Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "surface activity" wg kryterium: Temat


Tytuł:
Properties of fatty acid/dodecylamine mixtures and their application in steam coal reverse flotation
Autorzy:
Shen, L.
Wang, H.
Tematy:
steam coal
surfactant mixture
reverse flotation
fatty acids
surface activity
Pokaż więcej
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Powiązania:
https://bibliotekanauki.pl/articles/109571.pdf  Link otwiera się w nowym oknie
Opis:
A series of surfactant mixtures which consist of DAH (dodecylamine hydrochloride) and fatty acids (FAD) were made in this study. The characteristics of these fatty acids/DAH mixtures, including surface tension, critical micelle concentration (CMC) and adsorption onto coal were investigated. The reverse flotation results with these fatty acids/DAH mixtures (FAD) and DAH were compared with each other. Experimental results showed that the fatty acids/ DAH mixtures have lower CMC and γcmc than DAH. The adsorption test indicated that more amine molecules would adsorb preferentially onto the bubbles surface in FAD solutions than that in DAH solutions. Reverse flotation results showed that about 50% surfactant dosage was saved under the same froth product yield. Only 28% froth product yield was obtained in the presence of 1.66 kg/Mg DAH. However, when 0.83 kg/Mg hexadecanoic acid/DAH mixture (C16D) surfactant was used, the froth product yield reached 29%. Dodecanoic acid/DAH mixture (C12D) surfactant a showed better performance with a high mineral matter recovery similar to that with tetradecanoic acid/DAH mixture (C14D) and higher combustible recovery than with C14D and C16D.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Oddziaływanie nanocząsteczek haloizytu na surfaktant płucny
Influence of halloysite nanoparticles on pulmonary surfactant
Autorzy:
Kondej, D.
Sosnowski, T. R.
Tematy:
nanocząstki
haloizyt
surfaktant płucny
aktywność powierzchniowa
nanoparticles
halloysite
pulmonary surfactant
surface activity
Pokaż więcej
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Powiązania:
https://bibliotekanauki.pl/articles/2071498.pdf  Link otwiera się w nowym oknie
Opis:
W pracy przedstawiono wyniki badań wpływu nanocząstek haloizytu, stosowanych w produkcji nanokompozytów polimerowych, na aktywność powierzchniową surlaktantu płucnego. Stwierdzono zależną od stężenia redukcję właściwości powierzchniowo czynnych modelowego surfaktantu płucnego przez nanorurki haloizytu. Osłabienie aktywności powierzchniowej surfaktantu płucnego przez badane nanocząstki może mieć znaczący wpływ w rozwoju chorób zawodowych układu oddechowego. Badania umożliwią wytypowanie bezpieczniejszych dla zdrowia nanocząstek, które mogą być stosowane w produkcji tworzyw sztucznych.
The influence of halloysitc nanoparticlcs used in the manufacture of polymer nanocompositcs on the surface activity of pulmonary surfactant was studied. It was found the reduction of the surface activc properties of model pulmonary surfactant dependens on the concentration of halloysitc nano-tubes. Deactivation of pulmonary surfactant can have a significant impact in the development of occupational respiratory diseases. The research will help predict the nanoparticles, which can be used in the manufacture of plastics.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study of N, N-bis (2-hydroxyethyl) -N-methyl dodecyl ammonium chloride as the novel collector in selective flotation separation of quartz and hematite
Autorzy:
Liu, Wenbao
Liu, Wengang
Zhao, Qiang
Wang, Xinyang
Duan, Hao
Peng, Xiangyu
Wang, Benying
Tematy:
quaternary ammonium salts
high surface activity
quartz
hematite
interaction mechanisms
flotation separation
Pokaż więcej
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Powiązania:
https://bibliotekanauki.pl/articles/949694.pdf  Link otwiera się w nowym oknie
Opis:
A quaternary ammonium salt, N, N-bis (2-hydroxyethyl)-N-methyl dodecyl ammonium chloride (BHMDC), with high surface activity, was screened and firstly introduced in the reverse flotation of hematite ores based on Density Functional Theory (DFT) calculation and surface tension measurement. The interaction mechanism of BHMDC on the surfaces of quartz and hematite was studied by zeta potential measurement, X-ray photoelectron spectroscopy (XPS) and Fourier transforms infrared spectroscopy (FTIR), respectively. The results of DFT calculation and surface tension measurement indicated that BHMDC had higher selectivity and hydrophobicity than dodecylamine (DDA). The analyses of zeta potential measurement, FTIR, and XPS demonstrated that the adsorption of BHMDC on hematite and quartz surfaces were mainly dependent on hydrogen bonding and electrostatic interaction. Due to the more active sites (O atoms), the weaker charge and larger size of polar groups, BHMDC had better simulation results in performance than DDA, especially in selectivity. The flotation tests showed that BHMDC exhibited better flotation performance, which was consistent with the results of DFT calculation. And the efficient separation of hematite and quartz within the wide pH value range (4.0-10.0) was determined, which was also confirmed by zeta potential measurement. It also indicated that BHMDC was an excellent collector in the reverse flotation of hematite ores with great industrial potential, which could obtain the concentrate with the Fe grade of 65.37% and recovery of 88.92%
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Assessment of the Pulmonary Toxicity of Inhaled Gases and Particles With Physicochemical Methods
Autorzy:
Sosnowski, T. R.
Podgórski, A.
Tematy:
pulmonary surfactant
surface activity
pulsating bubble technique
langmuir balance
hysteresis
histereza
toksyczność
wdychanie
Pokaż więcej
Wydawca:
Centralny Instytut Ochrony Pracy
Powiązania:
https://bibliotekanauki.pl/articles/90050.pdf  Link otwiera się w nowym oknie
Opis:
Physicochemical techniques used for evaluating the pulmonary surfactant (PS) quality are discussed as methods useful in assessing toxicity of inhaled gases and particles. Two standard devices, Langmuir-Wilhelmy film balance and pulsating bubble apparatus, are presented in detail, and the measured results of interaction between sulfuric acid and 2 models of PS material are analyzed. The evident decrease in surface activity of the pulmonary surfactant after its contact with the acid at concentrations approaching 0.001 M may be considered as an indicator of the adverse effect, which can result in several health problems. The presented approach can be used as a method of assessing pulmonary toxicity of any substances present in the breathing air.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ nanocząstek tlenku ceru na aktywność powierzchniową surfaktantu płucnego
The Influence of Cerium Oxide Nanoparticles on the Surface Activity of Pulmonary Surfactant
Autorzy:
Kondej, D.
Sosnowski, T. R.
Tematy:
tlenek ceru
nanocząstki
surfaktant płucny
aktywność powierzchniowa
cerium oxide
nanoparticles
pulmonary surfactant
surface activity
Pokaż więcej
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Powiązania:
https://bibliotekanauki.pl/articles/1818044.pdf  Link otwiera się w nowym oknie
Opis:
In recent years there has been an intensive development of industries that use or produce materials in the nano scale. Nanomaterials contribute to the improvement of the product parameters, but when inhaled can also negatively affect the human body. The aim of the study was to investigate the effect of cerium oxide nanoparticles on the surface activity of pulmonary surfactant (PS) forming a thin film separating the inhaled air from the alveolar epithelium. Three types of cerium oxide powders were used (Sigma-Aldrich): C1 having a particle size smaller than 25 nm, C2 having a particle size smaller than 50 nm, and for comparison purposes C3 having a particle size smaller than 5 µm. Measurement of specific surface area was carried out using a Gemini 2360 surface area analyzer (Micromeritics, USA). The effect of cerium oxide nanoparticles on the surface activity of PS was studied using DeltaPi microtensiometer (Kibron Inc., Finland). Reconstituted animal surfactant preparation (Beractantum; Abbott Laboratories, France) recommended in states of deficiency of endogenous PS in newborn premature infants, was used as model PS. The tests were carried out at different particle concentrations (ranging up to 1 mg/ml) prepared with the constant concentration of the surfactant solution (1.25 mg phospholipids/ml). The study showed that in all the analyzed cases, the presence of cerium oxide particles caused an increase in surface pressure (lowering of the surface tension) at the liquid-air interface. It was found that the intensity of these changes depends on the particle size, specific surface area and the particle concentration. With the increase in concentrations of the particles in the model surfactant suspension, a greater difference in surface pressure/tension was observed with respect to the initial value. The largest increase in surface pressure (6.4 ± 1.1 mN/m) was observed in the presence of cerium oxide nanoparticles C1, which were characterized by the smallest dimensions (smaller than 25 nm) and the largest surface area (33.3 m2/g). The results show that cerium oxide nanoparticles may have an influence on the surface activity of pulmonary surfactant in vivo and adversely affect the functioning of the human respiratory system.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Symulacja Monte Carlo wielkopowierzchniowego niskotłowego detektora gazowego cząstek alfa
Monte Carlo simulations of lowbackground gaseous detector.
Autorzy:
Bożek, Krzysztof
Opis:
This thesis presents the results of a simulation of a gaseous detector for the measurement of surface alpha activity of materials. The simulations were made using the GEANT and Garfield frameworks. The main purpose of the simulation was to verify the possibility of identification of the particle creation place on the basis of the signal shape. This is crucial for the exclusion of the background coming from detector materials. The results shown in this thesis confirm the capabilities of the proposed detector.
W pracy przedstawiono wyniki symulacji w środowisku GEANT i programie Garfield gazowego detektora mającego służyć do pomiaru aktywności promieniotwórczej materiałów. Głównym celem symulacji było sprawdzenie możliwości identyfikacji miejsca powstania cząstki korzystając z kształtu impulsu. Dzięki znajomości miejsca powstania cząstki możliwe będzie odrzucenie przypadków spowodowanych obecnością naturalnych izotopów promieniotwórczych w detektorze. Wyniki przedstawione w pracy potwierdzają słuszność przyjętej koncepcji detektora.
Dostawca treści:
Repozytorium Uniwersytetu Jagiellońskiego
Inne
Tytuł:
SUBSTITUTED CARBOXAMIDE ANALOGUES AS A NEW CLASS OF LOCAL ANESTHETIC AGENTS: SYNTHESIS AND BIO-EVALUATION
Autorzy:
AlOtaibi, Faisal
Tematy:
hepatotoxicity
Carboxamide
surface local anesthetic activity
infiltration local anesthetic activity
Pokaż więcej
Wydawca:
Polskie Towarzystwo Farmaceutyczne
Powiązania:
https://bibliotekanauki.pl/articles/895677.pdf  Link otwiera się w nowym oknie
Opis:
Abstract: A series of N-(2-oxo-2-(phenylamino) ethyl) substituted-4-carboxamide derivatives were synthesized as local anesthetic agents. The structures of carboxamide derivatives were established on the basis of IR, and 1H spectral data. All the compounds were subjected to surface local anesthetic activity assay and infiltration local anesthetic activity assay. Among the tested compounds, N-(2-oxo-2-(p-tolylamino) ethyl) piperidine-1-carboxamide (4h) and N-(2-((4-methoxyphenyl) amino)-2-oxoethyl) piperidine-1-carboxamide (4m) were most promising compounds in terms of surface local anaesthetic and infiltration local anaesthetic activity on rats having considerably lower liver toxicity. Keywords: Carboxamide, surface local anesthetic activity, infiltration local anesthetic activity, hepatotoxicity.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Solutions of water sterically specific surfactants as model ecological cutting fluids
Roztwory wodne sterycznie specyficznych surfaktantów jako modelowe ekologiczne ciecze obróbkowe
Autorzy:
Sułek, M. W.
Hreczuch, W.
Przepiórka, J.
Adach, A.
Tematy:
cutting fluids
surfactant solutions
sterically specific surfactants
tribological tests
surface activity
ciecze obróbkowe
roztwory surfaktantów
sterycznie specyficzne surfaktanty
badania tribologiczne
aktywność powierzchniowa
Pokaż więcej
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Powiązania:
https://bibliotekanauki.pl/articles/189587.pdf  Link otwiera się w nowym oknie
Opis:
From the large group of surfactants with branched chains, sulfosuccinate derivatives obtained based on 2-ethylhexyl alcohol were selected. The surfactant of reference was ethoxylated sulfosuccinate with an alkyl chain (C12-C14). Tests regarding foam-forming ability (V0) and foam stability (V10) for selected solutions of the three surfactants were performed. Foam stability of the solutions of sterically specific surfactants (P13, P14) decreased by up to a factor of ten as compared with the equivalent linear alkyl chain (P19). This was achieved with the high surface activity of the solutions of these compounds as represented by surface tension and wettability of the surface of the bearing steel. The consequence of the high surface activity of the compounds were low friction and wear in tribological tests at constant load and excellent anti-seizure properties. On the cooperating friction pairs, adsorption layers were formed, effectively separating the two materials and able to transfer the high loads [L. 3]. Summing up, there is the possibility of using solutions of sterically specific surfactants as model cutting fluids with low foaming ability.
Z licznej grupy surfaktantów o rozgałęzionych łańcuchach wybrano pochodne sulfobursztynianowe otrzymane na bazie oksyalkinelowego alkoholu 2-etyloheksylowego. Surfaktantem odniesienia był etoksylowany sulfobursztynian posiadający łańcuch alkilowy (C12-C14). Wykonano testy określające zdolność pianotwórczą (V0) i trwałość piany (V20) wytypowanych roztworów trzech surfaktantów. Trwałość piany roztworów sterycznie specyficznych ZPC (P13, P14) zmniejszyła się nawet dziesięciokrotnie w stosunku do ich odpowiedników z liniowym łańcuchem alkilowym (P19). Efekt ten uzyskano przy wysokiej aktywności powierzchniowej roztworów tych związków, której miarą było napięcie powierzchniowe i zwilżalność powierzchni stali łożyskowej. Konsekwencją wysokiej aktywności powierzchniowej związków były niskie opory ruchu i zużycie w testach tribologicznych przy stałym obciążeniu oraz doskonałe właściwości przeciwzatarciowe. Na współpracujących tarciowo parach ciernych tworzą się warstwy adsorpcyjne skutecznie oddzielające materiały oraz przenoszące wysokie obciążenia. Reasumując, udokumentowano możliwość stosowania roztworów sterycznie specyficznych surfaktantów jako modelowych cieczy obróbkowych o niskiej pianotwórczości.
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Proceedings of ITME 1983 z. 10
Wpływ antymonu na zjawiska powierzchniowe w procesie wytwarzania kompozytu W-CuSb
Wpływ antymonu na zjawiska powierzchniowe w procesie wytwarzania kompozytu W-CuSb = The influence of antimony on the surface phenomena in processing the composite material W - CuSb
Prace ITME 1983 z. 10
Autorzy:
Senkara Jacek
Wydawca:
Wydaw. Przem. Masz. "WEMA"
Powiązania:
Prace ITME
Proceedings of ITME
Opis:
60 s. : il. 24 cm.
Bibliogr. s. 60
Dostawca treści:
RCIN - Repozytorium Cyfrowe Instytutów Naukowych
Książka
Tytuł:
Wpływ pozycji ćwiczeń na efektywność pracy głowy przyśrodkowej mięśnia czworogłowego uda na przykładzie badania sEMG
The impact of exercise position on working efficiency of medial head of quadriceps femoris muscle on the example of sEMG study.
Autorzy:
Polawski, Michał
Opis:
Wstęp: Mięsień obszerny przyśrodkowy uda jest najważniejszym dynamicznym stabilizatorem stawu kolanowego, ponadto pełni ważną funkcje w stabilizacji statycznej oraz zabezpiecza staw kolanowy przed niebezpiecznymi przeciążeniami. Ze względu na budowę anatomiczną, mięsień pracuje z dużą szybkością i siłą, jednak przejawia skłonności do stosunkowo szybkiego osłabiania i zaniku. Zabiegi operacyjne w obrębie stawu kolanowego, oraz hipokinezja mogą przyczynić się do znacznego spadku siły i masy mięśnia, a tym samym prowadzić do jego niewydolności. Odpowiednio przeprowadzona rehabilitacja jest kluczowa w procesie wzmacniania mięśnia obszernego przyśrodkowego uda. Pomimo tego w literaturze można znaleźć niewiele informacji o tym jak w sposób izolowany należy go wzmacniać. Cel: Celem pracy było wyznaczenie pozycji stawu kolanowego w której mięsień obszerny przyśrodkowy uda podczas skurczu, będzie wykazywał największą aktywność bioelektryczną. Materiał: Badaniem objęto 25 studentów kierunków medycznych Collegium Medicum Uniwersytetu Jagiellońskiego. U wszystkich uczestników przeprowadzono obustronne badania mięśnia obszernego przyśrodkowego uda. Dwa przypadki zostały odrzucone nie spełniając kryteriów włączenia. Ostatecznie, analizę statystyczną przeprowadzono dla 48 przypadków. Metody: Pomiar aktywność bioelektrycznej mięśnia obszernego przyśrodkowego uda został przeprowadzony za pomocą elektromiografii powierzchniowej (sEMG). Pomiar potencjałów elektrycznych mięśnia odbywał się w dwóch pozycjach stawu kolanowego – wyprostnej, oraz w zgięciu 90°. Badanie aktywności bioelektrycznej mięśni wykonywano trzykrotnie w każdej z pozycji. W analizie statystycznej posłużono się dwoma badanymi parametrami: średnia wartość pobudzenia i maksymalna wartość pobudzenia mięśnia obszernego przyśrodkowego. Analizę statystyczną przeprowadzono w programie Statistica 13.3 firmy StatSoft.Wyniki: Mięsień obszerny przyśrodkowy uda w sposób istotny statystycznie (p<0,01), wykazuje większą aktywność bioelektryczną w pozycji wyprostu stawu kolanowego, niż podczas zgięcia stawu do 90 stopni. Wynik jest istotny zarówno dla średniej jak i maksymalnej wartości pobudzenia mięśnia.Wnioski: W pozycji wyprostu stawu kolanowego mięsień obszerny przyśrodkowy uda, podczas skurczu izometrycznego, wykazuje największą aktywność bioelektryczną.
Introduction: Vastus medialis muscle is the most important dynamic stabilizer of the knee joint. Also it have very important function in static stabilization and it protect the knee joint from dangerous overloads. Due to anatomic construction this muscle works very fast and with large amount of strength. However it can get weak very fast and extinct without movements. Surgeries within knee joint and hypokinesia may lead to loss of strength and muscle mass. Well planned physiotherapy is the key in process of strengthening of vastus medialis muscle. Regardless, in scientific researches there are not many studies in which we read about how this muscle can strengthen in isolate way. Aim of the study: The aim of this study was assign the position of knee joint in which vastus medialis muscle while contraction will show the highest bioelectrical activity. Material: The study group was composed of 25 students of medical courses from Collegium Medicum Jagiellonian University. Each vastus medialis muscle was evaluated bilateral in every participant. Two cases was rejected because they do not achieve the inclusion criteria. Eventually, the statistic analysis was conducted on 48 cases. Methods: The measurement of bioelectrical activity of vastus medialis muscle was conducted by surface electromyography (sEMG). Evaluation of muscle activity undergo in two position of knee joint – when the knee was extended and when knee was flexed to 90 degrees. Bioelectrical activity was measured three times in each position. The value which was measured in this study and used to statistical analysis of vastus medialis muscle was: mean value of muscle activity [µV] and maximum value of muscle activity [µV]. Statistical analysis was conducted in Statistica 13.3 program from StarSofr company. Results: Bioelectrical activity of vastus medialis muscle is vitally highest (p<0,01) in the knee extention position than in the flexing the knee to 90 degrees. This result is vital as well as for mean and maximum value of muscle activity. Conclusion: The study revealed that vastus medialis muscle in knee extention position while isometric contraction shows the highest bioelectrical activity.
Dostawca treści:
Repozytorium Uniwersytetu Jagiellońskiego
Inne

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies