań nad optymalnym rozwiązaniem układu napędowego w powiązaniu z wielkością statku.
The global LNG shipping capacity is growing sharply and the number of ordered LNG carriers is very high at the moment. It is possible that Poland will appear among experienced builders of those ships. The author considers the requirements for propulsion systems of modern LNG carriers, the methods of utilising boil-off gas, different alternatives of power sources. Besides, the paper introduces a preliminary idea of research on an optimal solution of propulsion system closely related with the size of the vessel.
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-7 z 7

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies